The Effect of the Surface Treating and High-Temperature Aging on the Strength and SCC Susceptibility of 7075 Aluminum Alloy

J.E. Hatch, Ed., Aluminum Properties and Physical Metallurgy, American Society for Metals, OH, 1984

G. Sha and A. Cerezo, Early-Stage Precipitation in Al–Zn–Mg–Cu Alloy (7050), Acta Mater., 2004, 52, p 4503

N.Q. Chinh, J. Lendvai, D.H. Ping, and K. Hono, The Effect of Cu on Mechanical and Precipitation Properties of Al–Zn–Mg Alloys, J. Alloys Compd., 2004, 378, p 52

B.L. Ou, J.G. Yang, and M.Y. Wei, Effect of Homogenization and Aging Treatment on Mechanical Properties and Stress-Corrosion Cracking of 7050 Alloys, Metall. Mater. Trans., 2007, 38A, p 1760

M. Puiggali, A. Zielinski, J.M. Olive, E. Renauld, D. Desjardins, and M. Cid, Effect of Microstructure on Stress Corrosion Cracking of an Al-Zn-Mg-Cu Alloy, Corros. Sci., 1998, 40, p 805

J.C. Lin, H.L. Liao, W.D. Jehng, C.H. Chang, and S.L. Lee, Effect of Heat Treatments on the Tensile Strength and SCC-Resistance of AA7050 in an Alkaline Saline Solution, Corros. Sci., 2006, 48, p 3139

K. Rajan, W. Wallace, and J.C. Beddoes, Microstructural Study of a High-Strength Stress-Corrosion Resistant 7075 Aluminium Alloy, J. Mater. Sci., 1982, 17, p 2817

A.F. Oliveira, M.C. de Barros, K.R. Cardoso, and D.N. Travessa, The Effect of RRA on the Strength and SCC Resistance on AA7050 and AA7150 Aluminium Alloys, Mater. Sci. Eng. A, 2004, 379, p 321

M. Dixit, R.S. Mishra, and K.K. Sankaran, Structure–Property Correlations in Al 7050 and Al 7055 High-Strength Aluminum Alloys, Mater. Sci. Eng. A, 2008, 478, p 163

B.M. Cina, Reducing the Susceptibility of Alloys, Particularly Aluminum Alloys, to Stress Corrosion Cracking, U.S. Patent 3,856,584, 1974

B.L. Ou, J.G. Yang, and C.K. Yang, Effects of Step-Quench and Aging on Mechanical Properties and Resistance to Stress Corrosion Cracking of 7050 Aluminum Alloy, Mater. Trans., 2000, 41, p 783

L.P. Huang, K.H. Chen, S. Li, and M. Song, Influence of High-Temperature Pre-Precipitation on Local Corrosion Behaviors of Al–Zn–Mg Alloy, Scr. Mater., 2007, 56, p 305

M. Song and K. Chen, Effects of the Enhanced Heat Treatment on the Mechanical Properties and Stress Corrosion Behavior of an Al–Zn–Mg Alloy, J. Mater. Sci., 2008, 43, p 5265

S. You, P. Jones, A. Padwal, P. Yu, M. O’Keefe, W. Fahrenholtz, and T. O’Keefe, Response of Nanocrystalline Cerium-Based Conversion Coatings on Al 2024–T3 to Chloride Environments, Mater. Lett, 2007, 61(17), p 3778

H. Rahmatalla, M. Al-Rimawi, and T. Al-Hadid, Effect of Shot-Peening on Stress Corrosion Cracking (SCC) of 7075-T6 Aluminium Alloy, Proceedings of the ICSP-6 Conference, 1996, p 184

J. Fader, C. Keeney, J. Hawkins, M. Clements, and S. Yollick, Anti-Corrosion Coating Applied During Shot-Peening Process, U.S. Patent 6,874,214, 2005

H.L. Liao, J.C. Lin, and S.L. Lee, Effect of Pre-Immersion on the SCC of Heat-Treated AA7050 in an Alkaline 3.5% NaCl, Corros. Sci., 2009, 51, p 209

A. Deschamps, Y. Brechet, P. Guyot, and F. Livet, On the Influence of Dislocations on Precipitation in an Al-Zn-Mg Alloy, Z. Metallkd., 1997, 88, p 601

A. Deschamps, F. Livet, and Y. Brechet, Influence of Predeformation on Ageing in an Al–Zn–Mg Alloy—I. Microstructure Evolution and Mechanical Properties, Acta Mater., 1999, 47, p 281

M. Talianker and B. Cina, Retrogression and Reaging and the Role of Dislocations in the Stress Corrosion of 7000-Type Aluminum Alloys, Metall. Trans., 1989, 20A, p 2087

L. Wagner and C. Mueller, Effect of Shot-Peening on Fatigue Behaviour in Al-Alloys, Mater. Manuf. Processes, 1992, 7, p 423

M. Hilpert, “Dauerschwingverhalten von Magnesiumlegierungen: Einfluss von mechanischen Oberfl¨achenbehandlungen und Umgebungsmedien,” Dr.-Ing. Thesis, BTU Cottbus, 2001

J.K. Gregory and L. Wagner, Shot-Peening, L. Wagner, Ed., Wiley–VCH, Weinheim, 2003

Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu, Microstructures and Mechanical Properties of Ultrafine Grained 7075 Al Alloy Processed by ECAP and Their Evolutions During Annealing, Acta Mater., 2004, 52, p 4589

Y.H. Zhao, K. Zhang, and K. Lu, Structure Characteristics of Nanocrystalline Element Selenium with Different Grain Sizes, Phys. Rev. B, 1997, 56, p 14322

T.C. Tsai, J.C. Chang, and T.H. Chuang, Stress Corrosion Cracking of Superplastically Formed 7475 Aluminum Alloy, Metall. Mater. Trans., 1997, 28A, p 2113

G. Waterloo, V. Hansen, J. Gjonnes, and S.R. Skjervold, Effect of Predeformation and Preaging at Room Temperature in Al–Zn–Mg–(Cu, Zr) Alloys, Mater. Sci. Eng. A, 2001, 303, p 226

D. Wang and Z.Y. Ma, Effect of Pre-strain on Microstructure and Stress Corrosion Cracking of Over-Aged 7050 Aluminum Alloy, J. Alloys Compd., 2009, 469, p 445

D. Dumont, A. Deschamps, and Y. Brechet, On the Relationship Between Microstructure, Strength and Toughness in AA7050 Aluminum Alloy, Mater. Sci. Eng. A, 2003, 356, p 326

D. Najjar, T. Magnin, and T.J. Warner, Influence of Critical Surface Defects and Localized Competition Between Anodic Dissolution and Hydrogen Effects During Stress Corrosion Cracking of a 7050 Aluminium Alloy, Mater Sci. Eng. A, 1997, 238, p 293

Metals Handbook, Vol 1, American Society for Metals, Cleveland, OH, 1961

J. Albrecht, I.M. Bernstein, and A.W. Thompson, Evidence for Dislocation Transport of Hydrogen in Aluminum, Metall. Trans., 1982, 13A, p 811

D. Nguyen, A.W. Thompson, and I.M. Bernstein, Microstructural Effects on Hydrogen Embrittlement in a High Purity 7075 Aluminum Alloy, Acta Metall., 1987, 35, p 2417

R.G. Song, W. Dietzel, B.J. Zhang, W.J. Liu, M.K. Tseng, and A. Atrens, Stress Corrosion Cracking and Hydrogen Embrittlement of an Al–Zn–Mg–Cu Alloy, Acta Mater., 2004, 52, p 4727

R.G. Song, M.K. Tseng, B.J. Zhang, J. Liu, Z.H. Jin, and K.S. Shin, Grain Boundary Segregation and Hydrogen-Induced Fracture in 7050 Aluminium Alloy, Acta Mater., 1996, 44, p 3241

R. Deiasi and P.N. Adler, Calorimetric Studies of 7000 Series Aluminum Alloys: I. Matrix Precipitate Characterization of 7075, Metall Trans., 1977, 8A, p 1177

Y.H. Zhao, X.Z. Liao, S. Cheng, E. Ma, and Y.T. Zhu, Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys, Adv. Mater., 2006, 18, p 2280

R.E. Smallman and K.H. Westmacott, Stacking Faults in Face-Centred Cubic Metals and Alloys, Philos. Mag., 1957, 2, p 669

S. Cheng, Y.H. Zhao, Y.T. Zhu, and E. Ma, Optimizing the Strength and Ductility of Fine Structured 2024 Al Alloy by Nano-Precipitation, Acta Mater., 2007, 55, p 5822

I.J. Polmear, Light Alloys, 4th ed., Butterworth-Heinmann, Oxford, 2006