Facile fabrication of intrinsically fire-safety epoxy resin cured with phosphorus-containing transition metal complexes for flame retardation, smoke suppression, and latent curing behavior

Garimella, 2008, Thermal challenges in next-generation electronic systems, IEEE Trans. Compon. Packaging Technol., 31, 801, 10.1109/TCAPT.2008.2001197

Feng, 2018, Synergetic improvement in thermal conductivity and flame retardancy of epoxy/silver nanowires composites by incorporating “branch-like” flame-retardant functionalized graphene, ACS Appl. Mater. Interfaces, 10, 21628, 10.1021/acsami.8b05221

van der Veen, 2012, Phosphorus flame retardants: properties, production, environmental occurrence, toxicity and analysis, Chemosphere, 88, 1119, 10.1016/j.chemosphere.2012.03.067

Velencoso, 2018, Molecular firefighting-how modern phosphorus chemistry can help solve the challenge of flame retardancy, Angew. Chem.-Int. Edit., 57, 10450, 10.1002/anie.201711735

Huo, 2021, Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives, Prog. Polym. Sci., 114, 10.1016/j.progpolymsci.2021.101366

Lu, 2002, Recent developments in the chemistry of halogen-free flame retardant polymers, Prog. Polym. Sci., 27, 1661, 10.1016/S0079-6700(02)00018-7

Shen, 2017, Epoxy resin flame-retarded via a novel melamine-organophosphinic acid salt: Thermal stability, flame retardance and pyrolysis behavior, J. Anal. Appl. Pyrol., 128, 54, 10.1016/j.jaap.2017.10.025

Xu, 2018, A novel and feasible approach for one-pack flame-retardant epoxy resin with long pot life and fast curing, Chem. Eng. J., 337, 30, 10.1016/j.cej.2017.12.086

Xu, 2018, Latent curing epoxy system with excellent thermal stability, flame retardance and dielectric property, Chem. Eng. J., 347, 223, 10.1016/j.cej.2018.04.097

Gann, 1994, Fire conditions for smoke toxicity measurement, Fire Mater., 18, 193, 10.1002/fam.810180306

Xie, 2006, A novel intumescent flame-retardant polyethylene system, Macromol. Mater. Eng., 291, 247, 10.1002/mame.200500356

Zhang, 2016, Few layered Co(OH)2 ultrathin nanosheet-based polyurethane nanocomposites with reduced fire hazard: from eco-friendly flame retardance to sustainable recycling, Green Chem., 18, 3066, 10.1039/C5GC03048J

Song, 2008, Strengthening carbon deposition of polyolefin using combined catalyst as a general method for improving fire retardancy, Macromol. Rapid Commun., 29, 789, 10.1002/marc.200800088

Yu, 2011, Charing polymer wrapped carbon nanotubes for simultaneously improving the flame retardancy and mechanical properties of epoxy resin, Polymer, 52, 4891, 10.1016/j.polymer.2011.08.013

Zhang, 2018, Simultaneously improving the fire safety and mechanical properties of epoxy resin with Fe-CNTs via large-scale preparation, J. Mater. Chem. A, 6, 6376, 10.1039/C7TA10961J

Shao, 2021, A strategy to construct multifunctional ammonium polyphosphate for epoxy resin with simultaneously high fire safety and mechanical properties, Compos. Pt. A-Appl. Sci. Manuf., 149, 10.1016/j.compositesa.2021.106529

Zhang, 2021, A Mo-based metal-organic framework toward improving flame retardancy and smoke suppression of epoxy resin, Polym. Adv. Technol., 32, 3266, 10.1002/pat.5338

He, 2020, Flame retardant polymeric nanocomposites through the combination of nanomaterials and conventional flame retardants, Prog. Mater Sci., 114, 10.1016/j.pmatsci.2020.100687

Kong, 2019, Ultrathin iron phenyl phosphonate nanosheets with appropriate thermal stability for improving fire safety in epoxy, Compos. Sci. Technol., 182, 107748, 10.1016/j.compscitech.2019.107748

Zhu, 2021, Suppressing fire hazard of poly(vinyl alcohol) based on (NH4)2[VO(HPO4)]2(C2O4)·5H2O, J. Appl. Polym. Sci., 138, 10.1002/app.51345

Wagner, 2012, Benign and high-yielding, large-scale synthesis of diphenylphosphinodithioic acid and related compounds, Org. Process Res. Dev., 17, 47, 10.1021/op300147f

Naumann, 2014, Latent and delayed action polymerization systems, Macromol. Rapid Commun., 35, 682, 10.1002/marc.201300898

Winter, 1986, Analysis of linear viscoelasticity of a crosslinking polymer at the gel point, J. Rheol., 30, 367, 10.1122/1.549853

Lin, 2001, Novel phosphorus-containing epoxy resins Part I. Synthesis and properties, Polymer, 42, 1869, 10.1016/S0032-3861(00)00447-X

McAninch, 2015, DMA testing of epoxy resins: The importance of dimensions, Polym. Eng. Sci., 55, 2761, 10.1002/pen.24167

Hill, 1997, Calculation of crosslink density in short chain networks, Prog. Org. Coat., 31, 235, 10.1016/S0300-9440(97)00081-7

Ling, 2010, New composites with high thermal conductivity and low dielectric constant for microelectronic packaging, Polym. Compos., 31, 307, 10.1002/pc.20805

Vo, 2002, Towards model-based engineering of optoelectronic packaging materials: dielectric constant modeling, Microelectron. J., 33, 409, 10.1016/S0026-2692(02)00010-1

Wang, 2020, Dielectric strength of glass fibre fabric reinforced epoxy by nano-Al2O3, IEEE Trans. Dielectr. Electr. Insul., 27, 1086, 10.1109/TDEI.2020.008621

Cao, 2015, Fabrication and origin of new flame retarding bismaleimide resin system with low dielectric constant and loss based on microencapsulated hexaphenoxycyclotriphosphazene in low phosphorus content, Polym. Degrad. Stabil., 121, 157, 10.1016/j.polymdegradstab.2015.09.004

Beach, 2008, Studies of degradation enhancement of polystyrene by flame retardant additives, Polym. Degrad. Stabil., 93, 1664, 10.1016/j.polymdegradstab.2008.06.010

Schartel, 2007, Development of fire-retarded materials-Interpretation of cone calorimeter data, Fire Mater., 31, 327, 10.1002/fam.949

Tan, 2015, Novel multifunctional organic-inorganic hybrid curing agent with high flame-retardant efficiency for epoxy resin, ACS Appl. Mater. Interfaces, 7, 17919, 10.1021/acsami.5b04570

Vasseur, 2010, 361

Chen, 2014, Smoke suppression properties of ferrite yellow on flame retardant thermoplastic polyurethane based on ammonium polyphosphate, J. Hazard. Mater., 266, 114, 10.1016/j.jhazmat.2013.12.025

Gann, 2011, Hazards of combustion products: Toxicity, opacity, corrosivity, and heat release: The experts' views on capability and issues, Fire Mater., 35, 115, 10.1002/fam.1043

Huang, 2021, Synthesis of a bio-based piperazine phytate flame retardant for epoxy resin with improved flame retardancy and smoke suppression, Polym. Adv. Technol., 32, 4282, 10.1002/pat.5429

Sui, 2021, Superior radical scavenging and catalytic carbonization capacities of bioderived assembly modified ammonium polyphosphate as a mono-component intumescent flame retardant for epoxy resin, Eur. Polym. J., 156, 110601, 10.1016/j.eurpolymj.2021.110601

Kong, 2018, Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through layered copper phenylphosphate, Compos. Sci. Technol., 154, 136, 10.1016/j.compscitech.2017.10.013

Xu, 2018, The flame retardancy and smoke suppression effect of a hybrid containing CuMoO4 modified reduced graphene oxide/layered double hydroxide on epoxy resin, J. Hazard. Mater., 343, 364, 10.1016/j.jhazmat.2017.09.057

Huo, 2022, Flame-retardant, transparent, mechanically-strong and tough epoxy resin enabled by high-efficiency multifunctional boron-based polyphosphonamide, Chem. Eng. J., 427, 10.1016/j.cej.2021.131578

Sadezky, 2005, Raman microspectroscopy of soot and related carbonaceous materials: Spectral analysis and structural information, Carbon, 43, 1731, 10.1016/j.carbon.2005.02.018

Schwan, 1996, Raman spectroscopy on amorphous carbon films, J. Appl. Phys., 80, 440, 10.1063/1.362745

Fu, 2020, Fire hazards management for polymeric materials via synergy effects of pyrolysates-fixation and aromatized-charring, J. Hazard. Mater., 389, 10.1016/j.jhazmat.2020.122040

Thomson, 2018, A radical approach to soot formation, Science, 361, 978, 10.1126/science.aau5941

Song, 2007, The combined catalytic action of solid acids with nickel for the transformation of polypropylene into carbon nanotubes by pyrolysis, Chem.-Eur. J., 13, 3234, 10.1002/chem.200601018