Micro-machining of metals, ceramics and polymers using nanosecond lasers

The International Journal of Advanced Manufacturing Technology - 2007
M. R. H. Knowles1, G. Rutterford1, D. Karnakis1, A. Ferguson1
1Oxford Lasers Ltd., Didcot, UK

Tóm tắt

Laser micro-processing is an enabling technology that facilitates component miniaturisation and improved performance characteristics. It is being applied across many industries, including semiconductors, electronics, medical, automotive, aerospace, instrumentation and communications. The laser ablation of metals, ceramics and polymers is a complex process and the exact nature of the interaction is specific to the material and laser processing parameters used. Ablation is usually a combination of evaporation and melt expulsion. In order to achieve the highest quality results, it is often desirable to minimise the degree of melting involved and short-pulse lasers show certain advantages in this respect. We discuss the benefits of high laser intensity (GW/cm2) on the target for efficient laser micro-fabrication in metals and ceramics. At such high irradiance conditions, material properties are approaching their critical limits and ablation mechanisms are becoming even more complicated, but this can be exploited to our advantage, in particular, for high-aspect-ratio micro-drilling and micro-cutting. Laser micro-milled 2.5D structures were generated in alumina, tungsten, steel and polyimide. Volume removal rates are presented for the different materials for different laser fluences.

Từ khóa


Tài liệu tham khảo

Oestendorf A, Kamlage G, Klug F, Chickkov BN (2005) Femtosecond versus picosecond laser ablation. In: Proceedings of the SPIE conference, Photon Processing in Microelectronics and Photonic IV, San Jose, California, January 2005, vol 5713, pp 1–8

Karnakis D, Knowles M, Alty K, Schalf M, Snelling H (2005) Comparison of glass processing using high repetition femtosecond (800 nm) and UV (255 nm) nanosecond pulsed lasers. In: Proceedings of the SPIE conference, Microfluidics, BioMEMS and Medical Microsystems III, San Jose, California, January 2005, vol 5718, pp 216–277

Breitling D, Ruf A, Dausinger F (2004) Fundamental aspects in machining of metals with short and ultrashort laser pulses. In: Proceedings of the SPIE conference, Photon Processing in Microelectronics and Photonic III, San Jose, California, January 2004, vol 5339, pp 49–63

Pham DT, Dimov SS, Ji C, Petkov PV, Dobrev T (2004) Laser milling as a ‘rapid’ micromanufacturing process. Proc Inst Mech Eng B J Eng Manuf 218(1):1–7

Fleischer J, Kotschenreuther J (2005) Manufacturing of micro molds by conventional and energy assisted processes. In: Menz W, Dimov S (eds) Proceedings of the 1st International Conference on Multimaterial Micromanufacture (4M 2005), Karlsruhe Germany, June/July 2005, p 9

Ihlemann J, Wolff B, Simon P (1992) Nanosecond and femtosecond excimer laser ablation of fused silica. App Phys A 54(4):363–368

Knowles MRH, Rutterford G, Bell AI, Andrews AJ, Foster-Turner G, Kearsley AJ, Coutts DW, Kapitan D, Webb CE (1998) Sub-micron and high precision micro-machining using nanosecond lasers. Proc ICALEO 85(2):E112–E120

Farlow R, Galbraith W, Knowles M, Hayward G (2001) Micromachining of a piezocomposite transducer using a copper vapor laser. IEEE Trans Ultrason Ferroelectr Freq Control 48(3):639–640

Chang JJ, Warner BE, Dragon EP, Martinez MW (1998) Precision micromachining with pulsed green lasers. J Laser Appl 10(6):285–291

Pham DT, Dimov SS, Petkov PV, Petkov SP (2002) Laser milling. Proc Inst Mech Eng B J Eng Manuf 216(5):657–666

Pettit GH, Sauerbrey R (1993) Pulsed ultraviolet laser ablation. Appl Phys A 56(1):51–63

Thông tin
Thông tin xuất bản

The International Journal of Advanced Manufacturing Technology

Thông tin tác giả