Evolution of Grain Boundary Precipitates in Al 7075 Upon Aging and Correlation with Stress Corrosion Cracking Behavior

J.P. Immarigeon, R.T. Holtz, A.K. Koul, L.Zhao, W. Wallace, and J.C. Beddoes: Mater. Charact., 1995, vol. 35, pp. 41–67.

S. Russo, P.K. Sharp, R. Dhamari, T.B. Mills, B.R.W. Hinton, G. Clark, and K. Shankar: Fatigue Fract. Eng. Mater. Struct., 2009, vol. 32, pp. 464–72.

M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–51.

S. Verma and C.J. Jaynes: J. Adv. Mater., 1999, vol. 31, pp. 34–40.

S.P. Knight, N. Birbilis, B.C. Muddle, A.R. Trueman, and S.P. Lynch: Corros. Sci., 2010, vol. 52, pp. 4073–80.

S.P. Lynch, S.P. Knight, N. Birbilis, and B.C. Muddle: in Effects of Hydrogen on Materials, B. Somerday, P. Sofronis, and R. Jones, eds., ASM International, Metals Park, OH, 2009, pp. 243–50.

N.J.H. Holroyd: in Environment-Induced Cracking of High-Strength Aluminum Alloys, Proceedings of Environment-Induced Cracking of Metals, 1988, R.P. Gangloff and M.B. Ives, eds., NACE, Houston, 1990, pp. 311–45.

A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 405–14.

P.K. Poulose, J.R. Morral, and A.J. McEvily: Metall. Trans., 1974, vol. 5, pp. 1393–1400.

S.P. Lynch: in Stress-Corrosion Cracking: Theory and Practice, V.S. Raja and T. Shoji, eds., Woodhead Publishing, Kirjastus, 2011, pp. 3–89.

S.P. Lynch: in Stress-Corrosion Cracking: Theory and Practice, V.S. Raja and T. Shoji, eds., Woodhead Publishing, Kirjastus, 2011, pp. 90–130.

S.P. Lynch: in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, R.H. Jones, ed., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2003, pp. 449–66.

F. Andreatta, H. Terryn, and J.H.W. de Wit: Electrochim. Acta, 2004, vol. 49, pp. 2851–62.

F. Viana, A.M.P. Pinto, H.M.C. Santos, and A.B. Lopes: J. Mater. Process. Technol. 1999, vols. 92–93, pp. 54–59.

J.M. Badia, J.M. Antoranz, P. Tarin, C.L. Del Castillo, A.G. Simon, and N.M. Pris: Boletin De La Sociedada Espanola De Ceramica Y Vidrio, 2004, vol. 43, pp. 224–28.

J.F. Li, Z.W. Peng, C.X. Li, Z.Q. Jia, W.J. Chen, and Z.Q. Zheng: Trans. Nonferr. Metal. Soc. China, 2008, vol. 18, pp. 755–62.

J.K. Park: Mater. Sci. Eng. A, 1988, vol. A103, pp. 223–31.

Y. Reda, R. Abdel-Karim, and I. Elmahallawi: Mater. Sci. Eng. A, 2008, vol. 485, pp. 468–75.

B. Sarkar, M. Marek, and E.A. Starke: Metall. Trans. A, 1981, vol. 12A, pp. 1939–43.

S.P. Knight: Ph.D. Thesis, 2008, Monash University, Australia.

P. Doig, P.E.J. Flewitt, and J.W. Edington: Corrosion, 1977, vol. 33 (6), pp. 217–21.

T. Ramgopal, P.I. Gouma, and G.S. Frankel: Corrosion, 2002, vol. 58 (8), pp. 687–97.

Q. Meng and G.S. Frankel: J. Electrochem. Soc., 2004, vol. 151 (5), pp. B271–B283.

T. Malis and M.C. Chaturvedi: J. Mater. Sci., 1982, vol. 17, pp. 1479–86.

S.P. Lynch, B.C. Muddle, and T. Pasang: Acta Metall., 2001, vol. 49, pp. 2863–74.

M.P. Seah: Acta Metall., 1980, vol. 28, pp. 955–62.

B.V. Narasimha Rao: Metall. Trans. A, 1981, vol. 12A, pp. 1356–59.

K. Park and A.J. Ardell: Acta Metall. Mater., 1991, vol. 39, pp. 591–98.

W. Hepples, M.R. Jarrett, J.S. Crompton, and N.J.H. Holroyd: The Influence of Microstructure on the Stress Corrosion Cracking and Exfoliation of Commercial Al-Zn-Mg-Cu Alloys, in Proceedings of Environment-Induced Cracking of Metals, 1988, R.P. Gangloff and M.B. Ives, eds., NACE, Houston, 1990, pp. 383–87.

G.M. Scamans, N.J.H. Holroyd, and C.D.S. Tuck: Corros. Sci., 1987, vol. 4, pp. 329–47.

N.D. Browning, M.F. Chisholm, and S.J. Pennycook: Nature, 1993, vol. 366, pp. 143–46.

A. Uguz and J.W. Martin: Mater. Charact., 1991, vol. 27, pp. 147–56.

J.K. Park: Mater. Sci. Eng., 1988, vol. 103, pp. 223–31.

T.S. Srivatsan, S. Sriram, D. Veeraraghavan, and V.K. Vasudevan: J. Mater. Sci., 1997, vol. 32, pp. 2883–94.

R. Ciach, J. Dutkiewicz, R. Kroggel, H. Loffler, and G. Wendrock: Kristall und Technik, 1975, vol. 10, pp. 123–34.

G.W. Lorimer: Sequences of Intergranular Nucleation and Precipitation at Grain and Subgrain Boundaries, in Proc. Int. Conf. on Solid-Solid Phase Transformations, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., The Metallurgical Society of AIME, New York, 1982, pp. 616–35.

S.K. Maloney, K. Hono, I.J. Polmear, and S.P. Ringer: Scripta Mater., 1999, vol. 41, pp. 1031–38.

X.J. Jiang, B. Noble, V. Hansen, and J. Tafto: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1063–73.

L.K. Berg, J. Gjønnes, V. Hansen, X.Z. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, and L.R. Wallenberg: Acta Mater., 2001, vol. 49, pp. 3443–51.

X.J. Jiang, B. Noble, B. Holme, G. Waterloo, and J. Tafto: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 339–48.

L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworths, London, 1976, p. 971.

J.K. Park and A.J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957–65.

S.P. Ringer and K. Hono: Mater. Charact., 2000, vol. 44, pp. 101–31.

J.W. Cahn and G. Kalonji: in Symmetry in Solid State Transformation Morphologies, Proc. Int. Conf. on Solid-Solid Phase Transformations, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., The Metallurgical Society of AIME, New York, 1982, pp. 3–14.

H.B. Aaron and H.I. Aaronson: Acta Metall., 1968, vol. 16, p. 789.

T. Ramgopal, P. Schmutz, and G.S. Frankel: J. Electrochem. Soc., 2001, vol. 148, pp. B348–B356.