Bilayer porous polymer for efficient passive building cooling

McLinden, 2020, New refrigerants and system configurations for vapor-compression refrigeration, Science, 370, 791, 10.1126/science.abe3692 IEA, 2020 Santillán-Soto, 2019, Comparative analysis of two urban microclimates: energy consumption and greenhouse gas emissions, Sustainability, 11, 2045, 10.3390/su11072045 Lickley, 2020, Quantifying contributions of chlorofluorocarbon banks to emissions and impacts on the ozone layer and climate, Nat. Commun., 11, 1380, 10.1038/s41467-020-15162-7 Li, 2019, Urban heat island impacts on building energy consumption: a review of approaches and findings, Energy, 174, 407, 10.1016/j.energy.2019.02.183 Cheng, 2019, Optimization on fresh outdoor air ratio of air conditioning system with stratum ventilation for both targeted indoor air quality and maximal energy saving, Build. Environ., 147, 11, 10.1016/j.buildenv.2018.10.009 Wang, 2017, A state of art review on methodologies for heat transfer and energy flow characteristics of the active building envelopes, Renew. Sustain. Energy Rev., 78, 1102, 10.1016/j.rser.2017.05.015 Santamouris, 2017, Passive and active cooling for the outdoor built environment – analysis and assessment of the cooling potential of mitigation technologies using performance data from 220 large scale projects, Solar Energy, 154, 14, 10.1016/j.solener.2016.12.006 Luo, 2019, Active building envelope systems toward renewable and sustainable energy, Renew. Sustain. Energy Rev., 104, 470, 10.1016/j.rser.2019.01.005 Bhamare, 2019, Passive cooling techniques for building and their applicability in different climatic zones—the state of art, Energy Build., 198, 467, 10.1016/j.enbuild.2019.06.023 Mandal, 2019, Porous polymers with switchable optical transmittance for optical and thermal regulation, Joule, 3, 3088, 10.1016/j.joule.2019.09.016 Xu, 2020, Multiscale porous elastomer substrates for multifunctional on-skin electronics with passive-cooling capabilities, Proc. Natl. Acad. Sci. U. S. A., 117, 205, 10.1073/pnas.1917762116 Cuce, 2016, A state of the art review of evaporative cooling systems for building applications, Renew. Sustain. Energy Rev., 54, 1240, 10.1016/j.rser.2015.10.066 Chiesa, 2015, Direct evaporative passive cooling of building. A comparison amid simplified simulation models based on experimental data, Build. Environ., 94, 263, 10.1016/j.buildenv.2015.08.014 Pu, 2020, Thermogalvanic hydrogel for synchronous evaporative cooling and low-grade heat energy harvesting, Nano Lett., 20, 3791, 10.1021/acs.nanolett.0c00800 Liu, 2019, Advances and challenges in commercializing radiative cooling, Mater. Today Phys., 11 Zhai, 2017, Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling, Science, 355, 1062, 10.1126/science.aai7899 Yin, 2020, Terrestrial radiative cooling: using the cold universe as a renewable and sustainable energy source, Science, 370, 786, 10.1126/science.abb0971 Lin, 2021, Radiative cooling: fundamental physics, atmospheric influences, materials and structural engineering, applications and beyond, Nano Energy, 80, 10.1016/j.nanoen.2020.105517 Sharifi, 2015, Roof ponds as passive heating and cooling systems: a systematic review, Appl. Energy, 160, 336, 10.1016/j.apenergy.2015.09.061 Zhang, 2018, Impact of post-rainfall evaporation from porous roof tiles on building cooling load in subtropical China, Appl. Therm. Eng., 142, 391, 10.1016/j.applthermaleng.2018.07.033 Cui, 2016, Bio-inspired effective and regenerable building cooling using tough hydrogels, Appl. Energy, 168, 332, 10.1016/j.apenergy.2016.01.058 Zamengo, 2019, Evaluation of cooling ability for a novel heat sink made of polyvinyl alcohol hydrogel, Int. J. Heat Mass Transf., 143, 10.1016/j.ijheatmasstransfer.2019.118523 Lu, 2020, Passive sub-ambient cooling from a transparent evaporation-insulation bilayer, Joule, 4, 2693, 10.1016/j.joule.2020.10.005 Leroy, 2019, High-performance subambient radiative cooling enabled by optically selective and thermally insulating polyethylene aerogel, Sci. Adv., 5, 10.1126/sciadv.aat9480 Mahinroosta, 2018, Hydrogels as intelligent materials: a brief review of synthesis, properties and applications, Mater. Today Chem., 8, 42, 10.1016/j.mtchem.2018.02.004 Pu, 2019, Bioinspired sweating with temperature sensitive hydrogel to passively dissipate heat from high-end wearable electronics, Energy Convers. Manag., 180, 747, 10.1016/j.enconman.2018.11.027 Li, 2020, Fundamentals, materials, and applications for daytime radiative cooling, Adv. Mater. Technol., 5, 10.1002/admt.201901007 Mandal, 2020, Paints as a scalable and effective radiative cooling technology for buildings, Joule, 4, 1350, 10.1016/j.joule.2020.04.010 Li, 2020, Photovoltaic panel cooling by atmospheric water sorption–evaporation cycle, Nat. Sustain., 3, 636, 10.1038/s41893-020-0535-4 Wang, 2020, A thermal management strategy for electronic devices based on moisture sorption-desorption processes, Joule, 4, 435, 10.1016/j.joule.2019.12.005 Matsumoto, 2018, Thermo-responsive gels that absorb moisture and ooze water, Nat. Commun., 9, 2315, 10.1038/s41467-018-04810-8 Cui, 2016, Bio-inspired effective and regenerable building cooling using tough hydrogels, Appl. Energy, 168, 332, 10.1016/j.apenergy.2016.01.058 Nilsson, 1987, Blood flow, temperature, and heat loss of skin exposed to local radiative and convective cooling, J. Investig. Dermatol., 88, 586, 10.1111/1523-1747.ep12470202 Pu, 2020, Promoting energy efficiency via a self‐adaptive evaporative cooling hydrogel, Adv. Mater., 32, 10.1002/adma.201907307 Yang, 2020, Thermal self‐protection of zinc‐ion batteries enabled by smart hygroscopic hydrogel electrolytes, Adv. Energy Mater., 10, 10.1002/aenm.202002898 Mandal, 2018, Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling, Science, 362, 315, 10.1126/science.aat9513 Pátek, 2006, A computationally effective formulation of the thermodynamic properties of LiBr–H2O solutions from 273 to 500K over full composition range, Int. J. Refrig., 29, 566, 10.1016/j.ijrefrig.2005.10.007 Bahadur, 2014, Hierarchical pore morphology of cretaceous shale: a small-angle neutron scattering and ultrasmall-angle neutron scattering study, Energy Fuels, 28, 6336, 10.1021/ef501832k Kobayashi, 1975, Molecular vibrations of three crystal forms of poly(vinylidene fluoride), Macromolecules, 8, 158, 10.1021/ma60044a013 Bormashenko, 2004, Vibrational spectrum of PVDF and its interpretation, Polym. Test., 23, 791, 10.1016/j.polymertesting.2004.04.001 Sim, 2012, FTIR studies of PEMA/PVdF-HFP blend polymer electrolyte system incorporated with LiCF3SO3 salt, Vib. Spectrosc., 58, 57, 10.1016/j.vibspec.2011.11.005 Entezari, 2020, Super atmospheric water harvesting hydrogel with alginate chains modified with binary salts, ACS Mater. Lett., 2, 471, 10.1021/acsmaterialslett.9b00315 Xue, 2020, Creating an eco‐friendly building coating with smart subambient radiative cooling, Adv. Mater., 32, 10.1002/adma.201906751 Wang, 2019, Scalable flexible hybrid membranes with photonic structures for daytime radiative cooling, Adv. Funct. Mater., 30 Zhao, 2020, Switchable cavitation in silicone coatings for energy‐saving cooling and heating, Adv. Mater., 32 Li, 2021, Scalable and hierarchically designed polymer film as a selective thermal emitter for high-performance all-day radiative cooling, Nat. Nanotechnol., 16, 153, 10.1038/s41565-020-00800-4 Zhou, 2019, A polydimethylsiloxane-coated metal structure for all-day radiative cooling, Nat. Sustain., 2, 718, 10.1038/s41893-019-0348-5 Zhang, 2020, Biologically inspired flexible photonic films for efficient passive radiative cooling, Proc. Natl. Acad. Sci. U. S. A., 117, 14657, 10.1073/pnas.2001802117 Li, 2019, A radiative cooling structural material, Science, 364, 760, 10.1126/science.aau9101