Stabilized landfill leachate treatment by sugarcane bagasse derived activated carbon for removal of color, COD and NH3-N – Optimization of preparation conditions by RSM

Journal of Environmental Chemical Engineering - Tập 3 - Trang 1287-1294 - 2015
Nurshazwani Bt. Azmi1, Mohammed J.K. Bashir1, Sumathi Sethupathi1, Lim Jun Wei2, Ng Choon Aun1
1Department of Environmental Engineering, Faculty of Engineering and Green Technology (FEGT), University Tunku Abdul Rahman, Kampar, Perak 31900, Malaysia
2Faculty of Agro Based-Industry, Universiti Malaysia Kelantan, Jeli, Kelantan 17600, Malaysia

Tài liệu tham khảo

Manaf, 2009, Municipal solid waste management in Malaysia: practices and challenges, Waste Manage., 29, 2902, 10.1016/j.wasman.2008.07.015 Bashir, 2010, Application of response surface methodology (RSM) for optimization of ammoniacal nitrogen removal from semi-aerobic landfill leachate using ion-exchange resin, Desalination, 254, 154, 10.1016/j.desal.2009.12.002 Sandip, 2012, Enhancement of methane production and bio-stabilisation of municipal solid waste in anaerobic bioreactor landfill, Bioresour. Technol., 110, 10, 10.1016/j.biortech.2011.12.027 Othman, 2010, The effectiveness of silica sand in semi-aerobic landfill leachate treatment, Water, 2, 904, 10.3390/w2040904 Peng, 2013, Perspectives on technology for landfill leachate treatment, Arab. J. Chem., 10.1016/j.arabjc.2013.09.031 Bashir, 2013, An overview of electro-oxidation process performing stabilized landfill leachate treatment, Desalin. Water Treat., 51, 2170, 10.1080/19443994.2012.734698 Bashir, 2012, Color and oxygen demand removal from mature semi-aerobic landfill leachate using anion-exchange resin: an equilibrium and kinetic study, Environ. Eng. Sci., 9, 297, 10.1089/ees.2010.0187 Halim, 2012, Semi-aerobic landfill leachate treatment using carbon minerals composite adsorbent, Environ. Eng. Sci., 29, 306, 10.1089/ees.2010.0204 Bhatnagar, 2013, An overview of the modification methods of activated carbon for water treatment, Chem. Eng. J., 219, 499, 10.1016/j.cej.2012.12.038 Foo, 2010, Insights into the modeling of adsorption isotherm systems, Chem. Eng. J., 156, 2, 10.1016/j.cej.2009.09.013 Mohan, 2006, Activated carbon and low cost adsorbents remediation of tri- and hexalent chromium from water, J. Hazard. Mater., 13, 762, 10.1016/j.jhazmat.2006.06.060 Tan, 2008, Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology, Chem. Eng. J., 137, 462, 10.1016/j.cej.2007.04.031 Babel, 2003, A research study on Cr(VI) removal from contaminated wastewater using natural zeolite, J. Ion Exch., 14, 289, 10.5182/jaie.14.Supplement_289 APhA, 2005 Xin-hui, 2011, Preparation of activated carbon from Jatropha hull with microwave heating: Optimization using response surface methodology, Fuel Process. Technol., 92, 394, 10.1016/j.fuproc.2010.09.033 Singh, 2010, Experimental design and response surface modeling for optimization of rhodamine B removal from water by magnetic nanocomposite, Chem. Eng. J., 165, 151, 10.1016/j.cej.2010.09.010 Alvarez-Vazquez, 2004, Membrane bioreactors vs conventional biological treatment of landfill leachate: a brief review, J. Chem. Technol. Biotechnol., 79, 1043, 10.1002/jctb.1072 Huo, 2008, Characteristics of dissolved organic matter (DOM) in leachate with different landfill ages, J. Environ. Sci., 20, 492, 10.1016/S1001-0742(08)62085-9 Adinata, 2007, Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3, Bioresour. Technol., 98, 145, 10.1016/j.biortech.2005.11.006 Salman, 2013, Optimization of preparation condition for activated carbon from palm oil fronds using response surface methodology on removal of pesticide from aqueous solution, Arab. J. Chem., 7, 101, 10.1016/j.arabjc.2013.05.033 Mohamed, 2010, Preparation of carbon molecular sieve from lignocellulosic biomass: a review, Renew. Sust. Energy Rev., 14, 1591, 10.1016/j.rser.2010.01.024 Naik, 2010, Characterization of Canadian biomass for alternative renewable biofuel, Renew. Energy, 35, 1624, 10.1016/j.renene.2009.08.033 Sahoo, 2011, Characterization of industrial lignins for their utilization in future value added applications, Biomass Bioenergy, 35, 4230, 10.1016/j.biombioe.2011.07.009 Saw, 2011, Surface modification of coir fiber involving oxidation of lignin followed by reaction with furfuryl alcohol: characterization and stability, Appl. Surf. Sci., 257, 3762, 10.1016/j.apsusc.2010.11.136 Hoareau, 2004, Sugar cane bagasse and curaua lignins oxidized by chlorine dioxide and reacted with furfuryl alcohol: characterization and stability, Polym. Degrad. Stab., 86, 567, 10.1016/j.polymdegradstab.2004.07.005 Gomez-Serrano, 1996, FT-IR study of rockrose and of char and activated carbon, J. Anal. Appl. Pyrol., 36, 71, 10.1016/0165-2370(95)00921-3 Lua, 2004, Effect of activation temperature on the textural and chemical properties of potassium hydroxide activated carbon prepared from pistachio-nut shell, J. Colloid Interface Sci., 274, 594, 10.1016/j.jcis.2003.10.001 Pearson, 1963, Hard and soft acids and bases, J. Am. Chem. Soc., 85, 3533, 10.1021/ja00905a001