Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling

Aveston, 1971, Single and multiple fracture, 15 Curtin, 1998, Tensile strength of fiber-reinforced composites: II. Application to polymer matrix composites, J Compos Mater, 32, 2060, 10.1177/002199839803202204 González, 2001, Micromechanical modelling of deformation and failure in Ti–6Al–4V/SiC composites, Acta Mater, 49, 3505, 10.1016/S1359-6454(01)00246-4 Argon, 1972, Fracture of composites, vol. 1, 79 Budiansky, 1993, Compressive failure of fiber composites, J Mech Phys Solids, 41, 183, 10.1016/0022-5096(93)90068-Q Vogler, 2000, Composite failure under combined compression and shear, Int J Solids Struct, 37, 1765, 10.1016/S0020-7683(98)00323-0 Michel, 1999, Effective properties of composite materials with periodic microstructure: a computational approach, Comput Meth Appl Mech Eng, 172, 109, 10.1016/S0045-7825(98)00227-8 Lusti, 2002, Direct numerical predictions for the elastic and thermoelastic properties of short fibre composites, Compos Sci Technol, 62, 1927, 10.1016/S0266-3538(02)00106-9 Segurado, 2002, A numerical approximation to the elastic properties of sphere-reinforced composites, J Mech Phys Solids, 50, 2107, 10.1016/S0022-5096(02)00021-2 González, 2004, Numerical simulation of elasto-plastic deformation of composites: evolution of stress microfields and implications for homogenization models, J Mech Phys Solids, 52, 1573, 10.1016/j.jmps.2004.01.002 Chawla, 2006, Three-dimensional visualization and microstructure-based modeling of deformation in particle-reinforced composites, Acta Mater, 54, 1541, 10.1016/j.actamat.2005.11.027 Segurado, 2003, A numerical investigation of the effect of particle clustering on the mechanical properties of composites, Acta Mater, 51, 2355, 10.1016/S1359-6454(03)00043-0 Segurado, 2006, Computational micromechanics of composites: the effect of particle spatial distribution, Mech Mater, 38, 873, 10.1016/j.mechmat.2005.06.026 Böhm, 2004, Multi-inclusion unit cell studies of reinforcement stresses and particle failure in discontinuously reinforced ductile matrix composites, Comput Model Eng Sci, 5, 5 LLorca, 2004, Three-dimensional multiparticle cell simulations of deformation and damage in sphere-reinforced composites, Mater Sci Eng A, 365, 267, 10.1016/j.msea.2003.09.035 Youssef, 2005, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Mater, 53, 719, 10.1016/j.actamat.2004.10.024 Borbély, 2006, Estimation of the effective properties of particle-reinforced metalmatrix composites from microtomographic reconstructions, Acta Mater, 54, 2735, 10.1016/j.actamat.2006.02.012 González, 2006, Multiscale modeling of fracture in fiber-reinforced composites, Acta Mater, 54, 4171, 10.1016/j.actamat.2006.05.007 González, 2007, Virtual fracture testing of fiber-reinforced composites: a computational micromechanics approach, Eng Fract Mech, 74, 1126, 10.1016/j.engfracmech.2006.12.013 Collings, 1974, Transverse compressive behaviour of unidirectional carbon fibre reinforced plastics, Composites, 5, 108, 10.1016/0010-4361(74)90548-5 Pinho, 2006, Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre-kinking. Part I: development, Compos: Part A, 37, 63, 10.1016/j.compositesa.2005.04.016 Huang, 2002, Mechanical properties of Zylon/epoxy composite, Compos: Part B, 33, 109 Puck, 2002, Failure analysis of frp laminates by means of physically based phenomenological models, Compos Sci Technol, 62, 1633, 10.1016/S0266-3538(01)00208-1 Aragonés D. Fracture micromechanisms in C/epoxy composites under transverse compression, Master thesis, Universidad Politécnica de Madrid, 2007. Vogler, 1999, Inelastic behavior of an AS4/PEEK composite under combined transverse compression and shear. Part I: Experiments, Int J Plast, 15, 783, 10.1016/S0749-6419(99)00011-X Hsiao, 1998, Strain rate behavior of composite materials, Compos: Part B, 29, 521 Kinloch, 1983 Hashin, 1980, Failure criteria for unidirectional fiber composites, J Appl Mech, 47, 329, 10.1115/1.3153664 Segurado, 2004, A new three-dimensional interface finite element to simulate fracture in composites, Int J Solids Struct, 41, 2977, 10.1016/j.ijsolstr.2004.01.007 Segurado, 2005, A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites, Acta Mater, 53, 4931, 10.1016/j.actamat.2005.07.013 Hashagen, 2000, Numerical assessment of delamination in fibre metal laminates, Comput Meth Appl Mech Eng, 185, 141, 10.1016/S0045-7825(99)00256-X Ghosh, 2000, Interfacial debonding analysis in multiple fiber reinforced composites, Mech Mater, 32, 561, 10.1016/S0167-6636(00)00030-2 Brockenbrough, 1991, Deformation of metal–matrix composites with continuous fibers: geometrical effects of fiber distribution and shape, Acta Metall Mater, 39, 735, 10.1016/0956-7151(91)90274-5 Hine, 2002, Numerical simulation of the effects of volume fraction, aspect ratio and fibre length distribution on the elastic and thermoelastic properties of short fibre composites, Compos Sci Technol, 62, 1445, 10.1016/S0266-3538(02)00089-1 Abaqus, Users’ Manual, ABAQUS Inc; 2006. Suquet P. Effective properties of nonlinear composites. In: Continuum micromechanics. CISM Course and Lecture Notes; 1997, p. 197–264. Hazanov, 1994, Order relationships for boundary condition effects in heterogeneous bodies smaller than the representative volume, J Mech Phys Solids, 42, 1995, 10.1016/0022-5096(94)90022-1 Soden, 1998, Lamina properties, lay-up configurations and loading conditions for a range of fibre-reinforced composite laminates, Compos Sci Technol, 58, 1011, 10.1016/S0266-3538(98)00078-5 Abaqus, Theory manual, HKS Inc; 1998. Menetrey, 1995, Triaxial failure criterion for concrete and its generalization, ACI Struct J, 92, 311 Zhou, 2001, Interfacial properties of polymer composites measured by push-out and fragmentation tests, Compos: Part A, 32, 1543, 10.1016/S1359-835X(01)00018-5 Khisaeva, 2006, On the size of RVE in finite elasticity of random composites, J Elast, 85, 153, 10.1007/s10659-006-9076-y Pitkethly, 1993, A round robin programme on interfacial test methods, Compos Sci Technol, 48, 205, 10.1016/0266-3538(93)90138-7 Benzarti, 2001, Transverse properties of unidirectional glass/epoxy composites: influence of fibre surface treatments, Compos: Part A, 32, 197, 10.1016/S1359-835X(00)00136-6