Tribological properties of titanium alloys under lubrication of SEE oil and aqueous solutions

Ezugwu, 1997, Titanium alloys and their machinability-a review, J Mater Process Technol, 68, 262, 10.1016/S0924-0136(96)00030-1 Veiga, 2012, Properties and applications of titanium alloys: a brief review, Rev Adv Mater Sci, 32, 133 Ezugwu, 2005, Key improvements in the machining of difficult-to-cut aerospace superalloys, Int J Mach Tools Manuf, 45, 1353, 10.1016/j.ijmachtools.2005.02.003 Pramanik, 2014, Problems and solutions in machining of titanium alloys, Int J Adv Manuf Technol, 70, 919, 10.1007/s00170-013-5326-x Egana, 2012, Characterization of friction and heat partition coefficients during machining of a TiAl6V4 titanium alloy and a cemented carbide, Tribol Trans, 55, 665, 10.1080/10402004.2012.692007 Dong, 2010, 662 Cheng, 2014, Dry-sliding tribological properties of TiAl/Ti2AlC composites, Tribol Lett, 53, 457, 10.1007/s11249-013-0284-x Zhang, 2016, Investigation on tribo-layers and their function of a titanium alloy during dry sliding, Tribol Int, 94, 541, 10.1016/j.triboint.2015.10.018 Farokhzadeh, 2016, Transition between mild and severe wear in titanium alloys, Tribol Int, 94, 98, 10.1016/j.triboint.2015.08.020 Straffelini, 1999, Dry sliding wear of Ti-6Al-4V alloy as influenced by the counterface and sliding conditions, Wear, 236, 328, 10.1016/S0043-1648(99)00292-6 Li, 2006, Sliding wear of TiAl intermetallics against steel and ceramics of Al2O3, Si3N4 and WC/Co, Wear, 261, 693, 10.1016/j.wear.2006.01.044 Qu, 2004, Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces, Wear, 258, 1348, 10.1016/j.wear.2004.09.062 Cheng, 2015, The role of oxidation and counterface in the high temperature tribological properties of TiAl intermetallics, Mater Des, 84, 245, 10.1016/j.matdes.2015.06.115 Taktak, 2007, Dry wear and friction behaviour of plasma nitrided Ti–6Al–4V alloy after explosive shock treatment, Tribol Int, 40, 423, 10.1016/j.triboint.2006.02.060 Niu, 2013, Friction and wear performance of titanium alloys against tungsten carbide under dry sliding and water lubrication, Tribol Trans, 56, 101, 10.1080/10402004.2012.729296 Niu, 2014, Study on the tribological properties of titanium alloys sliding against WC-Co during the dry friction, Ind Lubr Tribol, 66, 202, 10.1108/ILT-11-2011-0099 Amanov, 2013, A study on the tribological characteristics of duplex-treated Ti–6Al–4V alloy under oil-lubricated sliding conditions, Tribol Int, 64, 155, 10.1016/j.triboint.2013.03.015 Dutt Sharma, 2014, Experimental study of friction and wear characteristics of titanium alloy (Ti-6Al-4V) under lubricated sliding condition, Ind Lubr Tribol, 66, 174, 10.1108/ILT-10-2011-0079 Cheng, 2012, The tribological behavior of a Ti-46Al-2Cr-2Nb alloy under liquid paraffine lubrication, Tribol Lett, 46, 233, 10.1007/s11249-012-9942-7 Wang, 2008, Sliding friction and wear performance of Ti6Al4V in the presence of surface-capped copper nanoclusters lubricant, Tribol Int, 41, 158, 10.1016/j.triboint.2007.07.010 Jiménez, 2009, Ionic liquids as lubricants of titanium–teel contact, Tribol Lett, 33, 111, 10.1007/s11249-008-9396-0 Jiménez, 2010, Ionic liquids as lubricants of titanium–steel contact. Part 3. Ti6Al4V lubricated with imidazolium ionic liquids with different alkyl chain lengths, Tribol Lett, 40, 237, 10.1007/s11249-010-9633-1 Jiménez, 2010, Ionic liquids as lubricants of titanium-steel contact. Part 2: friction, wear and surface interactions at high temperature, Tribol Lett, 37, 431, 10.1007/s11249-009-9539-y Zhang, 2013, Green tribology: fundamentals and future development, Friction, 1, 186, 10.1007/s40544-013-0012-4 Briscoe, 2006, Boundary lubrication under water, Nature, 444, 191, 10.1038/nature05196 Ma, 2012, Progress in experimental study of aqueous lubrication, Chin Sci Bull, 57, 2062, 10.1007/s11434-012-5031-4 Tomala, 2010, Tribological properties of additives for water-based lubricants, Wear, 269, 804, 10.1016/j.wear.2010.08.008 Zhang, 2012, EHL properties of polyalkylene glycols and their aqueous solutions, Tribol Lett, 45, 379, 10.1007/s11249-011-9883-6 Ratoi, 1999, Lubricating properties of aqueous surfactant solutions, Tribol Trans, 42, 479, 10.1080/10402009908982244 Zhang, 2013, Lubricating properties of polyalkylene glycol and organic phosphate ester mixed aqueous solutions, Sci China Technol Sci, 56, 2988, 10.1007/s11431-013-5392-1 Brinksmeier, 2015, Metalworking fluids-mechanisms and performance, CIRP Ann Manuf Technol, 64, 605, 10.1016/j.cirp.2015.05.003 YanP., RongY., WangG.The effect of cutting fluids applied in metal cutting process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016, 230(1), pp. 19–37. Anders Pettersson, 2008, Additives for environmentally adapted lubricants-friction and wear protection, Tribol Online, 3, 163, 10.2474/trol.3.163 Jayal, 2009, Effects of cutting fluid application on tool wear in machining: interactions with tool-coatings and tool surface features, Wear, 267, 1723, 10.1016/j.wear.2009.06.032 Yang, 2016, Friction and wear performance of titanium alloy against tungsten carbide lubricated with phosphate ester, Tribol Int, 95, 27, 10.1016/j.triboint.2015.10.031 Zhang, 2005, Research on thin film lubrication: state of the art, Tribol Int, 38, 443, 10.1016/j.triboint.2004.10.011 Alam, 2002, Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel, Tribol Int, 35, 357, 10.1016/S0301-679X(02)00015-4 Abdel-Aal, 2003, On the interdependence between kinetics of friction-released thermal energy and the transition in wear mechanisms during sliding of metallic pairs, Wear, 254, 884, 10.1016/S0043-1648(03)00243-6 Basu, 2009, Understanding friction and wear mechanisms of high-purity titanium against steel in liquid nitrogen temperature, Metall Mater Trans A-Phys Metall Mater Sci, 40A, 472, 10.1007/s11661-008-9721-0 Ma, 2010, Effect of solid surface on the formation of thin confined lubricating film of water with micro-content of oil, Appl Surf Sci, 256, 6574, 10.1016/j.apsusc.2010.04.050 Zhang, 2014, Stick–slip friction of stainless steel in sodium dodecyl sulfate aqueous solution in the boundary lubrication regime, Tribol Lett, 56, 543, 10.1007/s11249-014-0431-z