Optimisation of steel fibre reinforced concretes by means of statistical response surface method

Balaguru, 1992, Flexural toughness of steel fibre reinforced concrete, ACI Mater. J., 89, 541 Wafa, 1992, Mechanical properties of high-strength fibre reinforced concrete, ACI Mater. J., 89, 449 Banthia, 1995, Concrete reinforced with deformed steel fibres. Part II: Toughness characterization, ACI Mater. J., 92, 146 Kurihara, 2000, Tension softening diagrams and evaluation of properties of steel fibre reinforced concrete, Eng. Fract. Mech., 65, 235, 10.1016/S0013-7944(99)00116-2 Barros, 1999, Flexural behaviour of SFRC: testing and modelling, J. Mater. Civ. Eng., 11, 331, 10.1061/(ASCE)0899-1561(1999)11:4(331) ASTM. Standard test method for flexural toughness and first-crack strength of steel fibre reinforced concrete (using beam with third-point loading), ASTM C 1018-97, Philadelphia, 1997 JSCE-SF4. Method of tests for flexural strength and flexural toughness of steel fibre reinforced concrete. Concrete Library of JSCE. Japan Society of Civil Engineers (JSCE), Tokyo, vol. 3, 1984, p. 58–61 Hordijk DA. Local approach to fatigue of concrete. PhD dissertation. Delft University of Technology, Delft, Netherlands, 1991 Hillerborg, 1976, Analysis of crack formation and crack growths in concrete by means of fracture mechanics and finite elements, Cem. Concr. Res., 6, 773, 10.1016/0008-8846(76)90007-7 RILEM 50-FMC. Committee of fracture mechanics of concrete. Determination of fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct. 1985;18(106):285–90 Li, 1991, Micromechanical model of tension softening and bridging toughening of short random fibre reinforced brittle matrix composites, J. Mech. Phys. Solids, 39, 607, 10.1016/0022-5096(91)90043-N Brandt, 1995 Lange-Kornbak, 1998, Design of fibre-reinforced DSP mixes for minimum brittleness, Adv. Cem. Based Mater., 7, 89, 10.1016/S1065-7355(97)00057-6 Karihaloo, 2001, Optimisation technique for the design of high-performance fibre-reinforced concrete, Struct. Multidiscip. Optimisation, 21, 32, 10.1007/s001580050165 Simon, 1999, Optimising high-performance concrete mixtures using statistical response surface methods, 1311 Hillerborg A. Concrete fracture energy tests performed by 9 laboratories according to a draft RILEM recommendation. Report to RILEM TC 50-FMC, Report TVBM-3015, Lund Institute of Technology, Lund, Sweden, 1983 Eren, 1997, Effect of silica fume and steel fibers on some properties of high-strength concrete, Constr. Build. Mater., 11, 373, 10.1016/S0950-0618(97)00058-5 Vandewalle L. Influence of the yield strength of steel fibres on the toughness of fibre reinforced high strength concrete. In: Proceedings, the CCMS Symposium, Worldwide Advances in Structural Concrete and Masonry. Chicago, 1996, p. 496–505 Grünewald S, Walraven JC. High strength self-compacting fibre reinforced concrete: behaviour in the fresh and hardened state. In: König G et al., editor. 6th International Symposium on HSC/HPC, vol. 2, Leipzig, June 2002, p. 977–89 Gao, 1997, Mechanical properties of steel fibre-reinforced, high-strength, lightweight concrete, Cem. Concr. Compos., 19, 307, 10.1016/S0958-9465(97)00023-1 Lange-Kornbak, 1996, Design of concrete mixes for minimum brittleness, Adv. Cem. Based Mater., 3, 124, 10.1016/1065-7355(96)00021-1 Derringer, 1980, Simultaneous optimization of several response variables, J. Qual. Technol., 12, 214, 10.1080/00224065.1980.11980968 Myers, 2002