Review of aerospace-oriented spray cooling technology

Wang, 2020, Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China, Chin. J. Aeronaut., 10.1016/j.cja.2020.06.021 Brelje, 2019, Electric, hybrid, and turboelectric fixed-wing aircraft: a review of concepts, models, and design approaches, Prog. Aero. Sci., 104, 1, 10.1016/j.paerosci.2018.06.004 Gnadt, 2019, Technical and environmental assessment of all-electric 180-passenger commercial aircraft, Prog. Aero. Sci., 105, 1, 10.1016/j.paerosci.2018.11.002 Liang, 2017, Review of spray cooling – Part 1: single-phase and nucleate boiling regimes, and critical heat flux, Int. J. Heat Mass Tran., 115, 1174, 10.1016/j.ijheatmasstransfer.2017.06.029 Francois, 2002, Micro-scale drop dynamics for heat transfer enhancement, Prog. Aero. Sci., 38, 275, 10.1016/S0376-0421(02)00006-4 Wang, 2016, Experimental investigation of the thermal control effects of phase change material based packaging strategy for on-board permanent magnet synchronous motors, Energy Convers. Manag., 123, 232, 10.1016/j.enconman.2016.06.045 Chen, 2010, Thermal and hydrodynamic characteristics of constructal tree‐shaped minichannel heat sink, AIChE J., 56, 2018 Wang, 2017, Conception and experimental investigation of a hybrid temperature control method using phase change material for permanent magnet synchronous motors, Exp. Therm. Fluid Sci., 81, 9, 10.1016/j.expthermflusci.2016.10.005 Yang, 2019, An integrated liquid metal thermal switch for active thermal management of electronics, IEEE Trans. Compon. Packag. Manuf., 9, 2341, 10.1109/TCPMT.2019.2930089 K. Xiong, Y. Li, Y. Z. Li, J. X. Wang. Power loss and efficiency analysis of an onboard three-level brushless synchronous generator. Int. J. Electron. Article in Press. DOI: 10.1080/00207217.2020.1756450. Zhang, 2020, Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins, Appl. Energy, 259, 114102, 10.1016/j.apenergy.2019.114102 Shanmugasundaram, 2005, Analytical investigation of thermal management options for an aircraft based high pulsed power system Application Sohel Murshed, 2017, A critical review of traditional and emerging techniques and fluids for electronics cooling, Renew. Sustain. Energy Rev., 78, 821, 10.1016/j.rser.2017.04.112 Mertens, 2007, Spray cooling of IGBT devices, J. Eletron. Packag., 129, 316, 10.1115/1.2753937 Agostini, 2007, State of the art of high heat flux cooling technologies, Heat Tran. Eng., 28, 258, 10.1080/01457630601117799 Wang, 2018, Enhanced heat transfer by an original immersed spray cooling system integrated with an ejector, Energy, 158, 512, 10.1016/j.energy.2018.06.019 Schmidt, 2017, Near-space station-keeping performance of a large high-altitude notional airship, J. Aircraft, 44, 611, 10.2514/1.24863 Liu, 2013, Dynamic performance analysis on start-up of closed-loop pulsating heat pipes (CLPHPs), Int. J. Therm. Sci., 65, 224, 10.1016/j.ijthermalsci.2012.10.012 Visaria, 2009, Application of two-phase spray cooling for thermal management of electronic devices, IEEE Trans. Compon. Packag. Technol., 32, 784, 10.1109/TCAPT.2008.2010405 Swanson, 2003, NASA thermal control technologies for robotic spacecraft, Appl. Therm. Eng., 23, 1055, 10.1016/S1359-4311(03)00036-X Wang, 2016, A highly self-adaptive cold plate for the single-phase mechanically pumped fluid loop for spacecraft thermal management, Energy Convers. Manag., 111, 57, 10.1016/j.enconman.2015.12.051 Xu, 2019, A thermoelectric-heat-pump employed active control strategy for the dynamic cooling ability distribution of liquid cooling system for the space station's main power-cell-arrays, Entropy, 21, 578, 10.3390/e21060578 Mao, 2019, Cooling ability/capacity and exergy penalty analysis of each heat sink of modern supersonic aircraft, Entropy, 21, 223, 10.3390/e21030223 Liu, 2018, Heat transfer optimization of R134a phase change spray cooling in a closed loop system, Exp. Therm. Fluid Sci., 92, 248, 10.1016/j.expthermflusci.2017.11.010 Paris, 1992, Surface roughness and its effects on the heat transfer mechanism in spray cooling, J. Heat Tran., 114, 211, 10.1115/1.2911248 Mudawar, 2009, Two-phase spray cooling of hybrid vehicle electronics, IEEE Trans. Compon. Packag. Technol., 32, 501, 10.1109/TCAPT.2008.2006907 Zhang, 2011, Flow boiling in constructal tree-shaped minichannel network, Int. J. Heat Mass Tran., 54, 202, 10.1016/j.ijheatmasstransfer.2010.09.051 Chen, 2017, Hydrodynamics of droplet passing through a microfluidic T-junction, J. Fluid Mech., 819, 401, 10.1017/jfm.2017.181 Liu, 2016, Bubble breakup in a microfluidic T-junction, Sci. Bull., 61, 811, 10.1007/s11434-016-1067-1 Jiang, 2019, A review of impinging jets during rocket launching, Prog. Aero. Sci., 109, 100547, 10.1016/j.paerosci.2019.05.007 Abdolzadeh, 2009, Improving the effectiveness of a photovoltaic water pumping system by spraying water over the front of photovoltaic cells, Renew. Energy, 34, 91, 10.1016/j.renene.2008.03.024 Cotler, 2004, Chip-Level spray cooling of an LD-MOSFET RF power amplifier, IEEE Trans. Compon. Packag. Technol., 27, 411, 10.1109/TCAPT.2004.828550 Hsieh, 2014, A microspray-based cooling system for high power LEDs, Energy Convers. Manag., 78, 338, 10.1016/j.enconman.2013.10.066 Chen, 2017, Energy saving evaluation of a novel energy system based on spray cooling for supercomputer center, Energy, 141, 304, 10.1016/j.energy.2017.09.089 Chakraborty, 2018, Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate, Powder Technol., 335, 285, 10.1016/j.powtec.2018.05.004 Aguilar, 2005, Effects of hypobaric pressure on human skin: implications for cryogen spray cooling (part II), Laser Surg. Med., 36, 130, 10.1002/lsm.20149 Toda, 1972, A study of mist cooling: 1st report, experimental investigations on mist cooling by mist flow sprayed vertically on small and flat plates heated at high temperatures, Transactions of the Japan Society of Mechanical Engineers, 38, 581, 10.1299/kikai1938.38.581 Wang, 2019, Ground-based near-space-oriented spray cooling: temperature uniformity analysis and performance prediction, J. Thermophys. Heat Tran., 33, 617, 10.2514/1.T5547 Cheng, 2016, Spray cooling and flash evaporation cooling: the current development and application, Renew. Sustain. Energy Rev., 55, 614, 10.1016/j.rser.2015.11.014 Chen, 2019, Unsteady characteristics of liquid nitrogen cavitating flows in different thermal cavitation mode, Appl. Therm. Eng., 156, 63, 10.1016/j.applthermaleng.2019.04.024 Golliher, 2005, Exploration of unsteady spray cooling for high power electronics at microgravity using NASA Glenn's drop tower Baysinger, 2004, Design of a microgravity spray cooling experiment Kato, 1994, Spray cooling characteristics under reduced gravity, J. Thermophys. Heat Tran., 9, 378, 10.2514/3.675 Yoshida, 2001, Spray cooling under reduced gravity condition, J. Heat Tran., 123, 309, 10.1115/1.1345887 Elston, 2009, Cooling performance of a 16-nozzle array in variable gravity, J. Thermophys. Heat Tran., 23, 571, 10.2514/1.41653 Kreitzer, 2006, Electrical force effects on spray cooling DiMarco, 2002, Motivation and results of a long-term research on pool boiling heat transfer in low gravity, Int. J. Therm. Sci., 41, 567, 10.1016/S1290-0729(02)01351-0 Hunell, 2006, Spray cooling in terrestrial and simulated reduced gravity Rybicki, 2006, Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays, Int. J. Heat Mass Tran., 49, 5, 10.1016/j.ijheatmasstransfer.2005.07.040 Cheng, 2015, Effect of droplet flash evaporation on vacuum flash evaporation cooling: Modelling, Int. J. Heat Mass Tran., 84, 149, 10.1016/j.ijheatmasstransfer.2014.12.078 O'Rourke, 1987, 872089 Yule, 1994 Zeng, 2001, An atomization model for flash boiling sprays, Combust. Sci. Technol., 169, 45, 10.1080/00102200108907839 Kawano, 2006, Numerical study on flash-boiling spray of multicomponent fuel, Heat Tran. Asian Res., 35, 369, 10.1002/htj.20117 Suma, 1977, Internal boiling atomization by rapid pressure reduction of liquids, Trans. JSME (B), 43, 4608, 10.1299/kikai1938.43.4608 Zeng, 2012, Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels, Fuel, 95, 287, 10.1016/j.fuel.2011.08.048 Chen, 2018, Experimental and mathematical study of the spray flash evaporation phenomena, Appl. Therm. Eng., 130, 598, 10.1016/j.applthermaleng.2017.11.018 Lord Rayleigh, 1917, On the pressure developed in a liquid during the collapse of a spherical cavity, The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 34, 94, 10.1080/14786440808635681 Mao, 2018, Effect of overheat degree on water spray atomization under flash boiling condition, Acta Aeronautica Astronautica Sinica, 39, 722184 Wang, 2017, Study on water droplet flash evaporation in vacuum spray cooling, Int. J. Heat Mass Tran., 112, 279, 10.1016/j.ijheatmasstransfer.2017.04.111 Shin, 2000, Spherical-shaped ice particle production by spraying water in a vacuum chamber, Appl. Therm. Eng., 20, 439, 10.1016/S1359-4311(99)00035-6 Kim, 1997, Some critical transitions in pool flash evaporation, Int. J. Heat Mass Tran., 40, 2363, 10.1016/S0017-9310(96)00296-7 Liao, 2017, Computational modelling of flash boiling flows: a literature survey, Int. J. Heat Mass Tran., 111, 246, 10.1016/j.ijheatmasstransfer.2017.03.121 Wang, 2019, Study on water flash evaporation under reduced pressure, Int. J. Heat Mass Tran., 131, 31, 10.1016/j.ijheatmasstransfer.2018.11.009 Wang, 2018, Modelling of liquid nitrogen spray cooling in an electronic equipment cabin under low pressure, Appl. Therm. Eng., 136, 319, 10.1016/j.applthermaleng.2018.02.095 Wang, 2018, Investigation of heat transfer mechanism of low environmental pressure large-space spray cooling for near-space flight system, Int. J. Heat Mass Tran., 119, 496, 10.1016/j.ijheatmasstransfer.2017.11.128 Nash, 2019, Control-oriented modeling of integrated flash boiling for rapid transient heat dissipation, J. Thermophys. Heat Tran., 33, 817, 10.2514/1.T5604 Golliher, 2007, Development of the compact flash evaporator system for exploration Golliher, 2008, Testing of a compact flash evaporator system for exploration Althausen, 2008, Testing of an R134a spray evaporative heat sink Li, 2020, Phase separation in vertical header of microchannel condensers – a mechanistic model, J. Fluid Eng., 142 Zhang, 2015, Experimental investigation of spray cooling heat transfer on straight fin surface under acceleration conditions, Exp. Heat Tran., 28, 564, 10.1080/08916152.2014.915273 Zhang, 2012, Investigation of spray cooling: effect of different heater surfaces under acceleration, Int. Commun. Heat Mass Tran., 39, 1311 Wang, 2016, Computer modelling of droplets impact on heat transfer during spray cooling under vibration environment, Appl. Therm. Eng., 107, 453, 10.1016/j.applthermaleng.2016.06.176 Silk, 2008, Spray cooling heat transfer: technology overview and assessment of future challenges for micro-gravity application, Energy Convers. Manag., 49, 453, 10.1016/j.enconman.2007.07.046 Wang, 2013, Transient performance and intelligent combination control of a novel spray cooling loop system, Chin. J. Aeronaut., 26, 1173, 10.1016/j.cja.2013.07.048 Wang, 2015, Investigation of a spray cooling system with two nozzles for space application, Appl. Therm. Eng., 89, 115, 10.1016/j.applthermaleng.2015.05.082 Silk, 2010, Spray cooling heat flux performance using POCO HTC Foam, J. Thermophys. Heat Tran., 24, 157, 10.2514/1.44089 Wang, 2018, Comparative study of the heating surface impact on porous-material-involved spray system for electronic cooling - an experimental approach, Appl. Therm. Eng., 135, 537, 10.1016/j.applthermaleng.2018.02.055 Wang, 2018, A hybrid cooling system combining single-phase mechanically pumped fluid loop and spray module, Energy Convers. Manag., 176, 194, 10.1016/j.enconman.2018.09.010 Bian, 2019, Condensation characteristics of natural gas in the supersonic liquefaction process, Energy, 168, 99, 10.1016/j.energy.2018.11.102 Tang, 2019, Visualization experimental study of the condensing flow regime in the transonic mixing process of desalination-oriented steam ejector, Energy Convers. Manag., 197, 10.1016/j.enconman.2019.111849 Bian, 2018, Supersonic liquefaction properties of natural gas in the Laval nozzle, Energy, 159, 706, 10.1016/j.energy.2018.06.196 Tang, 2020, A double-choking theory as an explanation of the evolution laws of ejector performance with various operational and geometrical parameters, Energy Convers. Manag., 206, 10.1016/j.enconman.2020.112499 Zhang, 2015, Optimization design of a novel closed loop spray cooling system Zhang, 2016, Ground experimental investigation into an ejected spray cooling system for space closed-loop application, Chin. J. Aeronaut., 26, 1173 Bhatt, 2019, Control of spaceborne linear cryocoolers: a review, Prog. Aero. Sci., 109, 100544, 10.1016/j.paerosci.2019.05.004 Huang, 2019, A survey of icephobic coatings and their potential use in a hybrid coating/active ice protection system for aerospace applications, Prog. Aero. Sci., 105, 74, 10.1016/j.paerosci.2019.01.002 Cesare, 2020, Applied radiation physics techniques for diagnostic evaluation of the plasma wind and thermal protection system critical parameters in aerospace re-entry, Prog. Aero. Sci., 112, 100550, 10.1016/j.paerosci.2019.06.001 Wang, 2018, Investigation of a gravity-immune chip-level spray cooling for thermal protection of laser-based wireless power transmission system, Int. J. Heat Mass Tran., 135, 537 Kota, 2007, Conceptual design of a dual latent heat sink for thermal management of pulse heat generating electronic systems Lin, 2009, Design of a thermal management system for directed energy weapons Guo, 2016, An integrated hardware-in-the-loop verification approach for dual heat sink systems of aerospace single phase mechanically pumped fluid loop, Appl. Therm. Eng., 106, 1403, 10.1016/j.applthermaleng.2016.06.140 Guo, 2017, Construction and experimental verification of a novel flexible thermal control system configuration for the autonomous on-orbit services of space missions, Energy Convers. Manag., 138, 273, 10.1016/j.enconman.2017.01.068 Amiri, 2017, Study of aldehydes, carbon monoxide, and particulate contaminants generated in bleed-air simulator, J. Aircraft, 54, 1364, 10.2514/1.C034133 Wang, 2019, A gas-atomized spray cooling system integrated with an ejector loop: ejector modeling and thermal performance analysis, Energy Convers. Manag., 180, 106, 10.1016/j.enconman.2018.10.095 Panda, 2018, High mass flux air atomized spray with subcooled water: a novel methodology to enhance the heat transfer rate in film boiling regime, Int. J. Heat Mass Tran., 120, 1287, 10.1016/j.ijheatmasstransfer.2017.12.051 Yang, 1996, An analytical method to determine the liquid film thickness produced by gas atomized sprays, ASME J. Heat Transfer, 118, 255, 10.1115/1.2824055 Chen, 2002, Effects of spray characteristics on critical heat flux in subcooled water spray cooling, Int. J. Heat Mass Tran., 45, 4033, 10.1016/S0017-9310(02)00113-8 Lin, 2003, Heat Transfer characteristics of spray cooling in a closed loop, Int. J. Heat Mass Tran., 46, 3737, 10.1016/S0017-9310(03)00217-5 Ortiz, 2010, Experiments on steady-state high heat fluxes using spray cooling, Exp. Heat Tran., 12, 215 Cheng, 2010, Experimental investigation of parameters effect on heat transfer of spray cooling, Heat Mass Tran., 46, 911, 10.1007/s00231-010-0631-5