Saturated flow boiling heat transfer and associated bubble characteristics of FC-72 on a heated micro-pin-finned silicon chip

Gersey, 1992, Effects of orientation on critical heat flux from chip arrays during flow boiling, Trans. ASME J. Electr. Pack., 114, 290, 10.1115/1.2905453 Willingham, 1992, Forced-convection boiling and critical heat flux from a linear array of discrete heat sources, Int. J. Heat Mass Transfer, 35, 2879, 10.1016/0017-9310(92)90308-F Heindel, 1992, Liquid immersion cooling of a longitudinal array of discrete heat sources in protruding substrates: II – forced convection boiling, Trans. ASME J. Electr. Pack., 114, 63, 10.1115/1.2905443 McGills, 1991, Geometry effects on critical heat flux for subcooled convective boiling from an array of heated elements, Trans. ASME J. Heat Transfer, 113, 463, 10.1115/1.2910584 Tso, 2000, Flow boiling critical heat flux of FC-72 from flush-mounted and protruded simulated chips in a vertical rectangular channel, Int. J. Multiphase Flow, 26, 351, 10.1016/S0301-9322(99)00023-3 Samant, 1989, Heat transfer from a small heated region to R-113 and FC-72, Trans. ASME J. Heat Transfer, 111, 1053, 10.1115/1.3250767 Ma, 2001, A study of bubble dynamics in reduced gravity forced-convection boiling, Int. J. Heat Mass Transfer, 44, 399, 10.1016/S0017-9310(00)00106-X Situ, 2004, Photographic study of bubble behavior in forced convection subcooled boiling, Int. J. Heat Mass Transfer, 47, 3659, 10.1016/j.ijheatmasstransfer.2004.04.005 Yin, 2000, Subcooled flow boiling heat transfer of R-134a and bubble characteristics in a horizontal annular duct, Int. J. Heat Mass Transfer, 43, 1885, 10.1016/S0017-9310(99)00278-1 C. Bang, Won-Pil Baek, S.H. Chang, A digital photographic study on nucleate boiling in subcooled flow for water and refrigerant 134A fluids, in: Proceedings of ICONE10 10th International Conference on Nuclear Engineering Arlington, VA, April 14–18, 2002. Chang, 2002, A photographic study on the near-wall bubble behavier in subcooled flow boiling, Int. J. Therm. Sci., 41, 609, 10.1016/S1290-0729(02)01354-6 Bang, 2004, Visualization of the subcooled flow boiling of R-134a in a vertical rectangular channel with an electrically heated wall, Int. J. Heat Mass Transfer, 47, 4349, 10.1016/j.ijheatmasstransfer.2004.04.030 Maurus, 2002, Study of the bubble characteristics and the local void fraction in subcooled flow boiling using digital imaging and analyzing techniques, Exp. Therm. Fluid Sci., 26, 147, 10.1016/S0894-1777(02)00121-8 Maurus, 2004, Automated high-speed video analysis of the bubble dynamics in subcooled flow boiling, Int. J. Heat Fluid Flow, 25, 149, 10.1016/j.ijheatfluidflow.2003.11.007 Thorncroft, 1998, An experimental investigation of bubble growth and detachment in vertical upflow and downflow boiling, Int. J. Heat Mass Transfer, 41, 3857, 10.1016/S0017-9310(98)00092-1 Maddox, 1989, Single- and two-phase convective heat transfer from smooth and enhanced microelectronic heat sources in a rectangular channel, Trans. ASME J. Heat Transfer, 111, 1045, 10.1115/1.3250766 Mudawar, 1990, Enhancement of critical heat flux from high power microelectronic heat sources in a flow channel, Trans. ASME J. Electr. Pack., 112, 241, 10.1115/1.2904373 Honda, 2002, Enhanced boiling of FC-72 on silicon chips with micro-pin-fins and submicron-scale roughness, Trans. ASME J. Heat Transfer, 124, 383, 10.1115/1.1447937 Honda, 2003, Effects of fin geometry on boiling heat transfer from silicon chips with micro-pin-fins immersed in FC-72, Int. J. Heat Mass Transfer, 46, 4059, 10.1016/S0017-9310(03)00226-6 Honda, 2004, Enhanced boiling heat transfer from electronic components by use of surface microstructures, Exp. Therm. Fluid Sci., 28, 159, 10.1016/S0894-1777(03)00035-9 Ramaswamy, 2003, Effects of varying geometrical parameters on boiling from microfabricated enhanced structures, Trans. ASME J. Heat Transfer, 125, 103, 10.1115/1.1513575 Rainey, 2003, Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous, square pin-finned surface in FC-72, Int. J. Heat Mass Transfer, 46, 23, 10.1016/S0017-9310(02)00257-0 Kline, 1953, Describing uncertainties in single-sample experiments, Mech. Eng., 75, 3