Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete

Chinese National Standard, Reactive powder concrete, GB/T 31387–2015, Beijing, 2015. Scrivener, 2008, Innovation in use and research on cementitious material, Cem. Concr. Res., 38, 128, 10.1016/j.cemconres.2007.09.025 Yang, 2018, Evaluation of dynamic increase factor models for steel fibre reinforced concrete, Constr. Build. Mater., 190, 632, 10.1016/j.conbuildmat.2018.09.085 C. Shi, Z. Wu, J. Xiao, et al., A review on ultra-high performance concrete: part I. Raw materials and mixture design, Constr. Build. Mater. 101 (2015) 741–751. L. Yang, X. Lin, H. Li, et al., A new constitutive model for steel fibre reinforced concrete subjected to dynamic loads, Compos. Struct. 221 (2019) 110849.1–110849.11. B.A. Graybeal, Characterization of the behavior of ultra-high performance concrete (Ph.D. thesis), 2005. Yang, 2019, Prediction of dynamic increase factor for steel fibre reinforced concrete using a hybrid artificial intelligence model, Eng. Struct., 189, 309, 10.1016/j.engstruct.2019.03.105 Ganesh, 2014, Effects of foundry sand as a fine aggregate in concrete production, Constr. Build. Mater., 70, 514, 10.1016/j.conbuildmat.2014.07.070 Osinubi, 2015, Cement modification of tropical black clay using iron ore tailings as admixture, Transp. Geotech., 5, 35, 10.1016/j.trgeo.2015.10.001 Yang, 2018, Effect of superplasticizer type and dosage on fluidity and strength behavior of cemented tailings backfill with different solid contents, Constr. Build. Mater., 187, 290, 10.1016/j.conbuildmat.2018.07.155 Deng, 2012, Comprehensive utilization status and existing problems of iron tailings in China, Mod. Min., 521, 1 Li, 2010, Innovative methodology for comprehensive utilization of iron ore tailings part 1. The recovery of iron from iron ore tailings using magnetic separation after magnetizing roasting, J. Hazard. Mater., 174, 71, 10.1016/j.jhazmat.2009.09.018 Jiang, 2019, Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills, Constr. Build. Mater., 218, 689, 10.1016/j.conbuildmat.2019.05.162 Jiang, 2019, An experimental study on compressive behaviour of cemented rockfill, Constr. Build. Mater., 147, 837, 10.1016/j.conbuildmat.2017.05.002 Xue, 2018, Compressive strength characteristics of cemented tailings backfill with alkali-activated slag, Appli. Sci., 8 Qiu, 2017, Strength characteristics and failure mechanism of cemented super-fine unclassified tailings backfill, Minerals, 10.3390/min7040058 Kesimal, 2005, Effect of properties of tailings and binder on the short-and long-term strength and stability of cemented paste backfill, Mater. Lett., 59, 3703, 10.1016/j.matlet.2005.06.042 Sirkeci, 2006, Recovery of Co, Ni, and Cu from the tailings of divrigi iron ore concentrator, Miner. Process. Extr. Metall. Rev., 27, 131, 10.1080/08827500600563343 Neville, 2011 Li, 2010, Innovative methodology for comprehensive utilization of iron ore tailings part 2. The residues after iron recovery from iron ore tailings to prepare cementitious material, J. Hazard. Mater., 174, 78, 10.1016/j.jhazmat.2009.09.019 Uchechukwu, 2014, Evaluation of the iron ore tailings from Itakpe in Nigeria as concrete material, Adv. Mater., 3, 27, 10.11648/j.am.20140304.12 Cheng, 2016, Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete, Constr. Build. Mater., 118, 164, 10.1016/j.conbuildmat.2016.05.020 Xiong, 2017, Use of grounded iron ore tailings (GIOTs) and BaCO3 to improve sulfate resistance of pastes, Constr. Build. Mater., 150, 66, 10.1016/j.conbuildmat.2017.05.209 Han, 2017, Early-age hydration characteristics of composite binder containing iron tailing powder, Powder. Technol., 315, 322, 10.1016/j.powtec.2017.04.022 Liu, 2011, Study on the sprayed concrete with iron tailings, Adv. Mater. Res., 347–353, 1939, 10.4028/www.scientific.net/AMR.347-353.1939 Huang, 2013, Development of green engineered cementitious composites using iron ore tailings as aggregates, Constr. Build. Mater., 44, 757, 10.1016/j.conbuildmat.2013.03.088 Zhao, 2014, Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete, Constr. Build. Mater., 50, 540, 10.1016/j.conbuildmat.2013.10.019 Ma, 2016, Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products, J. Clean. Prod., 127, 162, 10.1016/j.jclepro.2016.03.172 Shettima, 2016, Evaluation of iron ore tailing as replacement for fine aggregate in concrete, Constr. Build. Mater., 120, 72, 10.1016/j.conbuildmat.2016.05.095 Das, 2000, Exploitation of iron ore tailing for the development of ceramic tiles, Waste. Manage., 20, 725, 10.1016/S0956-053X(00)00034-9 Aruna, 2010, Studies on iron tailings towards usage for paving blocks manufacture, Int. J. Earth Sci. Eng., 3, 861 Yang, 2014, Characteristics of the fired bricks with low-silicon iron tailings, Constr. Build. Mater., 70, 36, 10.1016/j.conbuildmat.2014.07.075 Kuranchie, 2016, Utilisation of iron ore mine tailings for the production of geopolymer bricks, Int. J. Min. Reclam. Environ., 30, 92, 10.1080/17480930.2014.993834 Zhang, 2013, Preparation and properties of concrete containing iron tailings/manufactured sand as fine aggregate, Adv. Mater. Res., 838–841, 152, 10.4028/www.scientific.net/AMR.838-841.152 Shen, 2017, Mixing design and microstructure of ultra high strength concrete with manufactured sand, Constr. Build. Mater., 143, 312, 10.1016/j.conbuildmat.2017.03.092 Chinese National Standard. Common Portland Cement, GB 175-2007, Beijing, 2007. Huang, 2010, Grinding characteristic of Qidashan iron tailings, J. Univ. Sci. Technol. Beijing, 32, 1253 Van Tuan, 2011, Hydration and microstructure of ultra-high performance concrete incorporating rice husk ash, Cem. Concr. Res., 41, 1104, 10.1016/j.cemconres.2011.06.009 Huang, 2017, Influence of rice husk ash on strength and permeability of ultra-high performance concrete, Constr. Build. Mater., 149, 621, 10.1016/j.conbuildmat.2017.05.155 GB/T 17671-1999. Method of testing cements – determination of strength; 1999. [in Chinese]. BS 1881: Part 122. Testing concrete–Method for the determination of water absorption. 2011. ASTM Standard C1202, Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, 2009, p. 6. Rapid Determination of the Chloride Permeability of Concrete, American Association of States Highway and Transportation Officials, Standard Specifications - Part II Tests, Washington, D. C., 1990. Washburn, 1921, Note on a method of determining the distribution of pore sizes in porous materials, Proc. Natl. Acad. Sci. USA, 7, 115, 10.1073/pnas.7.4.115 D. Wang, C. Shi, Z. Wu, et al., A review on ultra-high performance concrete: part II. Hydration, microstructure and properties, Constr. Build. Mater. 96 (2015) 368–377. Zhang, 2020, Rheological and mechanical properties of cemented foam backfill: effect of mineral admixture type and dosage, Cem. Concr. Compos., 103689 Donza, 2002, High-strength concrete with different fine aggregate, Cem. Concr. Res., 32, 1755, 10.1016/S0008-8846(02)00860-8 Zain, 2000, Physical properties of high-performance concrete with admixtures to a medium temperature range 20℃ to 50℃, Cem. Concr. Res., 30, 1283, 10.1016/S0008-8846(00)00294-5 Yu, 2012, Relationships between compressive strength and microstructure in mortars with iron ore tailings as fine aggregate, Appl. Mech. Mater., 188, 211, 10.4028/www.scientific.net/AMM.188.211 Chan, 2013, Effects of fine recycled aggregate as sand replacement in concrete, HKIE Trans., 13, 2, 10.1080/1023697X.2006.10668055 Das, 2012, Implication of pore size distribution parameters on compressive strength, permeability and hydraulic diffusivity of concrete, Constr. Build. Mater., 28, 382, 10.1016/j.conbuildmat.2011.08.055 Poon, 2006, Compressive strength, chloride diffusivity and pore structure of high performance metakaolin and silica fume concrete, Constr. Build. Mater., 20, 858, 10.1016/j.conbuildmat.2005.07.001 Wang, 2017, Mix design and characteristics evaluation of an eco-friendly ultra-high performance concrete incorporating recycled coral based materials, J. Clean. Prod., 165, 70, 10.1016/j.jclepro.2017.07.096 Meng, 2016, Mechanical properties of ultra-high-performance concrete enhanced with graphite nanoplatelets and carbon nanofibers, Compos. Part B: Eng., 107, 113, 10.1016/j.compositesb.2016.09.069 Paiva, 2017, Microstructure and hardened state properties on pozzolan-containing concrete, Constr. Build. Mater., 140, 374, 10.1016/j.conbuildmat.2017.02.120 Scrivener, 2004, The interfacial transition zone (ITZ) between cement paste and aggregate in concrete, Interface. Sci., 12, 411, 10.1023/B:INTS.0000042339.92990.4c Scrivener, 1988, Quantitative characterization of the transition zone in high strength concretes, Adv. Cem. Res., 1, 230, 10.1680/adcr.1988.1.4.230 Scherer, 1999, Structure and properties of gels, Cem. Concr. Res., 29, 1149, 10.1016/S0008-8846(99)00003-4 Elrahman, 2014, Combined effect of fine fly ash and packing density on the properties of high performance concrete: an experimental approach, Constr. Build. Mater., 58, 225, 10.1016/j.conbuildmat.2014.02.024 Zhang, 2011, A new gap-graded particle size distribution and resulting consequences on properties of blended cement, Cem. Concr. Compos., 33, 543, 10.1016/j.cemconcomp.2011.02.013