Scale considerations for fire testing of pressure vessels used for dangerous goods transportation

A.P.Institute, 2007, 192 Anderson, 1982, Rail tank car safety by fire protection Appleyard, 1980 Balke, 1999 Birk, 1983 Birk, 1995, Scale effects with fire exposure of pressure liquefied Gas tanks, Journal of Loss Prevention in the Process Industries, 8, 275, 10.1016/0950-4230(95)00028-Y Birk, 1996, Liquid temperature stratification and its effect on BLEVEs and their hazards, Journal of Hazardous Materials, 48, 219, 10.1016/0304-3894(95)00157-3 Birk, 2002, Fire tests to study the effect of pressure relief valve behaviour on the survivability of propane tanks in fires Birk, 2005 Birk, 2006, On the transition from non-BLEVE to BLEVE failure for a 1.8 m3 propane tank, ASME Journal of Pressure Vessel Technology, 128, 648, 10.1115/1.2349579 Birk, 2003 Birk, 2004 Birk, 2006, "High temperature stress-rupture data for the analysis of dangerous goods tank-cars exposed to fire,", Journal of Loss Prevention in the Process Industries, 19, 442, 10.1016/j.jlp.2005.11.003 Boyer, 1988 C.S-1.2, 2009, CGA S-1.2 2008, CFR 49 part 179 Specification for tank cars 1997 Cowgill, 1981, The creep rupture properties of ASME SA516 (Grade 55) steel in the range 426 ßC to 872 ßC, Journal of Engineering Materials and Technology, 103, 253, 10.1115/1.3225010 Droste, 1988, Full scale fire tests with unprotected and thermal insulated LPG storage tanks, Journal of Hazardous Materials, 20, 41, 10.1016/0304-3894(88)87005-5 Hadjisophocleous, 1990, A study of the effect of the tank diameter on the thermal stratification in LPG tanks subjected to fire engulfment, Journal of Hazardous Materials, 25, 19, 10.1016/0304-3894(90)85067-D Janssens, M. L., & Sharp, M. (Sept 2008). Custom fire test results for next generation tank car – Foam thermal properties. Vol. SWRI Project Number 18.13405.01.100. Keltner, 1990, Test unit effects on heat transfer in large fires, Journal of Hazardous Materials, 25, 33, 10.1016/0304-3894(90)85068-E Landucci, 2009, Experimental and analytical investigation of thermal coating effectiveness for 3 cubic metre LPG tanks engulfed by fire, Journal of Hazardous Materials, 161, 1182, 10.1016/j.jhazmat.2008.04.097 Manu, 2009, Stress rupture predictions of pressure vessels exposed to fully engulfing and local impingement accidental fire heat loads, Engineering Failure Analysis, 16, 1141, 10.1016/j.engfailanal.2008.07.018 Manu, 2009, Uniaxial high temperature creep property predictions made by CDM and MPC Omega techniques for ASME SA 455 steel, Engineering Failure Analysis, 16, 1303, 10.1016/j.engfailanal.2008.08.005 Moodie, 1988, Experiments and modelling: an overview with particular reference to fire engulfment, Journal of Hazardous Materials, 20, 149, 10.1016/0304-3894(88)87011-0 Moodie, 1988, Fire engulfment test of a 5 Tonne LPG tank, Journal of Hazardous Materials, 20, 55, 10.1016/0304-3894(88)87006-7 Ramskill, 1988, A description of the ENGULF computer codes – codes to model the thermal response of an LPG tank either fully or partially engulfed by fire, Journal of Hazardous Materials, 20, 177, 10.1016/0304-3894(88)87012-2 Reid, 1979, Possible Mechanism for pressurized liquid tank explosions or BLEVEs, Science, 203, 1263, 10.1126/science.203.4386.1263 Roberts, 2004, Design and protection of pressure systems to withstand severe fires, Process Safety and Environmental Protection, 89, 10.1205/095758204322972735 Townsend, W., Anderson, C. E., Zook, J., & Cowgill, G. Comparison of thermally coated and uninsulated rail tank-cars filled with LPG subjected to a fire environment. US DOT Report1974. Venart, 1986