Determination of the Dendrite Coherency Point during Solidification by Means of Thermal Diffusivity Analysis
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science - Tập 38 - Trang 1875-1879 - 2007
Tóm tắt
Dendrite coherency point in an aluminum-silicon-copper casting alloy was determined by analyses of the variation of the thermal diffusivity. The analysis was carried out using the readings of three thermocouples inserted at equal distances in a mould holding the alloy left to solidify. The values obtained by this method are confirmed by metallographic observations on samples left to solidify to the coherency point before plunging them in water.
Tài liệu tham khảo
J. Campbell: Castings, Butterworth-Heinemann, London, 1991
L. Arnberg, G. Chai, L. Bäckerud: Mater. Sci. Eng. A, 1993, 173A: 101–03
L. Arnberg, A.K. Dahle, C.J. Paradies: AFS Trans., AFS, Des Plaines, IL, 1995, vol. 105, pp. 753–59
N.L.M. Veldman, A.K. Dahle, D.H. StJohn, L. Arnberg: Metall. Mater. Trans. A, 2001, 32A: 147–55
D.M. Stefanescu: Science and Engineering of Casting Solidification, Kluwer Academic, Berlin, 2002
R. Colás, E. Velasco, and S. Valtierra: in Castings, Handbook of Aluminum, vol. 1, Physical Metallurgy and Processes, G.E. Totten and D.S. MacKenzie, eds., Marcel Dekker, Inc., New York, NY, 2003, pp. 591–641
A.K. Dahle, D.H. StJohn: Acta Mater., 1999, 47: 31–41
M.C. Flemings: Metall. Trans. A, 1991, 22A: 957–81
R.A. Rosenberg, M.C. Flemings, H.F. Taylor: Trans. AFS, 1960, 68: 518–28
D. Warrington, D.G. McCartney: Cast Metall., 1989, 2: 134–43
C. Chai, L. Bäckerud, L. Arnerg: Mater. Sci. Technol., 1995, 11: 1099–1103
L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, vol. 2, Foundry Alloys, AFS/Skanaluminium, Des Plaines, IL, 1990
L. Arnbert, L. Bäckerud, and G. Chai: Solidification Characteristics of Aluminum Alloys, vol. 3, Dendritic Coherency, AFS, Des Plaines, IL, 1996
H. Jiang, W.T. Kierkus, J.H. Sokolowski: AFS Trans., 1999, 109: 162–72
B. Treviño-Cardona, I. Gómez de la Fuente, R. Colás: J. Am. Ceram. Soc., 2004, 87: 973–76
W.T. Kierkus, J.H. Sokolowski: AFS Trans., 1999, 66: 161–67
Numerical Simulation of Foundry Processes, F. Bonollo and S. Odorizzi, eds., Servizi Grafici Editoriali, Padova, 2001