Preparation of structured catalysts with Ni and Ni–Rh/CeO2 catalytic layers for syngas production by biogas reforming processes

Braga, 2013, Hydrogen production by biogas steam reforming: a technical, economic and ecological analysis, Renew. Sust. Energy Rev., 28, 166, 10.1016/j.rser.2013.07.060 Ahmed, 2001, Hydrogen from hydrocarbon fuels for fuel cells, Int. J. Hydrogen Energy, 26, 291, 10.1016/S0360-3199(00)00097-5 Dunn, 2002, Hydrogen futures: toward a sustainable energy system, Int. J. Hydrogen Energy, 27, 235, 10.1016/S0360-3199(01)00131-8 Edwards, 2007, Hydrogen energy, Philos. Trans. Math. Phys. Eng. Sci., 365, 1043 Specchia, 2014, Fuel processing activities at European level: a panoramic overview, Int. J. Hydrogen Energy, 39, 17953, 10.1016/j.ijhydene.2014.04.040 Xu, 2009, Biogas reforming for hydrogen production over nickel and cobalt bimetallic catalysts, Int. J. Hydrogen Energy, 34, 6646, 10.1016/j.ijhydene.2009.06.038 Ashrafi, 2008, Experimental study of model biogas catalytic steam reforming: 1. Thermodynamic optimization, Energy Fuels, 22, 4182, 10.1021/ef800081j Maney, 2005, Carbon dioxide emissions, climate change, and the clean air act: An analysis of whether carbon dioxide should be listed as a criteria pollutant, N.Y.U. Environ. Law J., 13, 298 Izquierdo, 2012, Biogas steam and oxidative reforming processes for synthesis gas and hydrogen production in conventional and microreactor reaction systems, Int. J. Hydrogen Energy, 37, 13829, 10.1016/j.ijhydene.2012.04.077 Izquierdo, 2013, Tri-reforming: A new biogas process for synthesis gas and hydrogen production, Int. J. Hydrogen Energy, 38, 7623, 10.1016/j.ijhydene.2012.09.107 Araki, 2009, Durability of a Ni based monolithic catalyst in the autothermal reforming of biogas, Int. J. Hydrogen Energy, 34, 4727, 10.1016/j.ijhydene.2009.03.041 Tomishige, 2004, Syngas production by biomass gasification using Rh/CeO2/SiO2 catalysts and fluidized bed reactor, Catal. Today, 89, 389, 10.1016/j.cattod.2004.01.002 Kusakabe, 2004, Methane steam reforming over Ce-ZrO2-supported noble metal catalysts at low temperature, Fuel Process. Technol., 86, 319, 10.1016/j.fuproc.2004.05.003 Nurunnabi, 2005, Performance of NiO–MgO solid solution-supported Pt catalysts in oxidative steam reforming of methane, Appl. Catal. A, 292, 272, 10.1016/j.apcata.2005.06.022 Michael, 2009, Effects of H2O and CO2 addition in catalytic partial oxidation of methane on Rh, J. Catal., 265, 117, 10.1016/j.jcat.2009.04.015 Laosiripojana, 2005, Methane steam reforming over Ni/Ce–ZrO2 catalyst: Influences of Ce–ZrO2 support on reactivity, resistance toward carbon formation, and intrinsic reaction kinetics, Appl. Catal. A, 290, 200, 10.1016/j.apcata.2005.05.026 Huang, 2005, Effect of steam and carbon dioxide pretreatments on methane decomposition and carbon gasification over doped-ceria supported nickel catalyst, Catal. Letters, 102, 175, 10.1007/s10562-005-5852-8 Vita, 2015, Influence of Ce-precursor and fuel on structure and catalytic activity of combustion synthesized Ni/CeO2 catalysts for biogas oxidative steam reforming, Mater. Chem. Phys., 163, 337, 10.1016/j.matchemphys.2015.07.048 Lin, 2012, Biogas reforming for hydrogen production over mesoporous Ni2xCe1−xO2 catalysts, Int. J. Hydrogen Energy, 37, 15696, 10.1016/j.ijhydene.2012.03.130 Italiano, 2015, Bio-hydrogen production by oxidative steam reforming of biogas over nanocrystalline Ni/CeO2 catalysts, Int. J. Hydrogen Energy, 40, 11823, 10.1016/j.ijhydene.2015.04.146 Tsipouriari, 1994, Reforming of methane with carbon dioxide to synthesis gas over supported Rh catalysts, Catal. Today, 21, 579, 10.1016/0920-5861(94)80182-7 Chen, 1997, Promoting effect of Pt, Pd and Rh noble metals to the Ni0.03Mg0.97O solid solution catalysts for the reforming of CH4 with CO2, Appl. Catal. A, 165, 335, 10.1016/S0926-860X(97)00216-0 Specchia, 2004, In situ combustion synthesis of perovskite catalysts for efficient and clean methane premixed metal burners, Chem. Eng. Sci., 59, 5091, 10.1016/j.ces.2004.08.028 Jain, 1981, A new approach to thermochemical calculations of condensed fuel-oxidizer mixtures, Combust. Flame, 40, 71, 10.1016/0010-2180(81)90111-5 Purohit, 2001, Ultrafine ceria powders via glycine-nitrate combustion, Mater. Res. Bull., 36, 2711, 10.1016/S0025-5408(01)00762-0 Chen, 2006, Combustion synthesis and characterization of nanocrystalline CeO2-based powders via ethylene glycol-nitrate process, Mater. Lett., 60, 57, 10.1016/j.matlet.2005.07.088 Sadykov, 2012 Domine, 2008, Hydrogen production from biomass-derived oil over monolithic Pt- and Rh-based catalysts using steam reforming and sequential cracking processes, Catal. Today, 133-135, 565, 10.1016/j.cattod.2007.12.062 Ciambelli, 2010, Comparison of ceramic honeycomb monolith and foam as Ni catalyst carrier for methane autothermal reforming, Catal. Today, 155, 92, 10.1016/j.cattod.2009.01.021 Sadykov, 2010, Transformation of CH4 and liquid fuels into syngas on monolithic catalysts, Fuel, 89, 1230, 10.1016/j.fuel.2009.12.015 Smorygo, 2013, Porous substrates for intermediate temperature SOFCs and in-cell reforming catalysts, Catal. Sustain. Energy, 1, 90 Palma, 2013, Methane auto-thermal reforming on honeycomb and foam structured catalysts: the role of the support on system performances, Catal. Today, 216, 30, 10.1016/j.cattod.2013.07.001 Sadykov, 2015, Structured catalysts for steam/autothermal reforming of biofuels on heat-conducting substrates: design and performance, Catal. Today, 251, 19, 10.1016/j.cattod.2014.10.045 Vita, 2015, Syngas production by methane Oxy-steam reforming on Me/CeO2 (Me=Rh, Pt Ni) catalyst lined on cordierite monoliths, Appl. Catal. B, 162, 551, 10.1016/j.apcatb.2014.07.028 Meille, 2006, Review on methods to deposit catalysts on structured surfaces, Appl. Catal. A, 315, 1, 10.1016/j.apcata.2006.08.031 Sanz, 2013, Chapter 9—advances in structured and microstructured catalytic reactors for hydrogen production, 201 Banús, 2013, Catalytic coating synthesized onto cordierite monolith walls. Its application to diesel soot combustion, Appl. Catal. B, 132-133, 479, 10.1016/j.apcatb.2012.12.020 Avila, 2005, Monolithic reactors for environmental applications − A review on preparation technologies, Chem. Eng. J., 109, 11, 10.1016/j.cej.2005.02.025 Montebelli, 2014, Methods for the catalytic activation of metallic structured substrates, Catal. Sci. Technol., 4, 2846, 10.1039/C4CY00179F Middleman, 1977 Brinker, 1990 Valentini, 2001, The deposition of-Al2O3 layers on ceramic and metallic supports for the preparation of structured catalysts, Catal. Today, 69, 307, 10.1016/S0920-5861(01)00383-2 Balzarotti, 2015, Washcoating of low surface area cerium oxide on complex geometry substrates, Part. Sci. Technol., null Cristiani, 2012, Activation of metallic open-cell foams via washcoat deposition of Ni/MgAl2O4 catalysts for steam reforming reaction, Catal. Today, 197, 256, 10.1016/j.cattod.2012.09.003 Montebelli, 2014, Washcoating and chemical testing of a commercial Cu/ZnO/Al2O3 catalyst for the methanol synthesis over copper open-cell foams, Appl. Catal. A, 481, 96, 10.1016/j.apcata.2014.05.005 Pino, 2011, Hydrogen production by methane tri-reforming process over Ni-ceria catalysts: effect of La-doping, Appl. Catal. B, 104, 64, 10.1016/j.apcatb.2011.02.027 Xiaoyuan, 2001, Studies of pore structure temperature-programmed reduction performance, and micro-structure of CuO/CeO2 catalysts, Appl. Surf. Sci., 173, 208, 10.1016/S0169-4332(00)00897-7 Kugai, 2005, Low-temperature reforming of ethanol over CeO2-supported Ni–Rh bimetallic catalysts for hydrogen production, Catal. Lett., 101, 255, 10.1007/s10562-005-4901-7 Hou, 2015, Hydrogen production from ethanol steam reforming over Rh/CeO2 catalyst, Catal. Commun., 58, 137, 10.1016/j.catcom.2014.09.020 Menegazzo, 2012, Optimization of bimetallic dry reforming catalysts by temperature programmed reaction, Appl. Catal. A, 439–440, 80, 10.1016/j.apcata.2012.06.041 Kugai, 2006, Effects of nanocrystalline CeO2 supports on the properties and performance of Ni–Rh bimetallic catalyst for oxidative steam reforming of ethanol, J. Catal., 238, 430, 10.1016/j.jcat.2006.01.001 Patcas, 2007, CO oxidation over structured carriers: a comparison of ceramic foams, honeycombs and beads, Chem. Eng. Sci., 62, 3984, 10.1016/j.ces.2007.04.039 Williams, 2001, Monolith structures materials, properties and uses, Catal. Today, 69, 3, 10.1016/S0920-5861(01)00348-0 Gibson, 1999 Cybulski, 1994, Monoliths in heterogeneous catalysis, Catal. Rev., 36, 179, 10.1080/01614949408013925 Buciuman, 2003, Ceramic foam monoliths as catalyst carriers. 1. Adjustment and description of the morphology, Ind. Eng. Chem. Res., 42, 1863, 10.1021/ie0204134 Angeli, 2016, Catalyst development for steam reforming of methane and model biogas at low temperature, Appl. Catal. B, 181, 34, 10.1016/j.apcatb.2015.07.039 Roy, 2015, Steam-biogas reforming over a metal-foam-coated (Pd–Rh)/(CeZrO2–Al2O3) catalyst compared with pellet type alumina-supported Ru and Ni catalysts, J. CO2 Util., 12, 12, 10.1016/j.jcou.2015.09.003 Tomishige, 2002, Effective heat supply from combustion to reforming in methane reforming with CO2 and O2: comparison between Ni and Pt catalysts, Appl. Catal. A, 233, 35, 10.1016/S0926-860X(02)00131-X Tomishige, 2004, Effect of oxygen addition to steam and dry reforming of methane on bed temperature profile over Pt and Ni catalysts, Fuel Process. Technol., 85, 1103, 10.1016/j.fuproc.2003.10.014 van Looij, 1997, Nature of the active phase of a nickel catalyst during the partial oxidation of methane to synthesis gas, J. Catal., 168, 154, 10.1006/jcat.1997.1620