Machinability of titanium alloys (Ti6Al4V and Ti555.3)

Arrazola, 2005, Serrated chip prediction in numerical cutting models, 115 Boyer, 2004, The use of beta titanium alloys in the aerospace industry, Journal of Materials Engineering and Performance, 56, 681 Dearnley, 1986, Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for a Machining Titanium Alloy IMI 318, Materials Science and Technology, 2, 47, 10.1179/mst.1986.2.1.47 Delfosse, J., 2005, Forgeage beta du Ti17 Propriété en fatigue. PhD. Thesis, Ecole Centrale Paris, France. Fanning, 2005, Properties of TIMETAL 555 (Ti–5.5Al–5Mo–5V–3Cr), Journal of Materials Engineering and Performance, 14, 788, 10.1361/105994905X75628 Hartung, 1982, Tool wear in Titanium machining, Annals of CIRP, 32, 75, 10.1016/S0007-8506(07)63272-7 Ikuta, 2002, Consideration of the adhesion mechanism of Ti alloys using cemented carbide during the cutting process, Journal of Materials. Processing, 127, 251, 10.1016/S0924-0136(02)00152-8 Kahles, 1985, Machining of titanium alloys, Journal of Metals, 7 Komanduri, 1982, Some clarifications on the mechanics of the chip formation when machining titanium alloys, Wear, 76, 12 Machado, 1994, The effects of a high pressure coolant jet on machining, Journal of Engineering Manufacture, 208, 29, 10.1243/PIME_PROC_1994_208_057_02 Min, 1988, Diffusion wear in milling titanium alloys, Materials and Science Technology, 4, 548, 10.1179/mst.1988.4.6.548 Nabhani, 2001, Wear mechanism of ultra-hard cutting tool materials, Journal of Materials Processing Technology, 115, 402, 10.1016/S0924-0136(01)00851-2 Yang, 1999, Machining titanium and its alloys, Machining Science and Technology, 3, 107, 10.1080/10940349908945686