Stormwater solids removal characteristics of a catch basin insert using geotextile

Alam, 2017, Characterising stormwater gross pollutants captured in catch basin inserts, Sci. Total Environ., 586, 76, 10.1016/j.scitotenv.2017.01.210 Alexander, 2001, Geotextile specifications made simple ANZECC, 2000, 1 AWWA (American Water Works Association), 1999 Aydilek, 2002, Digital image analysis to determine pore opening size distribution of nonwoven geotextiles, J. Comput. Civ. Eng., 16, 280, 10.1061/(ASCE)0887-3801(2002)16:4(280) BoM (Bureau of Meteorology) Bouazza, 2006, Water retention of nonwoven polyester geotextiles, Polym. Test., 25, 1038, 10.1016/j.polymertesting.2006.07.002 Brodie, 2009, Suspended particle characteristics in storm runoff from urban impervious surfaces in Toowoomba, Australia, Urban Water J., 6, 137, 10.1080/15730620802541607 Charters, 2015, Particle size distribution variance in untreated urban runoff and its implication on treatment selection, Water Res., 85, 337, 10.1016/j.watres.2015.08.029 CIWMB (California Integrated Waste Management Board), 2005, Laboratory evaluation of four storm drain inlet filters for oil removal Clark, 2009, Solids removal in storm-water filters modeled using a power equation, J. Environ. Eng., 135, 896, 10.1061/(ASCE)EE.1943-7870.0000068 Clark, 1992, Contact filtration: particle size and ripening, J. Am. Water Works Assoc., 84, 61, 10.1002/j.1551-8833.1992.tb05903.x Coduto, 2011 Eaton, 1995 Edwards, 2004, Evaluation of storm water catch basin inserts for transportation facilities, 123 Flint, 2007, Pollutant mass flushing characteristics of highway storm water runoff from an ultraurban area, J. Environ. Eng., 616, 10.1061/(ASCE)0733-9372(2007)133:6(616) Franks, 2012, Geosynthetic filters for water quality improvement of urban storm water runoff, J. Environ. Eng., 138, 1018, 10.1061/(ASCE)EE.1943-7870.0000565 GeoSyntec Consultants and University of California (UCLA), 2005 Ghani, 2011, Flow pattern and hydraulic performance of the REDAC gross pollutant trap, Flow Meas. Instrum., 22, 215, 10.1016/j.flowmeasinst.2011.02.004 Gironas, 2008, Experimental analysis and modeling of a stormwater perlite filter, Water Environ. Res., 80, 524, 10.2175/193864708X267432 Hallberg, 2008, Suspended solids concentration in highway runoff during summer conditions, Pol. J. Environ. Stud., 17, 237 Hatt, 2007, Treatment performance of gravel filter media: implications for design and application of stormwater infiltration systems, Water Res., 41, 2513, 10.1016/j.watres.2007.03.014 Hsieh, 2005, Evaluation and optimization of bioretention media for treatment of urban storm water runoff, J. Environ. Eng., 131, 521, 10.1061/(ASCE)0733-9372(2005)131:11(1521) ICBIC (Interagency Catch Basin Insert Committee), 1995 Kim, 2008, Event-based size distributions of particulate matter trans ported during urban rainfall-runoff events, Water Res., 42, 2756, 10.1016/j.watres.2008.02.005 Korkut, 2006, Wastewater treatment with biomass attached to porous geotextile baffles, J. Environ. Eng., 132, 284, 10.1061/(ASCE)0733-9372(2006)132:2(284) Kostarelos Kutay, 2004, Retention performance of geotextile containers confining geomaterials, Geosynth. Int., 11, 100, 10.1680/gein.2004.11.2.100 Lamy, 2013, Effect of a nonwoven geotextile on solute and colloid transport in porous media under both saturated and unsaturated conditions, Geotext. Geomembr., 36, 55, 10.1016/j.geotexmem.2012.10.009 Lau, 2001, Catch basin inserts to reduce pollution from stormwater, Water Sci. Technol., 44, 23, 10.2166/wst.2001.0381 Leverenz, 2000, Evaluation of Textile Filters for the Treatment of Septic Tank Effluent Li, 2008, Urban particle capture in bioretention media. I: laboratory and field studies, J. Environ. Eng., 409, 10.1061/(ASCE)0733-9372(2008)134:6(409) Mao, 2006, Modelling the filtration process with a flat-type fabric filter, Adv. Powder Technol., 17, 237, 10.1163/156855206777213357 Morgan, 2005, An evaluation of the urban stormwater pollutant removal efficiency of catch basin inserts, Water Environ. Res., 77, 500, 10.2175/106143005X67412 Muthukumaran, 2006, Laboratory studies on geotextile filters as used in geotextile tube dewatering, Geotext. Geomembr., 24, 210, 10.1016/j.geotexmem.2006.03.002 Nagahara, 2004, FEM analysis of high airport embankment with horizontal drains, Geotext. Geomembr., 22, 49, 10.1016/S0266-1144(03)00051-7 Nordqvist, 2014, Measuring solids concentrations in urban stormwater and snowmelt: a new operational procedure, Environ. Sci.: Processes Impacts, 16, 2172 Palmeira, 2008, A study on biological clogging of nonwoven geotextiles under leachate flow, Geotext. Geomembr., 26, 205, 10.1016/j.geotexmem.2007.10.006 Rees, 2006, 105 Rothleitner Sansalone, 2005, Event-based storm water quality and quantity loadings from elevated urban infrastructure affected by transportation, Water Environ. Res., 77, 348, 10.1002/j.1554-7531.2005.tb00294.x Selbig, 2015, Characterizing the distribution of particles in urban stormwater: advancements through improved sampling technology, Urban Water J., 12, 111, 10.1080/1573062X.2013.820334 Siriwardene, 2007, Clogging of stormwater gravel infiltration systems and filters: insights from a laboratory study, Water Res., 41, 1433, 10.1016/j.watres.2006.12.040 Standards Australia Taebi, 2004, First flush pollution load of urban stormwater runoff, J. Environ. Eng. Sci., 3, 301, 10.1139/s04-018 Tufenkji, 2004, Correlation equation for predicting single-collector efficiency in physicochemical filtration in saturated porous media, Environ. Sci. Technol., 38, 529, 10.1021/es034049r Urbonas, 1999, Design of a sand filter for stormwater quality enhancement, Water Environ. Res., 71, 102, 10.2175/106143099X121625 Vaitkus, 2007, Evaluation of geotextiles separation performance on the impact of transport loads: experimental research-stage I, Balt. J. Road Bridge Eng., 2, 45 Wong, 2006 Zhao, 2013, Understanding the relationship between heavy metals in road-deposited sediments and washoff particles in urban stormwater using simulated rain fall, J. Hazard. Mater., 246, 267, 10.1016/j.jhazmat.2012.12.035