Surface integrity in metal machining - Part II: Functional performance

Liao, 2021, Surface integrity in metal machining - Part I: fundamentals of surface characteristics and formation mechanisms, Int. J. Mach. Tool Manufact., 162, 103687, 10.1016/j.ijmachtools.2020.103687

El-Sayed, 2017

Hovorun, 2017

Rad Hr, 2012, Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys, Mater. Des., 33, 88, 10.1016/j.matdes.2011.06.057

Liao, 2020, Novel cutting inserts with multi-channel irrigation at the chip-tool interface: modelling, design and experiments, CIRP Ann, 7

la Monaca, 2020, A digital approach to automatically assess the machining-induced microstructural surface integrity, J. Mater. Process. Technol., 282, 116703, 10.1016/j.jmatprotec.2020.116703

Cha, 2019, Geometrical modelling of pulsed laser ablation of high performance metallic alloys, Int. J. Mach. Tool Manufact., 141, 78, 10.1016/j.ijmachtools.2019.04.004

Schijve, 2003, Fatigue of structures and materials in the 20th century and the state of the art, Int. J. Fatig., 25, 679, 10.1016/S0142-1123(03)00051-3

Rankine, 1843, On the causes of the unexpected breakage of the journals of railway axles; and on the mean of preventing such accidents by observing the law of continuity in their construction, J. Franklin Inst., 36, 178, 10.1016/S0016-0032(43)91062-2

Ewing, 1903, The fracture of metals under repeated alternations of stress, Philos. Trans. R. Soc. Lond. - Ser. A Contain. Pap. a Math. or Phys. Character, 200, 241

Griffith, 1921, The phenomena of rupture and flow in solids, Philos. Trans. R. Soc. Lond. - Ser. A Contain. Pap. a Math. or Phys. Character, 221, 163

Paris, 1963, A critical analysis of crack propagation laws, J. Basic Eng., 85, 528, 10.1115/1.3656900

Withey, 1997, Fatigue failure of the de Havilland comet I, Eng. Fail. Anal., 4, 147, 10.1016/S1350-6307(97)00005-8

Hardy, 2014, Characterising the integrity of machined surfaces in a powder nickel alloy used in aircraft engines, Procedia CIRP, 13, 411, 10.1016/j.procir.2014.04.070

Ghosh, 2010, Microstructural changes in AISI 304L stainless steel due to surface machining: effect on its susceptibility to chloride stress corrosion cracking, J. Nucl. Mater., 403, 62, 10.1016/j.jnucmat.2010.05.028

Guan, 2019, Life time extension of turbine rotating components under risk constraints: a state-of-the-art review and case study, Int. J. Fatig., 129, 104799, 10.1016/j.ijfatigue.2018.08.003

Makino, 2020, Overview of fatigue damage evaluation rule for railway axles in Japan and fatigue property of railway axle made of medium carbon steel, Int. J. Fatig., 132, 105361, 10.1016/j.ijfatigue.2019.105361

Novovic, 2004, The effect of machined topography and integrity on fatigue life, Int. J. Mach. Tool Manufact., 10.1016/j.ijmachtools.2003.10.018

Arola, 2002, Estimating the fatigue stress concentration factor of machined surfaces, Int. J. Fatig., 24, 923, 10.1016/S0142-1123(02)00012-9

Hashimoto, 2006, Surface integrity difference between hard turned and ground surfaces and its impact on fatigue life, CIRP Ann. - Manuf. Technol., 55, 81, 10.1016/S0007-8506(07)60371-0

Matsumoto, 1991, Effect of machining processes on the fatigue strength of hardened AISI 4340 steel, J. Manuf. Sci. Eng. Trans. ASME., 113, 154, 10.1115/1.2899672

Thakur, 2016, State-of-the-art in surface integrity in machining of nickel-based super alloys, Int. J. Mach. Tool Manufact., 100, 25, 10.1016/j.ijmachtools.2015.10.001

Sasahara, 2005, The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steel, Int. J. Mach. Tool Manufact., 45, 131, 10.1016/j.ijmachtools.2004.08.002

Choi, 2009, A study on the effects of machining-induced residual stress on rolling contact fatigue, Int. J. Fatig., 31, 1517, 10.1016/j.ijfatigue.2009.05.001

Choi, 2010, Influence of tool flank wear on performance of finish hard machined surfaces in rolling contact, Int. J. Fatig., 32, 390, 10.1016/j.ijfatigue.2009.07.014

Jawahir, 2011, Surface integrity in material removal processes: recent advances, CIRP Ann. - Manuf. Technol., 60, 603, 10.1016/j.cirp.2011.05.002

Liao, 2019, Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case, Acta Mater., 180, 2, 10.1016/j.actamat.2019.08.059

Wusatowska-Sarnek, 2011, Microstructural characterization of the white etching layer in nickel-based superalloy, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 42, 3813, 10.1007/s11661-011-0779-8

Herbert, 2014, Influence of surface anomalies following hole making operations on the fatigue performance for a nickel-based superalloy, J. Manuf. Sci. Eng. Trans. ASME., 136, 1, 10.1115/1.4027619

Hardy, 2020, Solving recent challenges for wrought Ni-base superalloys, Metall. Mater. Trans., 10.1007/s11661-020-05773-6

M'Saoubi, 2015, High performance cutting of advanced aerospace alloys and composite materials, CIRP Ann. - Manuf. Technol., 64, 557, 10.1016/j.cirp.2015.05.002

Connolley, 2004, Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 35, 771, 10.1007/s11661-004-0005-z

Hardy, 2004, Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications, 83

M'Saoubi, 2014, Surface integrity of nickel-based alloys subjected to severe plastic deformation by abusive drilling, CIRP Ann. - Manuf. Technol., 63, 61, 10.1016/j.cirp.2014.03.067

Soo, 2011, Machinability and surface integrity of RR1000 nickel based superalloy, CIRP Ann. - Manuf. Technol., 60, 89, 10.1016/j.cirp.2011.03.094

Herbert, 2012, An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy, J. Mater. Process. Technol., 212, 1723, 10.1016/j.jmatprotec.2012.03.014

Xu, 2020, Investigation of surface integrity in laser-assisted machining of nickel based superalloy, Mater. Des., 108851, 10.1016/j.matdes.2020.108851

Shang, 2019, On modelling of laser assisted machining: forward and inverse problems for heat placement control, Int. J. Mach. Tool Manufact., 10.1016/j.ijmachtools.2018.12.001

Niknam, 2014, Machinability and machining of titanium alloys: a review, 1

Crawforth, 2012, Subsurface deformation during precision turning of a near-alpha titanium alloy, Scripta Mater., 67, 842, 10.1016/j.scriptamat.2012.08.001

Wang, 2016, Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining, Mater. Sci. Eng., 675, 271, 10.1016/j.msea.2016.08.076

Che-Haron, 2005, The effect of machining on surface integrity of titanium alloy Ti-6% Al-4% v, J. Mater. Process. Technol., 166, 188, 10.1016/j.jmatprotec.2004.08.012

Cox, 2019, The effect of machining and induced surface deformation on the fatigue performance of a high strength metastable β titanium alloy, Int. J. Fatig., 124, 26, 10.1016/j.ijfatigue.2019.02.033

Kothari, 2012, Advances in gamma titanium aluminides and their manufacturing techniques, Prog. Aero. Sci., 55, 1, 10.1016/j.paerosci.2012.04.001

Mantle, 1997, Surface integrity and fatigue life of turned gamma titanium aluminide, J. Mater. Process. Technol., 72, 413, 10.1016/S0924-0136(97)00204-5

Dickinson, 1970

Javidi, 2008, The effect of machining on the surface integrity and fatigue life, Int. J. Fatig., 30, 2050, 10.1016/j.ijfatigue.2008.01.005

Smith, 2007, Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance, Mater. Sci. Eng., 459, 337, 10.1016/j.msea.2007.01.011

Ajaja, 2019, High cycle fatigue behavior of hard turned 300 M ultra-high strength steel, Int. J. Fatig., 131, 105380, 10.1016/j.ijfatigue.2019.105380

Rasti, 2019, An investigation into the effect of surface integrity on the fatigue failure of AISI 4340 steel in different drilling strategies, Eng. Fail. Anal., 95, 66, 10.1016/j.engfailanal.2018.08.022

Hasunuma, 2019, Fatigue life prediction of carbon steel with machined surface layer under low-cycle fatigue, Int. J. Fatig., 123, 255, 10.1016/j.ijfatigue.2019.02.017

Choi, 2017, Influence of rake angle on surface integrity and fatigue performance of machined surfaces, Int. J. Fatig., 94, 81, 10.1016/j.ijfatigue.2016.09.013

Zhang, 2018, Recent advances in the development of aerospace materials, Prog. Aero. Sci., 97, 22, 10.1016/j.paerosci.2018.01.001

Suraratchai, 2008, Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy, Int. J. Fatig., 30, 2119, 10.1016/j.ijfatigue.2008.06.003

Abroug, 2018, A probabilistic approach to study the effect of machined surface states on HCF behavior of a AA7050 alloy, Int. J. Fatig., 116, 473, 10.1016/j.ijfatigue.2018.06.048

Rotella, 2019, Effect of surface integrity induced by machining on high cycle fatigue life of 7075-T6 aluminum alloy, J. Manuf. Process., 41, 83, 10.1016/j.jmapro.2019.03.031

Ho, 2003, State of the art electrical discharge machining (EDM), Int. J. Mach. Tool Manufact., 43, 1287, 10.1016/S0890-6955(03)00162-7

Ulutan, 2011, Machining induced surface integrity in titanium and nickel alloys: a review, Int. J. Mach. Tool Manufact., 51, 250, 10.1016/j.ijmachtools.2010.11.003

Newton, 2009, Investigation of the effect of process parameters on the formation and characteristics of recast layer in wire-EDM of Inconel 718, Mater. Sci. Eng., 513

Liu, 2016, Crystallography, compositions, and properties of white layer by wire electrical discharge machining of nitinol shape memory alloy, Mater. Des.

Anthony Xavior, 2019, Fatigue life and fracture morphology of Inconel 718 machined by spark EDM process, Procedia Manuf, 30, 292, 10.1016/j.promfg.2019.02.042

Antar, 2012, Fatigue response of Udimet 720 following minimum damage wire electrical discharge machining, Mater. Des., 42, 295, 10.1016/j.matdes.2012.06.003

Ayesta, 2016, Influence of the WEDM process on the fatigue behavior of Inconel® 718, Int. J. Fatig., 92, 220, 10.1016/j.ijfatigue.2016.07.011

Pramanik, 2019, Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy, Int. J. Fatig., 128, 105186, 10.1016/j.ijfatigue.2019.105186

Mower, 2014, Degradation of titanium 6Al-4V fatigue strength due to electrical discharge machining, Int. J. Fatig., 64, 84, 10.1016/j.ijfatigue.2014.02.018

Tai, 2009, Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks, Int. J. Fatig., 31, 433, 10.1016/j.ijfatigue.2008.07.013

Zeid, 1997, On the effect of electrodischarge machining parameters on the fatigue life of AISI D6 tool steel, J. Mater. Process. Technol., 68, 27, 10.1016/S0924-0136(96)02523-X

Thomas, 2016, Optimising laser cut-edge durability for steel structures in high stress applications, J. Constr. Steel Res., 121, 40, 10.1016/j.jcsr.2016.01.013

Pessoa, 2017, Influence of surface condition due to laser beam cutting on the fatigue behavior of metastable austenitic stainless steel AISI 304, Eng. Fract. Mech., 185, 227, 10.1016/j.engfracmech.2017.05.040

Reck, 2019, Fatigue behavior of non-optimized laser-cut medical grade Ti-6Al-4V-ELI sheets and the effects of mechanical post-processing, Metals, 9, 843, 10.3390/met9080843

Cha, 2020, Development of a novel system for in-situ repair of aeroengine airfoil via pulsed laser ablation, J. Manuf. Syst., 55, 126, 10.1016/j.jmsy.2020.03.001

Saxena, 2018, A review on process capabilities of electrochemical micromachining and its hybrid variants, Int. J. Mach. Tool Manufact., 127, 28, 10.1016/j.ijmachtools.2018.01.004

Paczkowski, 2017, Monitoring and control of the electrochemical machining process under the conditions of a vibrating tool electrode, J. Mater. Process. Technol., 244, 204, 10.1016/j.jmatprotec.2017.01.023

Clifton, 2001, Electrochemical machining of gamma titanium aluminide intermetallics, J. Mater. Process. Technol., 108, 338, 10.1016/S0924-0136(00)00739-1

Klocke, 2014, Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes, CIRP Ann. - Manuf. Technol., 63, 703, 10.1016/j.cirp.2014.05.004

Spear, 2013, Effect of chemical milling on low-cycle fatigue behavior of an Al-Mg-Si alloy, Corrosion Sci., 68, 144, 10.1016/j.corsci.2012.11.006

Sefer, 2016, Chemical milling effect on the low cycle fatigue properties of cast Ti–6Al–2Sn–4Zr–2Mo alloy, Int. J. Fatig., 92, 193, 10.1016/j.ijfatigue.2016.07.003

Sharman, 2001, The effects of machined workpiece surface integrity on the fatigue life of γ-titanium aluminide, Int. J. Mach. Tool Manufact., 41, 1681, 10.1016/S0890-6955(01)00034-7

Hosseini, 2015, Formation mechanisms of white layers induced by hard turning of AISI 52100 steel, Acta Mater., 89, 258, 10.1016/j.actamat.2015.01.075

Sadek, 2016, The probability of HCF – Surface and sub-surface models, Int. J. Fatigue, 10.1016/j.ijfatigue.2016.06.021

Staley, 2017, Corrosion of aluminum aerospace alloys, Mater. Sci. Forum, 877, 485, 10.4028/www.scientific.net/MSF.877.485

Sueishi, 2006, Microstructure and nano-hardness analyses of stress corrosion cracking, utilizing 316L core shroud of BWR power reactors, Fusion Eng. Des., 81, 1099, 10.1016/j.fusengdes.2005.09.065

Mansoori, 2017, Pitting corrosion failure analysis of a wet gas pipeline, Eng. Fail. Anal., 82, 16, 10.1016/j.engfailanal.2017.08.012

Hsieh, 2010, Effect of tolyltriazole on the corrosion protection of copper against ammonia and disinfectants in cooling systems, Ind. Eng. Chem. Res., 49, 7313, 10.1021/ie100384d

More, 2011, Tribocorrosion behavior of β titanium alloys in physiological solutions containing synovial components, Mater. Sci. Eng. C, 31, 400, 10.1016/j.msec.2010.10.021

Wang, 2009, Sol-gel coatings on metals for corrosion protection, Prog. Org. Coating, 64, 327, 10.1016/j.porgcoat.2008.08.010

Liu, 2017, The corrosion behaviour of machined AA7150-T651 aluminium alloy, Corrosion Sci., 126, 265, 10.1016/j.corsci.2017.07.008

Wan, 2014, Stress influence on corrosion resistance of aluminum alloy surface, Adv. Mater. Res., 1017, 287, 10.4028/www.scientific.net/AMR.1017.287

Liu, 2018, Effect of surface abrasion on pitting corrosion of Al-Li alloy, Corrosion Sci., 138, 75, 10.1016/j.corsci.2018.04.010

Grilli, 2010, Localized corrosion of a 2219 aluminium alloy exposed to a 3.5% NaCl solution, Corrosion Sci., 52, 2855, 10.1016/j.corsci.2010.04.035

Ralston, 2010, Effect of grain size on corrosion: a review, Corrosion, 66, 750051, 10.5006/1.3462912

Deng, 2013, Ultrafine-grained copper produced by machining and its unusual electrochemical corrosion resistance in acidic chloride pickling solutions, Corrosion Sci., 74, 44, 10.1016/j.corsci.2013.04.007

Ralston, 2011, Effect of grain size on corrosion of high purity aluminium, Electrochim. Acta, 56, 1729, 10.1016/j.electacta.2010.09.023

Pu, 2010, Microstructural changes of AZ31 magnesium alloys induced by cryogenic machining and its influence on corrosion resistance in simulated body fluid for biomedical applications, ASME 2010 Int. Manuf. Sci. Eng. Conf. MSEC, 1, 271, 10.1115/MSEC2010-34234

Pu, 2011, Controlling the biodegradation rate of magnesium-based implants through surface nanocrystallization induced by cryogenic machining implants through surface nanocrystallization induced by cryogenic machining, Magnes. Technol., 635

Pu, 2011, Surface integrity in dry and cryogenic machining of AZ31B Mg alloy with varying cutting edge radius tools, Procedia Eng, 19, 282, 10.1016/j.proeng.2011.11.113

Vignal, 2014, Mechanical properties and corrosion behaviour of low carbon martensitic stainless steel after machining, Int. J. Mach. Mach. Mater., 15, 36

Elhoud, 2011, The effect of manufacturing variables on the corrosion resistance of a super duplex stainless steel, Int. J. Adv. Manuf. Technol., 52, 451, 10.1007/s00170-010-2756-6

Wang, 2017, Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water, Corrosion Sci., 126, 104, 10.1016/j.corsci.2017.06.019

Terachi, 2008, Corrosion behavior of stainless steels in simulated PWR primary water—effect of chromium content in alloys and dissolved hydrogen—, J. Nucl. Sci. Technol., 45, 975, 10.1080/18811248.2008.9711883

Harrison, 2007, Inspection of white layer in hard turned components using electrochemical methods, J. Manuf. Sci. Eng. Trans. ASME., 129, 447, 10.1115/1.2540655

Turnbull, 2011, Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure, Corrosion Sci., 53, 3398, 10.1016/j.corsci.2011.06.020

Zhang, 2016, Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel, Corrosion Sci., 108, 173, 10.1016/j.corsci.2016.03.008

Rajaguru, 2018, Investigation on machining induced surface and subsurface modifications on the stress corrosion crack growth behaviour of super duplex stainless steel, Corrosion Sci., 141, 230, 10.1016/j.corsci.2018.07.012

Ghosh, 2010, Effect of surface machining and cold working on the ambient temperature chloride stress corrosion cracking susceptibility of AISI 304L stainless steel, Mater. Sci. Eng., 527, 679, 10.1016/j.msea.2009.08.039

Ghosh, 2011, Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel, Mater. Des., 32, 3823, 10.1016/j.matdes.2011.03.012

Chang, 2019, Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water, Acta Mater., 165, 203, 10.1016/j.actamat.2018.11.046

Chang, 2018, Stress corrosion crack initiation in machined type 316L austenitic stainless steel in simulated pressurized water reactor primary water, Corrosion Sci., 138, 54, 10.1016/j.corsci.2018.04.003

Dubey, 2008, Laser beam machining-A review, Int. J. Mach. Tool Manufact., 48, 609, 10.1016/j.ijmachtools.2007.10.017

Bleys, 2006, Surface and sub-surface quality of steel after EDM, Adv. Eng. Mater., 8, 15, 10.1002/adem.200500211

Cusanelli, 2004, Microstructure at submicron scale of the white layer produced by EDM technique, J. Mater. Process. Technol., 149, 289, 10.1016/j.jmatprotec.2003.11.047

Soltis, 2015, Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review, Corrosion Sci., 90, 5, 10.1016/j.corsci.2014.10.006

Arunachalam, 2018, Effect of electrical discharge machining on corrosion and corrosion fatigue behavior of aluminum alloys, Int. J. Fatig., 111, 44, 10.1016/j.ijfatigue.2018.02.005

Obara, 2004, Fundamental study on corrosion of cemented carbide during wire EDM, J. Mater. Process. Technol., 149, 370, 10.1016/j.jmatprotec.2003.10.045

Wang, 2009, Recast layer removal after electrical discharge machining via Taguchi analysis: a feasibility study, J. Mater. Process. Technol., 209, 4134, 10.1016/j.jmatprotec.2008.10.012

Hertweck, 2018, Electro discharge machining - a suitable fabrication process for high-pressure/high-temperature equipment, Chem. Eng. Technol., 41, 994, 10.1002/ceat.201700680

Sato, 2008, Simulation of stress corrosion cracking behavior in a tube-shaped specimen of nickel-based alloy 600, Nucl. Eng. Des., 238, 1, 10.1016/j.nucengdes.2007.06.009

Bai, 2007, Effects of electrical discharge surface modification of superalloy Haynes 230 with aluminum and molybdenum on oxidation behavior, Corrosion Sci., 49, 3889, 10.1016/j.corsci.2007.05.009

Wen, 2016, Analysis of surface quality of multi-film cooling holes in nickel-based single crystal superalloy, Mater. Sci. Technol., 32, 1845, 10.1080/02670836.2016.1149277

Li, 2019, Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy, J. Alloys Compd., 783, 95, 10.1016/j.jallcom.2018.12.283

Kang, 2005, Effect of electrical discharge machining process on crack susceptibility of nickel based heat resistant alloy, Mater. Sci. Technol., 21, 817, 10.1179/174328405X36601

Mandal, 2017, Improvement of surface integrity of Nimonic C 263 super alloy produced by WEDM through various post-processing techniques, Int. J. Adv. Manuf. Technol., 93, 433, 10.1007/s00170-017-9993-x

Eliaz, 2002, Hot corrosion in gas turbine components, Eng. Fail. Anal., 9, 31, 10.1016/S1350-6307(00)00035-2

Ntasi, 2010, The effect of Electro Discharge Machining (EDM) on the corrosion resistance of dental alloys, Dent. Mater., 26, 237, 10.1016/j.dental.2010.08.001

Zinelis, 2014, Multitechnique characterization of CPTi surfaces after electro discharge machining (EDM), Clin. Oral Invest., 18, 67, 10.1007/s00784-013-0962-y

Prakash, 2017, Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity, Surf. Coating. Technol., 326, 134, 10.1016/j.surfcoat.2017.07.040

Jabbaripour, 2013, Investigating surface roughness, material removal rate and corrosion resistance in PMEDM of γ-TiAl intermetallic, J. Manuf. Process., 15, 56, 10.1016/j.jmapro.2012.09.016

Uno, 2005, High-efficiency finishing process for metal mold by large-area electron beam irradiation, Precis. Eng., 29, 449, 10.1016/j.precisioneng.2004.12.005

Sidhom, 2013, Effect of electro discharge machining (EDM) on the AISI316L SS white layer microstructure and corrosion resistance, Int. J. Adv. Manuf. Technol., 65, 141, 10.1007/s00170-012-4156-6

Bhattacharya, 2018, Corrosion behavior of wire electrical discharge machined surfaces of P91 steel, J. Mater. Eng. Perform., 27, 4561, 10.1007/s11665-018-3558-5

Pujari, 2018, Surface integrity of wire EDMed aluminum alloy: a comprehensive experimental investigation, J. King Saud Univ. - Eng. Sci., 30, 368

Stambekova, 2012, Microstructural and corrosion characteristics of alloying modified layer on 5083 Al alloy by electrical discharge alloying process with pure silicon electrode, Mater. Trans., 53, 1436, 10.2320/matertrans.M2012131

Feng, 2005, Femtosecond laser micromachining of a single-crystal superalloy, Scripta Mater., 53, 511, 10.1016/j.scriptamat.2005.05.006

Dubey, 2008, Laser beam machining—a review, Int. J. Mach. Tool Manufact., 48, 609, 10.1016/j.ijmachtools.2007.10.017

Rao, 2005, Inert gas cutting of titanium sheet with pulsed mode CO2 laser, Optic Laser. Eng., 43, 1330, 10.1016/j.optlaseng.2004.12.009

Morar, 2017, The effect of trepanning speed of laser drilled acute angled cooling holes on the high temperature low cycle corrosion fatigue performance of CMSX-4 at 850 °C, Int. J. Fatig., 102, 112, 10.1016/j.ijfatigue.2017.04.017

Vidyasagar, 2020, Optimization of laser parameters for improved corrosion resistance of nitinol, Mater. Manuf. Process., 1

Man, 2001, Corrosion properties of laser surface melted NiTi shape memory alloy, Scripta Mater., 45, 1447, 10.1016/S1359-6462(01)01182-4

Michael, 2017, Corrosion performance of medical grade NiTi after laser processing, Surf. Coating. Technol., 324, 478, 10.1016/j.surfcoat.2017.05.092

Shanjin, 2006, An investigation of pulsed laser cutting of titanium alloy sheet, Optic Laser. Eng., 44, 1067, 10.1016/j.optlaseng.2005.09.003

Sun, 2003, Effect of laser surface remelting on the corrosion behavior of commercially pure titanium sheet, Mater. Sci. Eng., 345, 293, 10.1016/S0921-5093(02)00477-X

Gil, 2012, Corrosion and corrosion-fatigue behavior of cp-Ti and Ti–6Al–4V laser-marked biomaterials, J. Mater. Sci. Mater. Med., 23, 885, 10.1007/s10856-012-4572-z

Yue, 2004, Excimer laser surface treatment of aluminum alloy AA7075 to improve corrosion resistance, Surf. Coating. Technol., 179, 158, 10.1016/S0257-8972(03)00850-8

Xu, 2008, Nd:YAG laser surface melting of aluminium alloy 6013 for improving pitting corrosion fatigue resistance, J. Mater. Sci., 43, 942, 10.1007/s10853-007-2208-3

Valette, 2006, Influence of femtosecond laser marking on the corrosion resistance of stainless steels, Appl. Surf. Sci., 252, 4696, 10.1016/j.apsusc.2005.07.161

Pieretti, 2014, Localized corrosion evaluation of the ASTM F139 stainless steel marked by laser using scanning vibrating electrode technique, X-ray photoelectron spectroscopy and Mott–Schottky techniques, Electrochim. Acta, 124, 150, 10.1016/j.electacta.2013.10.137

Švantner, 2016, Thermal effects of laser marking on microstructure and corrosion properties of stainless steel, Appl. Optic., 55, D35, 10.1364/AO.55.000D35

Wang, 2004, EPMA microanalysis of recast layers produced during laser drilling of type 305 stainless steel, Thin Solid Films, 453, 84, 10.1016/j.tsf.2003.11.158

Eto, 2014, Effect of residual stress induced by pulsed-laser irradiation on initiation of chloride stress corrosion cracking in stainless steel, Mater. Sci. Eng., 590, 433, 10.1016/j.msea.2013.10.066

Gupta, 2016, Comparison of stress corrosion cracking susceptibility of laser machined and milled 304 L stainless steel, Lasers Manuf. Mater. Process., 3, 191, 10.1007/s40516-016-0030-y

Krawczyk, 2018, Atmospheric chloride-induced stress corrosion cracking of laser engraved type 316L stainless steel, Corrosion Sci., 142, 93, 10.1016/j.corsci.2018.07.016

Klocke, 2018, Surface integrity in electrochemical machining processes: an analysis on material modifications occurring during electrochemical machining, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 232, 578, 10.1177/0954405417703422

Cai, 2020, A review of fretting study on nuclear power equipment, Tribol. Int., 144, 106095, 10.1016/j.triboint.2019.106095

Liu, 2017, Effect of anodic behavior on electrochemical machining of TB6 titanium alloy, Electrochim. Acta, 233, 190, 10.1016/j.electacta.2017.03.025

Song, 2012, Electrochemical machining of super-hydrophobic Al surfaces and effect of processing parameters on wettability, Appl. Phys. A, 108, 559, 10.1007/s00339-012-6927-1

Chen, 2019, Characterizing the effects of in-situ sensitization on stress corrosion cracking of austenitic steels in supercritical water, Scripta Mater., 158, 66, 10.1016/j.scriptamat.2018.08.041

Ralston, 2010, Revealing the relationship between grain size and corrosion rate of metals, Scripta Mater., 63, 1201, 10.1016/j.scriptamat.2010.08.035

Holmberg, 2017, Influence of tribology on global energy consumption, costs and emissions, Friction, 5, 263, 10.1007/s40544-017-0183-5

Gale, 2004

Laguna-Camacho, 2012, Solid particle erosion on coatings employed to protect die casting molds, Prog. Org. Coating, 74, 750, 10.1016/j.porgcoat.2011.09.022

Hutchings, 1992

Kato, 2000, Wear mechanisms, 273

Khruschov, 1957, Resistance of metal to wear by abrasion as related to hardness, 655

Gale, 2004

Jiménez, 2011, 2 - friction and wear, 33

Guo, 2010, An experimental study on the effect of machining-induced white layer on frictional and wear performance at dry and lubricated sliding contact, Tribol. Trans., 53, 127, 10.1080/10402000903283250

Kato, 2018, Wear resistance improvement by nanostructured surface layer produced by burnishing, 231

Griffiths, 1987, Tribological advantages of white layers produced by machining, J. Tribol., 109, 338, 10.1115/1.3261363

Yang, 1996

Bartha, 2005, Wear of hard-turned AISI 52100 steel, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 36, 1417, 10.1007/s11661-005-0234-9

Jalalahmadi, 2009

Choi, 2010, Influence of a white layer on the performance of hard machined surfaces in rolling contact, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 224, 1207, 10.1243/09544054JEM1847

Ekmekci, 2007, Residual stresses and white layer in electric discharge machining (EDM), Appl. Surf. Sci., 253, 9234, 10.1016/j.apsusc.2007.05.078

B. Lauwers, J.-P. Kruth, W. Eeraerts, Wear Behaviour and Tool Life of Wire-EDM-Ed and Ground Carbide Punches, n.d.

Srinivasan, 2020, Surface integrity, fatigue performance and dry sliding wear behaviour of Si3N4–TiN after wire-electro discharge machining, Ceram. Int., 1

K. Bonny, Y. Perez, J. Van Wittenberghe, P. De Baets, J. Vleugels, B. Lauwers, Effect of Surface Finishing on Tribological Properties of ZrO 2-based Composites, n.d.

Perez Delgado, 2011, Impact of wire-EDM on dry sliding friction and wear of WC-based and ZrO2-based composites, Wear, 271, 1951, 10.1016/j.wear.2010.12.068

Furze, 1988, Engineering the surface characteristics of wear resistant white layers with reference to the design of tribosystems, J. FUELS Lubr., 97, 746

Champaigne, 2006, History of shot peening specifications, Shot Peen, 20, 12

Hearn, 1997, Contact stress, residual stress and stress concentrations, vol. 2, 381

Zupanc, 2010, Effect of pitting corrosion on fatigue performance of shot-peened aluminium alloy 7075-T651, J. Mater. Process. Technol., 210, 1197, 10.1016/j.jmatprotec.2010.03.004

Mahagaonkar, 2009, Effect on fatigue performance of shot peened components: an analysis using DOE technique, Int. J. Fatig., 31, 693, 10.1016/j.ijfatigue.2008.03.020

Montross, 2002, Laser shock processing and its effects on microstructure and properties of metal alloys: a review, Int. J. Fatig., 24, 1021, 10.1016/S0142-1123(02)00022-1

Srivastava, 2016, Potential of using water jet peening as a surface treatment process for welded joints, Procedia Eng, 149, 472, 10.1016/j.proeng.2016.06.694

Child, 2011, Assessment of surface hardening effects from shot peening on a Ni-based alloy using electron backscatter diffraction techniques, Acta Mater., 10.1016/j.actamat.2011.04.025

Messé, 2014, Characterization of plastic deformation induced by shot- peening in a Ni-base superalloy, JOM, 10.1007/s11837-014-1184-8

Gibson, 2016, Influence of shot peening on high-temperature corrosion and corrosion-fatigue of nickel based superalloy 720Li, Mater. High Temp., 10.1080/09603409.2016.1161945

Kim, 2005, Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue, Metall. Mater. Trans. A, 10.1007/s11661-005-0076-5

Tufft, 1999, Shot Peen Impact on Life, Part 1: Designed Experiment Using Rene 88DT, ICSP 7 7 Th Int. Conf. Shot Peen., 244

Jackson, 2020, The Effect of shot peening on the ductility and tensile strength of nickel-based superalloy alloy 720Li

Chen, 2017, Effect of cooling and shot peening on residual stresses and fatigue performance of milled Inconel 718, Residual Stress, 2, 13, 10.21741/9781945291173-3

Gao, 2011, Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening, Mater. Sci. Eng., 528, 3823, 10.1016/j.msea.2011.01.077

Xu, 2018, The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes, Int. J. Fatig., 111, 196, 10.1016/j.ijfatigue.2018.02.022

Lu, 2010, Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel, Acta Mater., 58, 5354, 10.1016/j.actamat.2010.06.010

Gill, 2012, High spatial resolution, high energy synchrotron x-ray diffraction characterization of residual strains and stresses in laser shock peened Inconel 718SPF alloy, J. Appl. Phys., 111

Cuellar, 2012, Residual stress and fatigue life in laser shock peened open hole samples, Int. J. Fatig., 44, 8, 10.1016/j.ijfatigue.2012.06.011

Ren, 2014, A finite element analysis of thermal relaxation of residual stress in laser shock processing Ni-based alloy GH4169, Mater. Des., 54, 708, 10.1016/j.matdes.2013.08.054

Ren, 2013, The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole, Mater. Des., 44, 149, 10.1016/j.matdes.2012.07.024

Pavan, 2019, Fatigue crack growth in a laser shock peened residual stress field, Int. J. Fatig., 123, 157, 10.1016/j.ijfatigue.2019.01.020

Soyama, 2019, Comparison between the improvements made to the fatigue strength of stainless steel by cavitation peening, water jet peening, shot peening and laser peening, J. Mater. Process. Technol., 269, 65, 10.1016/j.jmatprotec.2019.01.030

Liao, 2020, Dual-processing by abrasive waterjet machining–A method for machining and surface modification of nickel-based superalloy, J. Mater. Process. Technol., 116768, 10.1016/j.jmatprotec.2020.116768

Holmberg, 2018, Surface integrity after post processing of EDM processed Inconel 718 shaft, Int. J. Adv. Manuf. Technol., 95, 2325, 10.1007/s00170-017-1342-6

Arola, 2006, Improving fatigue strength of metals using abrasive waterjet peening, Mach. Sci. Technol., 10, 197, 10.1080/10910340600710105

He, 2020, Surface hardening of metals at room temperature by nanoparticle-laden cavitating waterjets, J. Mater. Process. Technol., 275, 116316, 10.1016/j.jmatprotec.2019.116316

Lieblich, 2016, On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening, J. Mech. Behav. Biomed. Mater., 63, 390, 10.1016/j.jmbbm.2016.07.011

Naito, 2012, Development of peening technique using recirculating shot accelerated by water jet, Mater. Sci. Technol., 28, 234, 10.1179/1743284711Y.0000000027

Reck, 2019, Fatigue behavior of non-optimized laser-cut medical grade ti-6AL-4V-ELI sheets and the effects of mechanical post-processing, Metals, 9, 843, 10.3390/met9080843

Wu, 2018, Effect of turning and surface polishing treatments on surface integrity and fatigue performance of nickel-based alloy GH4169, Metals, 8, 10.3390/met8070549

Prevéy, 2001, Low cost corrosion damage mitigation and improved fatigue performance of low plasticity burnished 7075-T6, J. Mater. Eng. Perform., 10, 548, 10.1361/105994901770344692

Hua, 2019, Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718, Surf. Coating. Technol., 375, 508, 10.1016/j.surfcoat.2019.07.057

Revankar, 2017, Wear resistance enhancement of titanium alloy (Ti-6Al-4V) by ball burnishing process, J. Mater. Res. Technol., 6, 13, 10.1016/j.jmrt.2016.03.007

Pu, 2012, Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy, Corrosion Sci., 57, 192, 10.1016/j.corsci.2011.12.018

Pu, 2015

Temmler, 2020, Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11, Mater. Des., 192, 108689, 10.1016/j.matdes.2020.108689

Yung, 2019, Laser polishing of additive manufactured tool steel components using pulsed or continuous-wave lasers, Int. J. Adv. Manuf. Technol., 105, 425, 10.1007/s00170-019-04205-z

Preußner, 2014, Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel, Int. J. Mater. Res., 105, 328, 10.3139/146.111027

Zhou, 2019

Ma, 2017, Laser polishing of additive manufactured Ti alloys, Optic Laser. Eng., 93, 171, 10.1016/j.optlaseng.2017.02.005

Raeymaekers, 2010, The effect of laser polishing on fretting wear between a hemisphere and a flat plate, Wear, 269, 416, 10.1016/j.wear.2010.04.027

Chen, 2020, Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing, Addit. Manuf., 32, 101013

Murray, 2014, Nanostructures in austenitic steel after EDM and pulsed electron beam irradiation, Surf. Coating. Technol., 259, 465, 10.1016/j.surfcoat.2014.10.045

Murray, 2012, Repair of EDM induced surface cracks by pulsed electron beam irradiation, J. Mater. Process. Technol., 212, 2642, 10.1016/j.jmatprotec.2012.07.018

Uno, 2003, Surface modification of EDMed surface by wide-area electron beam irradiation, J. Japan Soc. Eng. Educ., 51, 58

Proskurovsky, 2000, Physical foundations for surface treatment of materials with low energy, high current electron beams, Surf. Coating. Technol., 125, 49, 10.1016/S0257-8972(99)00604-0

Proskurovsky, 1998, Pulsed electron-beam technology for surface modification of metallic materials, J. Vac. Sci. Technol. A Vacuum, Surfaces, Film., 16, 2480, 10.1116/1.581369

Zhang, 2013, Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam, Vacuum, 87, 60, 10.1016/j.vacuum.2012.03.061

Yang, 2019

Guo, 2020, Enhancing anti-wear and anti-corrosion performance of cold spraying aluminum coating by high current pulsed electron beam irradiation, Vacuum, 182, 109772, 10.1016/j.vacuum.2020.109772

Meisner, 2018

Proskurovsky, 1997, Use of low-energy, high-current electron beams for surface treatment of materials, Surf. Coating. Technol., 96, 117, 10.1016/S0257-8972(97)00093-5

Markov, 1997, Calculation and experimental determination of dimensions of hardening and tempering zones in quenched U7A steel irradiated with a pulsed electron beam, Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 132, 79, 10.1016/S0168-583X(97)00416-3

Lee, 2020, Microstructure and corrosion resistance of a Mg2Sn-dispersed Mg alloy subjected to pulsed electron beam treatment, J. Magnes. Alloy., 8, 345, 10.1016/j.jma.2020.02.005

Hao, 2013, Improvement of surface microhardness and wear resistance of WC/Co hard alloy by high current pulsed electron beam irradiation, Int. J. Refract. Metals Hard Mater., 41, 553, 10.1016/j.ijrmhm.2013.07.006

Walker, 2011, Dry sliding friction and wear behaviour of an electron beam melted hypereutectic Al–Si alloy, Tribol. Lett., 1

Zaguliaev, 2019

Gnyusov, 2004, The effect of pulsed electron beam melting on microstructure, friction and wear of WC–Hadfield steel hard metal, Wear, 257, 97, 10.1016/j.wear.2003.10.011

Zou, 2010, Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment, Thin Solid Films, 519, 1404, 10.1016/j.tsf.2010.09.022

Ivanov, 2000, Pulsed electron-beam treatment of WC–TiC–Co hard-alloy cutting tools: wear resistance and microstructural evolution, Surf. Coating. Technol., 125, 251, 10.1016/S0257-8972(99)00569-1

Algodi, 2018, Wear performance of TiC/Fe cermet electrical discharge coatings, Wear, 402

Murray, 2018, Defect-free TiC/Si multi-layer electrical discharge coatings, Mater. Des., 155, 352, 10.1016/j.matdes.2018.06.019

Li, 2020, Anti-wear hierarchical TiC enhanced cermet coating obtained via electrical discharge coating using a reduced graphene oxide nanosheets mixed dielectric, Ceram. Int.

Tyagi, 2018, Electrical discharge coating using WS2 and Cu powder mixture for solid lubrication and enhanced tribological performance, Tribol. Int., 120, 80, 10.1016/j.triboint.2017.12.023

Zeng, 2015, Friction and wear behaviors of TiCN coating based on electrical discharge coating, Trans. Nonferrous Metals Soc. China, 25, 3716, 10.1016/S1003-6326(15)64013-4

Murray, 2017, Formation mechanism of electrical discharge TiC-Fe composite coatings, J. Mater. Process. Technol., 243, 143, 10.1016/j.jmatprotec.2016.12.011

Janeček, 2011, Fatigue endurance of Ti-6Al-4V alloy with electro-eroded surface for improved bone in-growth, J. Mech. Behav. Biomed. Mater., 4, 417, 10.1016/j.jmbbm.2010.12.001

Ganesh Sundara Raman, 1995, Effect of electropolishing on the room-temperature low-cycle fatigue behaviour of AISl 304LN stainless steel, Int. J. Fatig., 17, 179, 10.1016/0142-1123(95)98938-Y

Gao, 2007, Influence of surface integrity on fatigue strength of 40CrNi2Si2MoVA steel, Mater. Lett., 61, 466, 10.1016/j.matlet.2006.04.089

Laamouri, 2013, Evaluation of residual stress relaxation and its effect on fatigue strength of AISI 316L stainless steel ground surfaces: experimental and numerical approaches, Int. J. Fatig., 48, 109, 10.1016/j.ijfatigue.2012.10.008

Shahzad, 2012, Effect of sealed anodic film on fatigue performance of 2214-T6 aluminum alloy, Surf. Coating. Technol., 206, 2733, 10.1016/j.surfcoat.2011.10.033

Sadeler, 2006, Effect of a commercial hard anodizing on the fatigue property of a 2014-T6 aluminium alloy, J. Mater. Sci., 41, 5803, 10.1007/s10853-006-0725-0

de Camargo, 2007, Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy, Surf. Coating. Technol., 201, 9448, 10.1016/j.surfcoat.2007.03.032

Montero, 2020, Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy, Corrosion Sci., 166, 108472, 10.1016/j.corsci.2020.108472

Han, 2015, Effect of electropolishing on corrosion of Alloy 600 in high temperature water, Corrosion Sci., 98, 72, 10.1016/j.corsci.2015.05.026

Shim, 2019, Effect of electropolishing on general corrosion of Alloy 690TT tubes in simulated primary coolant of pressurized water reactors, Appl. Surf. Sci., 467, 10.1016/j.apsusc.2018.10.178

Han, 2015, Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment, J. Nucl. Mater., 467, 194, 10.1016/j.jnucmat.2015.09.029

Lee, 2003, The effects of electropolishing (EP) process parameters on corrosion resistance of 316L stainless steel, J. Mater. Process. Technol., 140, 206, 10.1016/S0924-0136(03)00785-4

Ziemniak, 2008, Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water, Corrosion Sci., 50, 2465, 10.1016/j.corsci.2008.06.032

Simka, 2010, Electropolishing and passivation of NiTi shape memory alloy, Electrochim. Acta, 55, 2437, 10.1016/j.electacta.2009.11.097

Chu, 2008, Surface structure and biomedical properties of chemically polished and electropolished NiTi shape memory alloys, Mater. Sci. Eng. C, 28, 1430, 10.1016/j.msec.2008.03.009

Milošev, 2012, The corrosion resistance of Nitinol alloy in simulated physiological solutions, Mater. Sci. Eng. C, 32, 1087, 10.1016/j.msec.2011.11.007

Hou, 2018, Electropolishing of Al and Al alloys in AlCl 3/trimethylamine hydrochloride ionic liquid, Surf. Coating. Technol., 335, 72, 10.1016/j.surfcoat.2017.12.028

Wang, 2019, Fabrication of superhydrophobic metallic surface on the electrical discharge machining basement, Appl. Surf. Sci., 478, 110, 10.1016/j.apsusc.2019.01.102

Zeng, 2015, Subsurface characterisation of wear on mechanically polished and electro-polished biomedical grade CoCrMo, Wear, 332–333, 650, 10.1016/j.wear.2015.02.007

Picas, 2007, Hard anodizing of aluminium matrix composite A6061/(Al2O3)p for wear and corrosion resistance improvement, Plasma Process. Polym., 4, S579, 10.1002/ppap.200731409

Wu, 2019, Microstructure and properties of TiO2 nanotube coatings on bone plate surface fabrication by anodic oxidation, Surf. Coating. Technol., 374, 362, 10.1016/j.surfcoat.2019.06.019

Vaezi, 2008, Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics, Colloids Surfaces A Physicochem. Eng. Asp., 315, 176, 10.1016/j.colsurfa.2007.07.027

Liu, 2015, Producing cobalt–graphene composite coating by pulse electrodeposition with excellent wear and corrosion resistance, Appl. Surf. Sci., 351, 889, 10.1016/j.apsusc.2015.06.018

Absolute Zero - UK FIRES, (n.d.). https://ukfires.org/absolute-zero/.

Black, 2020

Field, 1964, The surface integrity of machined and high strength steels, DMIC Rep, 54