The biomechanical effect of artificial and human bone density on stopping and stripping torque during screw insertion

Ahmadi, 2013, The Biomechanics of Three Different Fracture Fixation Implants for Distal Femur Repair in the Presence of a Tumor-like Defect, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 227, 78, 10.1177/0954411912454368 Alho, 1997, Concurrent ipsilateral fractures of the hip and shaft of the femur: a systematic review of 722 cases, Annales Chirurgiae et Gynaecologiae, 86, 326 Althausen, 2003, Operative stabilization of supracondylar femur fractures above total knee arthroplasty: a comparison of four treatment methods, Journal of Arthroplasty, 18, 834, 10.1016/S0883-5403(03)00339-5 Ansell, 1968, A study of some factors which affect the strength of screws and their insertion and holding power in bone, Journal of Biomechanics, 1, 279, 10.1016/0021-9290(68)90023-7 Auerbach, 2006, Limb bone bilateral asymmetry: variability and commonality among modern humans, Journal of Human Evolution, 50, 203, 10.1016/j.jhevol.2005.09.004 Bahr, 1992, Comparison of torque measurements between cortical screws and emergency replacement screws in the cadaver mandible, Journal of Oral and Maxillofacial Surgery, 50, 46, 10.1016/0278-2391(92)90195-6 Banse, 1996, Comparative left–right mechanical testing of cancellous bone from normal femoral heads, Journal of Biomechanics, 29, 1247, 10.1016/0021-9290(96)00061-9 Bours, 2011, Contributors to secondary osteoporosis and metabolic bone diseases in patients presenting with a clinical fracture, Journal of Clinical Endocrinology and Metabolism, 96, 1360, 10.1210/jc.2010-2135 Boyle, 1993, Torque and pullout analysis of six currently available self-tapping and emergency screws, Journal of Oral and Maxillofacial Surgery, 51, 45, 10.1016/S0278-2391(10)80389-1 Boyle, 1993, Evaluation of emergency screws in nonstripped pilot holes in bone, International Journal of Adult Orthodontics and Orthognathic Surgery, 8, 211 Boyle, 1993, Comparison between uniaxial pull-out tests and torque measurement of 2.0-mm self-tapping screws, International Journal of Adult Orthodontics and Orthognathic Surgery, 8, 129 2001 Chapman, 1996, Factors affecting the pullout strength of cancellous bone screws, Journal of Biomechanical Engineering, 118, 391, 10.1115/1.2796022 Cheal, 1992, Role of loads and prosthesis material properties on the mechanics of the proximal femur after total hip arthroplasty, Journal of Orthopaedic Research, 10, 405, 10.1002/jor.1100100314 Cheung, 2004, Finite element analysis of a femoral retrograde intramedullary nail subject to gait loading, Medical Engineering & Physics, 26, 93, 10.1016/j.medengphy.2003.10.006 Cleek, 2007, Effect of screw torque level on cortical bone pullout strength, Journal of Orthopaedic Trauma, 21, 117, 10.1097/BOT.0b013e318030261e Cordey, 1980, Human torque control in the use of bone screws, 235 Cordey, 1980, Stripping of the bone screws at insertion. The relation of torque and angular displacement in predicting admissible torque values, Acta Orthopaedica Belgica, 46, 816 Crookshank, 2012, Biomechanical measurements of axial crush injury to the distal condyles of human and synthetic femurs, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 226, 320, 10.1177/0954411912438038 Cusick, 2000, Construct stiffness of different fixation methods for supracondylar femoral fractures above total knee prostheses, American Journal of Orthopedics, 29, 695 Daubs, 2007, Evaluation of compression generated by self compressing orthofix bone pins and lag screws in simulated lateral humeral condylar fractures, Veterinary and Comparative Orthopaedics and Traumatology, 20, 175, 10.1160/VCOT-06-07-0057 Dennis, 2000, Fixation of periprosthetic femoral shaft fractures occurring at the tip of the stem: a biomechanical study of 5 techniques, Journal of Arthroplasty, 15, 523, 10.1054/arth.2000.4339 Ebrahimi, 2012, Biomechanical properties of an intact, injured, repaired, and healed femur: an experimental and computational study, Journal of the Mechanical Behavior of Biomedical Materials, 16, 121, 10.1016/j.jmbbm.2012.09.005 Edwards, 2005, Stripping torque as a predictor of successful internal fracture fixation, ANZ Journal of Surgery, 75, 1096, 10.1111/j.1445-2197.2005.03497.x Emerson, 1992, Cortical strut allografts in the reconstruction of the femur in revision total hip arthroplasty. A basic science and clinical study, Clinical Orthopaedics and Related Research, 285, 35, 10.1097/00003086-199212000-00007 Fulkerson, E., Egol, K., Preston, C., Iesaka, K., Kummer, F., Koval, K., 2004, Fixation of periprothetic femoral shaft fractures: a biomechanical comparison of locked plating and conventional cable plates (Ogden Construct). In: Proceedings of the Orthopedic Trauma Association 20th Annual Meeting, Florida, USA. Fulkerson, 2006, Fixation of periprosthetic femoral shaft fractures associated with cemented femoral stems: a biomechanical comparison of locked plating and conventional cable plates, Journal of Orthopaedic Trauma, 20, 89, 10.1097/01.bot.0000199119.38359.96 Heiner, 2001, Structural properties of a new design of composite replicate femurs and tibias, Journal of Biomechanics, 34, 773, 10.1016/S0021-9290(01)00015-X Heiner, A.D., Brown, T.D., 2003. structural properties of an improved redesign of composite replicate femurs and tibias. In: Proceedings of the Transactions 29th Annual Meeting of the Society for Biomaterials, 26, p. 702. Hsu, 2005, Increase of pullout strength of spinal pedicle screws with conical core: biomechanical tests and finite element analyses,, Journal of Orthopaedic Research, 23, 788, 10.1016/j.orthres.2004.11.002 Huiskes, 2005, Biomechanics of bone, 123 Kelley, 1994, Periprosthetic femoral fractures, ournal of the American Academy of Orthopaedic Surgeons, 2, 164, 10.5435/00124635-199405000-00005 Koo, 2008, Interobserver reliability of the young-burgess and tile classification systems for fractures of the pelvic ring, Journal of Orthopedic Trauma, 22, 379, 10.1097/BOT.0b013e31817440cf Law, 1993, Caudo-cephalad loading of pedicle screws:mechanisms of loosening and methods of augmentation, Spine, 18, 2438, 10.1097/00007632-199312000-00012 Lawson, 2001, Effect of insertion torque on bone screw pullout strength, Orthopedics, 24, 451, 10.3928/0147-7447-20010501-12 Lin, 2002, Bending strength and holding power of a prototype tibial locking screw, Clinical Orthopaedics and Related Research, 403, 232, 10.1097/00003086-200210000-00034 Lin, 2001, Bending strength and holding power of tibial locking screws, Clinical Orthopaedics and Related Research, 385, 199, 10.1097/00003086-200104000-00031 Martinet, 2000, The epidemiology of fractures of the distal femur, Injury, 31, C62, 10.1016/S0020-1383(00)80034-0 Merk, 2001, A fatigue life analysis of small fragment screws, Journal of Orthopaedic Trauma, 15, 494, 10.1097/00005131-200109000-00006 Nicayenzi, 2012, Biomechanical measurements of cortical screw stripping torque in human versus artificial femurs, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 226, 645, 10.1177/0954411912450998 Nicayenzi, 2011, The biomechanical effect of changes in cancellous bone density on synthetic femur behaviour, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 225, 1050, 10.1177/0954411911420004 Ogden, 1978, Fractures beneath hip prostheses: a special indication for parham bands and plating, Orthopedic Transactions, 2, 70 Olsen, 2011, A biomechanical comparison of epiphyseal versus metaphyseal fixed bone-conserving hip arthroplasty, ournal of Bone & Joint Surgery American, 93, 122, 10.2106/JBJS.J.01709 Ricci, 2010, A comparison of screw insertion torque and pullout strength, Journal of Orthopaedic Trauma, 24, 374, 10.1097/BOT.0b013e3181c4a655 Roe, 1988, Biomechanical properties of canine cortical bone allografts: effects of preparation and storage, American Journal of Veterinary Research, 49, 873 Sawbones. Vashon, WA, USA. 〈http://www.sawbones.com/catalog/pdf/us_catalog.pdf〉. Simonian, 1994, Effect of sterilization and storage treatments on screw pullout strength in human allograft bone, Clinical Orthopaedics and Related Research, 302, 290, 10.1097/00003086-199405000-00044 Tencer, 1994 Thomas, 2008, Automated surgical screwdriver: automated screw placement, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 222, 817, 10.1243/09544119JEIM375 2008 Zdero, 2011, Biomechanical measurements of torsion-tension coupling in human cadaveric femurs, Journal of Biomechanical Engineering, 133, 10.1115/1.4002937 Zdero, 2010, A Biomechanical comparison of two triple-screw methods for femoral neck fracture fixation in a synthetic bone model, Journal of Trauma, 69, 1537, 10.1097/TA.0b013e3181efb1d1 Zdero., 2009, Cortical screw purchase in synthetic and human femurs, Journal of Biomechanical Engineering, 131, 094503-1, 10.1115/1.3194755 Zdero, 2008, Cancellous bone screw purchase: a comparison of synthetic femurs, human femurs, and finite element analysis, Proceedings of the Institution of Mechanical Engineers (Part H): Journal of Engineering in Medicine, 222, 1175, 10.1243/09544119JEIM409 Zdero, 2008, Biomechanical evaluation of periprosthetic femoral fracture fixation, Journal of Bone & Joint Surgery American, 90, 1068, 10.2106/JBJS.F.01561