One-part alkali-activated blast furnace slag for sustainable construction at subzero temperatures

ACI Committee, Guide to cold weather concreting “ACI 306R-10,” Am. Concr. Inst. Farmington Hills Mich. USA. (2010). C.J. Korhonen, Antifreeze admixtures for cold regions concreting: a literature review, Cold Regions Research and Engineering Lab Hanover NH. https://apps.dtic.mil/sti/pdfs/ADA228559.pdf, 1990. Karagol, 2015, Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions, Constr. Build. Mater., 76, 388, 10.1016/j.conbuildmat.2014.12.011 Polat, 2016, The effect of antifreeze additives on fresh concrete subjected to freezing and thawing cycles, Cold Reg. Sci. Technol., 127, 10, 10.1016/j.coldregions.2016.04.008 M.R. Rixom, N. Mailvaganam, Chemical admixtures for concrete . London: E & FN Spon, New York: Routledge, 1999. C.J. Korhonen, Off-the-shelf antifreeze admixtures, Engineer Research and Development Center (ERDC), Cold Regions Research and Engineering Laboratory (CRREL), Hanover, New Hampshire. https://apps.dtic.mil/dtic/tr/fulltext/u2/a401312.pdf, 2002. A.M. Bakri, H. Kamarudin, M. Binhussain, I.K. Nizar, A.R. Rafiza, Y. Zarina, Comparison of geopolymer fly ash and ordinary portland cement to the strength of concrete, Adv. Sci. Lett. 19 (2013) 3592–3595. https://doi.org/10.1166/asl.2013.5187 M. Cyr, R. Pouhet, The frost resistance of alkali-activated cement-based binders, in: Handb. Alkali-Act. Cem. Mortars Concr., Elsevier, 2015: pp. 293–318. https://doi.org/10.1533/9781782422884.3.293. Albitar, 2017, Durability evaluation of geopolymer and conventional concretes, Constr. Build. Mater., 136, 374, 10.1016/j.conbuildmat.2017.01.056 Bakharev, 2005, Resistance of geopolymer materials to acid attack, Cem. Concr. Res., 35, 658, 10.1016/j.cemconres.2004.06.005 Kong, 2010, Effect of elevated temperatures on geopolymer paste, mortar and concrete, Cem. Concr. Res., 40, 334, 10.1016/j.cemconres.2009.10.017 Sarker, 2014, Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete, Mater. Des., 63, 584, 10.1016/j.matdes.2014.06.059 Luukkonen, 2018, One-part alkali-activated materials: A review, Cem. Concr. Res., 103, 21, 10.1016/j.cemconres.2017.10.001 Luukkonen, 2018, Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar, J. Cleaner Prod., 187, 171, 10.1016/j.jclepro.2018.03.202 Gu, 2015, Properties and microstructure of alkali-activated slag cement cured at below- and about-normal temperature, Constr. Build. Mater., 79, 1, 10.1016/j.conbuildmat.2014.12.068 Wang, 2017, Low temperature depolymerization and polycondensation of a slag-based inorganic polymer, Ceram. Int., 43, 9067, 10.1016/j.ceramint.2017.04.052 Yang, 2018, First structural use of site-cast, alkali-activated slag concrete in China, Proceedings of the Institution of Civil Engineers - Structures and Buildings, 171, 800, 10.1680/jstbu.16.00193 Ye, 2015, Performance Evolutions of Tailing-Slag-Based Geopolymer Under Severe Conditions, Journal of Sustainable Cement-Based Materials, 4, 101, 10.1080/21650373.2015.1030000 Castellano, 2016, The effect of w/b and temperature on the hydration and strength of blastfurnace slag cements, Constr. Build. Mater., 111, 679, 10.1016/j.conbuildmat.2015.11.001 Salman, 2014, Effect of curing temperatures on the alkali activation of crystalline continuous casting stainless steel slag, Constr. Build. Mater., 71, 308, 10.1016/j.conbuildmat.2014.08.067 Türker, 2016, Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level, Constr. Build. Mater., 104, 169, 10.1016/j.conbuildmat.2015.12.070 Ye, 2015, Influence of critical viscosity and its temperature on the slag behavior on the wall of an entrained coal gasifier, Appl. Therm. Eng., 87, 175, 10.1016/j.applthermaleng.2015.05.027 Dong, 2020, Development of high strength one-part geopolymer mortar using sodium metasilicate, Constr. Build. Mater., 236, 117611, 10.1016/j.conbuildmat.2019.117611 EN 196-1, Methods of testing Cement. Part 1: Determination of Strength., (2016). E. Kilpi, A. Sarja, Builder’s guide to safe winter concreting, VTT Technical Research Centre of Finland, 1983. https://cris.vtt.fi/en/publications/builders-guide-to-safe-winter-concreting (accessed September 10, 2020). ASTM C597, Standard test method for pulse velocity through concrete. ASTM International, West Conshohocken, PA, USA. www.astm.org, (2009). www.astm.org (accessed October 24, 2019). Abdollahnejad, 2020, Durability of the Reinforced One-Part Alkali-Activated Slag Mortars with Different Fibers, Waste Biomass Valorization. Ghosh, 2018, Estimation of geopolymer concrete strength from ultrasonic pulse velocity (UPV) using high power pulser, Journal of Building Engineering, 16, 39, 10.1016/j.jobe.2017.12.009 Zhang, 2011, Comparison of methods for arresting hydration of cement, Cement and Concrete Research, 41, 1024, 10.1016/j.cemconres.2011.06.003 J. Xing, Y. Zhao, J. Qiu, X. Sun, Microstructural and Mechanical Properties of Alkali Activated Materials from Two Types of Blast Furnace Slags, Materials. 12 (2019) 2089. https://doi.org/10.3390/ma12132089 Falah, 2020, Improvement of mechanical strength of alkali-activated materials using micro low-alumina mine tailings, Constr. Build. Mater., 248, 118659, 10.1016/j.conbuildmat.2020.118659 Zhang, 2020, Novel selection of environment-friendly cementitious materials for winter construction: Alkali-activated slag/Portland cement, J. Cleaner Prod., 258, 120592, 10.1016/j.jclepro.2020.120592 Zhu, 2018, Characterisation of pore structure development of alkali-activated slag cement during early hydration using electrical responses, Cem. Concr. Compos., 89, 139, 10.1016/j.cemconcomp.2018.02.016 Raoult, 1887, Loi générale des tensions de vapeur des dissolvants, CR Hebd Seances Acad Sci., 104, 1430 Clapeyron, 1834, Mémoire sur la puissance motrice de la chaleur, J. LÉcole Polytech., 14, 153 Barna, 2011, Energy-Efficient Approach to Cold-Weather Concreting, J. Mater. Civ. Eng., 23, 1544, 10.1061/(ASCE)MT.1943-5533.0000262 T.C. Powers, T.F. Willis, The air requirement of frost resistant concrete, in: Highw. Res. Board Proc., 1950. https://trid.trb.org/view/101611. A. Alzaza, M. Mastali, P. Kinnunen, L. Korat, Z. Abdollahnejad, V. Ducman, M. Illikainen, Production of Lightweight Alkali Activated Mortars Using Mineral Wools, Materials. 12 (2019) 1695. https://doi.org/10.3390/ma12101695 Foley, 2015, Placing Winter Concrete: Pearl Harbor Memorial Bridge, Pract. Period. Struct. Des. Constr., 20, 04014037, 10.1061/(ASCE)SC.1943-5576.0000236 M. Mastali, A. Alzaza, K. Mohammad Shaad, P. Kinnunen, Z. Abdollahnejad, B. Woof, M. Illikainen, Using carbonated BOF slag aggregates in alkali-activated concretes, Materials. 12 (2019) 1288. https://doi.org/10.3390/ma12081288 Leslie, 1949, An ultrasonic method of studying deterioration and cracking in concrete structures, J. Am. Concr. Inst., 21, 17 Brough, 2000, Automated identification of the aggregate–paste interfacial transition zone in mortars of silica sand with Portland or alkali-activated slag cement paste, Cem. Concr. Res., 30, 849, 10.1016/S0008-8846(00)00254-4 Fang, 2020, The evolution of interfacial transition zone in alkali-activated fly ash-slag concrete, Cem. Concr. Res., 129, 105963, 10.1016/j.cemconres.2019.105963 San Nicolas, 2015, The interfacial transition zone in alkali-activated slag mortars, Front. Mater., 2, 70, 10.3389/fmats.2015.00070 Scrivener, 2004, The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete, Interface Sci., 12, 411, 10.1023/B:INTS.0000042339.92990.4c Fagerlund, 1973, Determination of pore-size distribution from freezing-point depression, Mat. Constr., 6, 215, 10.1007/BF02479036 Norton, 2009, Simulation of high pressure freezing processes by enthalpy method, J. Food Eng., 91, 260, 10.1016/j.jfoodeng.2008.08.031 P.W. Bridgman, Water, in the liquid and five solid forms, under pressure, in: Proc. Am. Acad. Arts Sci., JSTOR, 1912: pp. 441–558. https://doi.org/10.4159/harvard.9780674287792.c9. Everett, 1961, The thermodynamics of frost damage to porous solids, Trans. Faraday Soc., 57, 1541, 10.1039/tf9615701541 Everett, 1965, Capillary Properties of Some Model Pore Systems with Special Reference to Frost Damage, RILEM Reun, Int Lab Essais Rech Mater Constr., 27, 31 J.R. Blachere, J.E. Young, The freezing point of water in porous glass, J. Am. Ceram. Soc. 55 (1972) 306–308. https://doi.org/10.1111/j.1151-2916.1972.tb11291.x. S.H. Dong, D.C. Feng, S.H. Jiang, W.Z. Zhu, Effect of Freezing Temperature on the Microstructure of Negative Temperature Concrete, in: Adv. Mater. Res., Trans Tech Publ, 2013: pp. 343–348. https://doi.org/10.4028/www.scientific.net/AMR.663.343 Li, 2014, Effect of self-desiccation on the pore structure of paste and mortar incorporating 70% GGBS, Constr. Build. Mater., 51, 329, 10.1016/j.conbuildmat.2013.10.063 Persson, 1997 Ballekere Kumarappa, 2018, Autogenous shrinkage of alkali activated slag mortars: Basic mechanisms and mitigation methods, Cem. Concr. Res., 109, 1, 10.1016/j.cemconres.2018.04.004 Myers, 2013, Generalized Structural Description of Calcium–Sodium Aluminosilicate Hydrate Gels: The Cross-Linked Substituted Tobermorite Model, Langmuir, 29, 5294, 10.1021/la4000473 Kim, 2013, Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag, Cem. Concr. Res., 54, 208, 10.1016/j.cemconres.2013.09.011 Wang, 2019, Silico-aluminophosphate and Alkali-aluminosilicate Geopolymers: A comparative review, Front. Mater., 6, 106, 10.3389/fmats.2019.00106 Cui, 2008, A study on electrical conductivity of chemosynthetic Al2O3–2SiO2 geoploymer materials, J. Power Sources, 184, 652, 10.1016/j.jpowsour.2008.03.021 Akturk, 2019, Effect of calcium hydroxide on fresh state behavior of sodium carbonate activated blast furnace slag pastes, Constr. Build. Mater., 212, 388, 10.1016/j.conbuildmat.2019.03.328 S. Alonso, A. Palomo, Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio, Mater. Lett. 47 (2001) 55–62. https://doi.org/10.1016/S0167-577X(00)00212-3 Sindhunata, J.L. Provis, G.C. Lukey, H. Xu, J.S. van Deventer, Structural evolution of fly ash based geopolymers in alkaline environments, Ind. Eng. Chem. Res. 47 (2008) 2991–2999. https://doi.org/10.1021/ie0707671 D.H. Everett, Manual of symbols and terminology for physicochemical quantities and units, appendix II: Definitions, terminology and symbols in colloid and surface chemistry, Pure Appl. Chem. 31 (1972) 577–638. https://doi.org/10.1351/pac197231040577 Provis, 2012, X-ray microtomography shows pore structure and tortuosity in alkali-activated binders, Cem. Concr. Res., 42, 855, 10.1016/j.cemconres.2012.03.004