Temperature fields and residual stress distributions in dissimilar steel butt welds between carbon and stainless steels

Gardner, 2005, The use of stainless steel in structures, Prog. Struct. Engng. Mater., 7, 48, 10.1002/pse.190 Sun, 1996, The application of electron beam welding for the joining of dissimilar metals: an overview, J. Mater. Process. Technol., 59, 257, 10.1016/0924-0136(95)02150-7 Joseph, 2005, Evaluation of residual stresses in dissimilar weld joints, Int. J. Pressure Vessels Pip., 82, 700, 10.1016/j.ijpvp.2005.03.006 Jang, 2008, Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel, Int. J. Press. Vessels Pip., 85, 635, 10.1016/j.ijpvp.2007.08.004 Muránsky, 2011, Validated numerical analysis of residual stresses in Safety Relief Valve (SRV) nozzle mock-ups, Comput. Mater. Sci., 50, 2203, 10.1016/j.commatsci.2011.02.031 Taljat, 1998, Numerical analysis of GTA welding process with emphasis on post-solidification phase transformation effects on the residual stresses, Mater. Sci. Eng. A, 246, 45, 10.1016/S0921-5093(97)00729-6 Hibbitt, 1973, A numerical thermo-mechanical model for the welding and subsequent loading of fabrication structure, Comput. Struct., 3, 1145, 10.1016/0045-7949(73)90043-6 Goldak, 1986, Computer modeling of heat flow in welds, Metall. Mater. Trans. B, 17, 587, 10.1007/BF02670226 Karlsson, 1990, Three-dimensional finite element analysis of temperatures and stresses in a single-pass butt-welded pipe, J. Press. Vessel. Technol., 112, 76, 10.1115/1.2928591 Lindgren, 2001, Finite element modelling and simulation of welding, Part 1 increased complexity, J. Therm. Stresses, 24, 141, 10.1080/01495730150500442 Lindgren, 2001, Finite element modelling and simulation of welding, Part 2 improved material modeling, J. Therm. Stresses, 24, 195, 10.1080/014957301300006380 Lindgren, 2001, Finite element modelling and simulation of welding, Part 3 efficiency and integration, J. Therm. Stresses, 24, 305, 10.1080/01495730151078117 Dimitrios, 2005, Residual stress prediction in dissimilar metal weld pipe joints using the finite element method, Mat. Sci. Forum, 490–491, 53 Nadimi, 2008, Investigation and analysis of weld induced residual stresses in two dissimilar pipes by finite element modeling, J. Appl. Sci., 8, 1014 Akbari, 2009, Effect of welding heat input on residual stresses in butt-welds of dissimilar pipe joints, Int. J. Pressure Vessels Pip., 86, 769, 10.1016/j.ijpvp.2009.07.005 Deng, 2009, Prediction of residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment, Comput. Mater. Sci., 47, 398, 10.1016/j.commatsci.2009.09.001 Deng, 2011, Predicting welding residual stresses in a dissimilar metal girth welded pipe using 3D finite element model with a simplified heat source, Nucl. Eng. Des., 241, 46, 10.1016/j.nucengdes.2010.11.010 del Coz Diaz, 2010, Comparative analysis of TIG welding distortions between austenitic and duplex stainless steels by FEM, Appl. Therm. Eng., 30, 2448, 10.1016/j.applthermaleng.2010.06.016 Sedek, 2003, Residual stress relief in MAG welded joints of dissimilar steels, Int. J. Pressure Vessels Pip, 80, 705, 10.1016/j.ijpvp.2003.08.004 Lee, 2007, Numerical analysis of residual stresses in welds of similar or dissimilar steel weldments under superimposed tensile loads, Comput. Mater. Sci., 40, 548, 10.1016/j.commatsci.2007.02.005 Lee, 2008, Numerical investigation of the residual stresses in strength-mismatched dissimilar steel butt welds, J. Strain Anal. Eng. Des, 43, 55, 10.1243/03093247JSA313 C.H. Lee, A study on the mechanical characteristics of high strength steel for the application to the steel bridge, Ph.D. Thesis, Chung-Ang University, Korea, 2005. Pardo, 1989, Prediction of weld pool and reinforcement dimensions of GMA welds using a finite element model, Metall. Mater. Trans. B, 20, 937, 10.1007/BF02670199 Abid, 2005, Numerical simulation to study the effect of tack welds and root gap on welding deformations and residual stresses of a pipe-flange joint, Int. J. Press. Vessels Pip, 82, 860, 10.1016/j.ijpvp.2005.06.008 Brickstad, 1998, A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes, Int. J. Pressure Vessels Pip, 75, 11, 10.1016/S0308-0161(97)00117-8 Deng, 2006, Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements, Comput. Mater. Sci., 37, 269, 10.1016/j.commatsci.2005.07.007 Deng, 2008, Numerical and experimental investigations on welding residual stress in multi-pass butt-welded austenitic stainless steel pipe, Comput. Mater. Sci., 42, 234, 10.1016/j.commatsci.2007.07.009 Bathe, 1996 Seyyedian, 2009 Lee, 2004, Prediction of stress and deformation by 2D and 3D-FEM analysis and its accuracy, J. COSEIK, 17, 365 Sattari-Far, 2008, Influence of welding sequence on welding distortions in pipes, Int. J. Pressure Vessels Pip, 85, 265, 10.1016/j.ijpvp.2007.07.003 Barsoum, 2008, Residual stress analysis and fatigue of multi-pass welded tubular structures, Eng. Fail. Anal., 15, 863, 10.1016/j.engfailanal.2007.11.016 Paradowska, 2005, A neutron diffraction study of residual stress due to welding, J. Mater. Process. Technol., 164-165, 1099, 10.1016/j.jmatprotec.2005.02.092