A compendious review on lack-of-fusion in digital concrete fabrication

Ngo, 2018, Additive manufacturing (3D printing): a review of materials, methods, applications and challenges, Compos. Part B Eng., 143, 172, 10.1016/j.compositesb.2018.02.012 Mitchell, 2018, Additive manufacturing — a review of 4D printing and future applications, Addit. Manuf., 24, 606 Sossou, 2018, Design for 4D printing: rapidly exploring the design space around smart materials, Procedia CIRP, 70, 120, 10.1016/j.procir.2018.02.032 Colosimo, 2019, A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing, Int. J. Prod. Econ. Mahadik, 2018, Implementation of additive manufacturing cost estimation tool (AMCET) using break-down approach, Procedia Manuf., 17, 70, 10.1016/j.promfg.2018.10.014 Gangireddy, 2019, Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy, Addit. Manuf., 26, 53 Juechter, 2018, Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications, Addit. Manuf., 22, 118 Culmone, 2019, Additive manufacturing of medical instruments: a state-of-the-art review, Addit. Manuf., 27, 461 du Plessis, 2019, Beautiful and functional: a review of biomimetic design in additive manufacturing, Addit. Manuf., 27, 408 Carlton, 2016, Damage evolution and failure mechanisms in additively manufactured stainless steel, Mater. Sci. Eng. A, 651, 406, 10.1016/j.msea.2015.10.073 Garg, 2017, An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study, Int. J. Mech. Sci., 120, 225, 10.1016/j.ijmecsci.2016.11.032 Zaldivar, 2017, Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM ® 9085 material, Addit. Manuf., 13, 71 Morgan, 2004, Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives, J. Mater. Sci., 39, 1195, 10.1023/B:JMSC.0000013875.62536.fa Coeck, 2019, Prediction of lack of fusion porosity in selective laser melting based on melt pool monitoring data, Addit. Manuf., 25, 347 Zhang, 2017, Defect formation mechanisms in selective laser melting: a review, Chin. J. Mech. Eng. (Engl. Ed.), 30, 515, 10.1007/s10033-017-0121-5 Mower, 2016, Mechanical behavior of additive manufactured, powder-bed laser-fused materials, Mater. Sci. Eng. A, 651, 198, 10.1016/j.msea.2015.10.068 Mukherjee, 2018, Mitigation of lack of fusion defects in powder bed fusion additive manufacturing, J. Manuf. Process., 36, 442, 10.1016/j.jmapro.2018.10.028 Weng, 2020, Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach, J. Clean. Prod. Wangler, 2019, Digital concrete: a review, Cem. Concr. Res., 123, 10.1016/j.cemconres.2019.105780 Paolini, 2019, Additive manufacturing in construction: a review on processes, applications, and digital planning methods, Addit. Manuf., 30 Borg Costanzi, 2018, 3D printing concrete on temporary surfaces: the design and fabrication of a concrete shell structure, Autom. Constr., 94, 395, 10.1016/j.autcon.2018.06.013 Craveiro, 2020, An automated system for 3D printing functionally graded concrete-based materials, Addit. Manuf., 33 Ghaffar, 2018, Additive manufacturing technology and its implementation in construction as an eco-innovative solution, Autom. Constr., 93, 1, 10.1016/j.autcon.2018.05.005 Bos, 2016, Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing, Virtual Phys. Prototyp., 11, 209, 10.1080/17452759.2016.1209867 Ghaffar, 2018, Commentary: 3D printing set to transform the construction industry, Proc. Inst. Civ. Eng. Struct. Build., 171, 737, 10.1680/jstbu.18.00136 De Schutter, 2018, Vision of 3D printing with concrete — technical, economic and environmental potentials, Cem. Concr. Res., 112, 25, 10.1016/j.cemconres.2018.06.001 Gosselin, 2016, Large-scale 3D printing of ultra-high performance concrete – a new processing route for architects and builders, Mater. Des., 100, 102, 10.1016/j.matdes.2016.03.097 Paul, 2017, A review of 3D concrete printing systems and materials properties: current status and future research prospects, Rapid Prototyp. J., 24, 784, 10.1108/RPJ-09-2016-0154 Tay, 2017, 3D printing trends in building and construction industry: a review, Virtual Phys. Prototyp., 12, 261, 10.1080/17452759.2017.1326724 Mechtcherine, 2020, Extrusion-based additive manufacturing with cement-based materials – production steps, processes, and their underlying physics: a review, Cem. Concr. Res., 132, 10.1016/j.cemconres.2020.106037 Lu, 2019, Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent, Constr. Build. Mater., 211, 1073, 10.1016/j.conbuildmat.2019.03.186 Neudecker, 2016, Robotic spray technology for generative manufacturing of complex concrete structures without formwork, Procedia CIRP, 43, 333, 10.1016/j.procir.2016.02.107 Lindemann, 2019, 287 Dressler, 2020, The effect of accelerator dosage on fresh concrete properties and on interlayer strength in shotcrete 3D printing, Materials (Basel), 13, 10.3390/ma13020374 Hack, 2020, Injection 3D concrete printing (I3DCP): basic principles and case studies, Materials (Basel), 13, 10.3390/ma13051093 Lowke, 2018, Particle-bed 3D printing in concrete construction – possibilities and challenges, Cem. Concr. Res., 112, 50, 10.1016/j.cemconres.2018.05.018 Nematollahi, 2019, Post-processing methods to improve strength of particle-bed 3D printed geopolymer for digital construction applications, Front. Mater., 6, 10.3389/fmats.2019.00160 Vantyghem, 2020, 3D printing of a post-tensioned concrete girder designed by topology optimization, Autom. Constr., 112, 10.1016/j.autcon.2020.103084 Salet, 2018, Design of a 3D printed concrete bridge by testing, Virtual Phys. Prototyp., 0, 1 Jipa, 2016, 96 Digital Building Technologies, The Smart Slab, (n.d.). 〈https://dbt.arch.ethz.ch/project/smart-slab/〉. (Accessed 10 March 2020). van Zijl, 2019, Towards sustainable employment in industrialised construction, Constr. Print. Technol. Worldw. J., 1, 18 D. Fuscaldo, Concrete Bridge Created with a 3D Printer Takes the Building Industry by Storm, 2019. 〈https://interestingengineering.com/concrete-bridge-created-with-a-3d-printer-takes-the-building-industry-by-storm〉. (Accessed 10 March 2020). Marijnissen, 2016, 3D concrete printing in architecture, Mater. Stud. Methodol., 2, 299 Hager, 2016, 3D printing of buildings and building components as the future of sustainable construction?, Procedia Eng., 151, 292, 10.1016/j.proeng.2016.07.357 A. Frearson, Eindhoven to Build “World’s First” 3D-printed Houses That People Will Live inside, 2018. 〈https://www.dezeen.com/2018/06/04/eindhoven-university-technology-project-milestone-3d-printed-concrete-houses/〉. (Accessed 10 March 2020). A. Toor, Dutch Architect to Build Gorgeous “Landscape House” Using 3D Printer, 2013. 〈https://www.theverge.com/2013/1/20/3897006/3d-printed-landscape-house-from-enrico-dini-d-shape〉. (Accessed 10 March 2020). N.P. Walsh, ETH Zurich Develops 3D-Printed Concrete Columns, 2019. 〈https://www.archdaily.com/921635/eth-zurich-develops-3d-printed-concrete-columns〉. (Accessed 10 March 2020). B. Jackson, RCAM Technologies and Accucode Target 3D Printing for Offshore Wind Turbines, 2019. 〈https://3dprintingindustry.com/news/rcam-technologies-and-accucode-target-3d-printing-for-offshore-wind-turbines-166638/〉. (Accessed 19 March 2020). Buchanan, 2019, Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges, Eng. Struct., 180, 332, 10.1016/j.engstruct.2018.11.045 Joosten, 2015 Li, 2020, On the emergence of 3D printable engineered, strain hardening cementitious composites (ECC/SHCC), Cem. Concr. Res., 132, 10.1016/j.cemconres.2020.106038 Chaves Figueiredo, 2019, An approach to develop printable strain hardening cementitious composites, Mater. Des., 169, 10.1016/j.matdes.2019.107651 Rahul, 2020, Evaluating the printability of concretes containing lightweight coarse aggregates, Cem. Concr. Compos., 109, 10.1016/j.cemconcomp.2020.103570 Cho, 2020, 373 S. Cho, J. Kruger, S. Zeranka, A. van Rooyen, G. van Zijl, Mechanical evaluation of 3D printable nano-silica incorporated fibre-reinforced lightweight foam concrete, in: Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FRAMCOS-X), 2019. 〈https://doi.org/10.21012/fc10.232696〉. M. van den Heever, F.A. Bester, P.J. Kruger, G.P.A.G. vanZijl, Effect of silicon carbide (SiC) nanoparticles on 3D printability of cement-based materials, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, in: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019, pp. 1616–1621. 〈https://doi.org/10.1201/9780429426506-279〉. Panda, 2019, Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing, Compos. Part B Eng., 176, 10.1016/j.compositesb.2019.107290 Panda, 2020, Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing, Compos. Part B Eng., 186, 10.1016/j.compositesb.2020.107826 Nematollahi, 2018, Effect of type of fiber on inter-layer bond and flexural strengths of extrusion-based 3D printed geopolymer, Mater. Sci. Forum, 939, 155, 10.4028/www.scientific.net/MSF.939.155 Nematollahi, 2018, Effect of polypropylene fibre addition on properties of geopolymers made by 3D printing for digital construction, Mater. (Basel), 11 Arunothayan, 2019, Development of a 3D-printable ultra-high performance fiber-reinforced concrete for digital, Construction, 1 Kim, 2019, Dimensional stability of SBR-modified cementitious mixtures for use in 3D additive construction, Appl. Sci., 9 Nerella, 2019, Inline quantification of extrudability of cementitious materials for digital construction, Cem. Concr. Compos., 95, 260, 10.1016/j.cemconcomp.2018.09.015 Tay, 2019, Printability region for 3D concrete printing using slump and slump flow test, Compos. Part B Eng., 174, 10.1016/j.compositesb.2019.106968 Lo Monte, 2020, 237 S. Cho, J. Kruger, F. Bester, M. van den Heever, A. vanRooyen, G. van Zijl, A compendious rheo-mechanical test for printability assessment of 3D printable concrete, in: Proceedings of the 2nd RILEM International Conference on Concrete and Digital Fabrication, Eindhoven, The Netherlands, 2020. Kruger, 2019, An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete, Constr. Build. Mater., 224, 10.1016/j.conbuildmat.2019.07.078 Liu, 2019, Mixture design approach to optimize the rheological properties of the material used in 3D cementitious material printing, Constr. Build. Mater., 198, 245, 10.1016/j.conbuildmat.2018.11.252 Weng, 2018, Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing, Constr. Build. Mater., 189, 676, 10.1016/j.conbuildmat.2018.09.039 Zhang, 2018, The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes, Constr. Build. Mater., 184, 575, 10.1016/j.conbuildmat.2018.06.233 Ivanova, 2020, Possibilities and challenges of constant shear rate test for evaluation of structural build-up rate of cementitious materials, Cem. Concr. Res., 130, 10.1016/j.cemconres.2020.105974 Nerella, 2019, Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction, Cem. Concr. Res., 115, 530, 10.1016/j.cemconres.2018.08.003 Reiter, 2018, The role of early age structural build-up in digital fabrication with concrete, Cem. Concr. Res., 112, 86, 10.1016/j.cemconres.2018.05.011 Roussel, 2019, Recent advances on yield stress and elasticity of fresh cement-based materials, Cem. Concr. Res., 124, 10.1016/j.cemconres.2019.105798 da Silva, 2020, Evaluation of early-age concrete structural build-up for 3D concrete printing by oscillatory rheometry, 35 Casagrande, 2020, Effect of testing procedures on buildability properties of 3D-printable concrete, Constr. Build. Mater., 245, 10.1016/j.conbuildmat.2020.118286 Wolfs, 2019, Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing, Cem. Concr. Compos., 104, 10.1016/j.cemconcomp.2019.103344 Wolfs, 2018, Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing, Cem. Concr. Res., 106, 103, 10.1016/j.cemconres.2018.02.001 Suiker, 2018, Mechanical performance of wall structures in 3D printing processes: theory, design tools and experiments, Int. J. Mech. Sci., 137, 145, 10.1016/j.ijmecsci.2018.01.010 Jayathilakage, 2020, Yield stress criteria to assess the buildability of 3D concrete printing, Constr. Build. Mater., 240, 10.1016/j.conbuildmat.2019.117989 Panda, 2019, Mechanical properties and deformation behaviour of early age concrete in the context of digital construction, Compos. Part B Eng., 165, 563, 10.1016/j.compositesb.2019.02.040 F.A. Bester, M. Van Den Heever, J. Kruger, S. Zeranka, G.P.A.G. Van Zijl, Benchmark structures for 3D concrete printing, in: Proceedings of the Fib Symposium 2019: Concrete – Innovations in Materials, Design and Structures, 2019. Wolfs, 2019, Structural failure during extrusion-based 3D printing processes, Int. J. Adv. Manuf. Technol., 10.1007/s00170-019-03844-6 Roussel, 2018, Rheological requirements for printable concretes, Cem. Concr. Res., 112, 76, 10.1016/j.cemconres.2018.04.005 Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct. Constr., 49, 1213, 10.1617/s11527-015-0571-0 Wangler, 2016, Digital concrete: opportunities and challenges, RILEM Tech. Lett., 1, 67, 10.21809/rilemtechlett.2016.16 J. Kruger, S. Zeranka, G. van Zijl, Quantifying constructability performance of 3D concrete printing via rheology-based analytical models, in: Proceedings of the 2nd International RILEM Conference on Rheology and Processing of Construction Materials, Dresden, Germany, 2019. Kruger, 2019, 3D concrete printing: a lower bound analytical model for buildability performance quantification, Autom. Constr., 106, 10.1016/j.autcon.2019.102904 Kruger, 2020, A rheology-based quasi-static shape retention model for digitally fabricated concrete, Constr. Build. Mater., 10.1016/j.conbuildmat.2020.119241 Kruger, 2020, 3D concrete printer parameter optimisation for high rate digital construction avoiding plastic collapse, Compos. Part B Eng., 183, 10.1016/j.compositesb.2019.107660 Baz, 2020, Effect of the printing method and mortar’s workability on pull-out strength of 3D printed elements, Constr. Build. Mater., 230, 10.1016/j.conbuildmat.2019.117002 Li, 2020, Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions, Compos. Part B Eng., 187, 10.1016/j.compositesb.2020.107796 Bos, 2017, Experimental exploration of metal cable as reinforcement in 3D printed concrete, Materials (Basel), 10, 10.3390/ma10111314 Lim, 2018, Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement, Constr. Build. Mater., 178, 32, 10.1016/j.conbuildmat.2018.05.010 Buswell, 2018, 3D printing using concrete extrusion: a roadmap for research, Cem. Concr. Res., 112, 37, 10.1016/j.cemconres.2018.05.006 Keita, 2019, Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin, Cem. Concr. Res., 123, 10.1016/j.cemconres.2019.105787 van der Putten, 2018, The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials, 234 Diggs-McGee, 2019, Print time vs. elapsed time: a temporal analysis of a continuous printing operation for additive constructed concrete, Addit. Manuf., 28, 205 Wolfs, 2019, Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion, Cem. Concr. Res., 119, 132, 10.1016/j.cemconres.2019.02.017 Nerella, 2019, Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing, Constr. Build. Mater., 205, 586, 10.1016/j.conbuildmat.2019.01.235 Panda, 2017, Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material, Mater. Lett., 209, 146, 10.1016/j.matlet.2017.07.123 Sanjayan, 2018, Effect of surface moisture on inter-layer strength of 3D printed concrete, Constr. Build. Mater., 172, 468, 10.1016/j.conbuildmat.2018.03.232 Paul, 2018, Fresh and hardened properties of 3D printable cementitious materials for building and construction, Arch. Civ. Mech. Eng., 18, 311, 10.1016/j.acme.2017.02.008 Kloft, 2020, Influence of process parameters on the interlayer bond strength of concrete elements additive manufactured by Shotcrete 3D Printing (SC3DP), Cem. Concr. Res., 134, 10.1016/j.cemconres.2020.106078 Wangler, 2020, 448 Khalil, 2017, Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars, Constr. Build. Mater., 157, 382, 10.1016/j.conbuildmat.2017.09.109 Le, 2012, Hardened properties of high-performance printing concrete, Cem. Concr. Res., 42, 558, 10.1016/j.cemconres.2011.12.003 R.J.M. Wolfs, F.P. Bos, E.C.F. van Strien, T.A.M. Salet, A real-time height measurement and feedback system for 3D concrete printing, in: Proceedings of the 2017 Fib Symposium High Tech Concrete: Where Technology and Engineering Meet, 2017, pp. 2474–2483. 〈https://doi.org/10.1007/978-3-319-59471-2〉. Lee, 2019, Evaluation of the mechanical properties of a 3D-printed mortar, Materials (Basel), 12, 1, 10.3390/ma12244104 Shakor, 2019, A study into the effect of different nozzles shapes and fibre-reinforcement in 3D printed mortar, Materials (Basel), 12, 10.3390/ma12101708 Xu, 2019, Volume-forming 3D concrete printing using a variable-size square nozzle, Autom. Constr., 104, 95, 10.1016/j.autcon.2019.03.008 Al-Qutaifi, 2018, Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing, Constr. Build. Mater., 176, 690, 10.1016/j.conbuildmat.2018.04.195 Mechtcherine, 2019, Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing, Autom. Constr., 107, 10.1016/j.autcon.2019.102933 Özalp, 2020, Fresh and hardened properties of 3D high – strength printing concrete and its recent applications, Iran, J. Sci. Technol. Trans. Civ. Eng., 10.1007/s40996-020-00370-4 Panda, 2018, Measurement of tensile bond strength of 3D printed geopolymer mortar, Meas. J. Int. Meas. Confed., 113, 108, 10.1016/j.measurement.2017.08.051 M. van den Heever, F.A. Bester, J. Kruger, G.P.A.G. van Zijl, Effect of silicon carbide (SiC) nanoparticles on 3D printability of cement-based materials, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, in: Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019, pp. 1616–1621. 〈https://doi.org/10.1201/9780429426506-279〉. M. van den Heever, F. Bester, M. Pourbehi, J. Kruger, S. Cho, G. van Zijl, Characterizing the fissility of 3D concrete printed elements viathe cohesive zone method, in: Proceedings of the 2nd RILEM International Conference on Concrete and Digital Fabrication, Springer, Eindhoven, The Netherlands, 2020. Van Der Putten, 2019, Microstructural characterization of 3D printed cementitious materials, Materials (Basel), 12, 10.3390/ma12182993 Zareiyan, 2017, Interlayer adhesion and strength of structures in contour crafting – effects of aggregate size, extrusion rate, and layer thickness, Autom. Constr., 81, 112, 10.1016/j.autcon.2017.06.013 Zhang, 2019, Rheological and harden properties of the high-thixotropy 3D printing concrete, Constr. Build. Mater., 201, 278, 10.1016/j.conbuildmat.2018.12.061 Montemor, 2003, Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques, Cem. Concr. Compos., 25, 491, 10.1016/S0958-9465(02)00089-6 Revert, 2018, Carbonation-induced corrosion: Investigation of the corrosion onset, Constr. Build. Mater., 162, 847, 10.1016/j.conbuildmat.2017.12.066 Zhou, 2015, Carbonation-induced and chloride-induced corrosion in reinforced concrete structures, J. Mater. Civ. Eng., 27, 10.1061/(ASCE)MT.1943-5533.0001209 Talakokula, 2016, Diagnosis of carbonation induced corrosion initiation and progression in reinforced concrete structures using piezo-impedance transducers, Sens. Actuators A Phys., 242, 79, 10.1016/j.sna.2016.02.033 Spiesz, 2013, The apparent and effective chloride migration coefficients obtained in migration tests, Cem. Concr. Res., 48, 116, 10.1016/j.cemconres.2013.02.005 Papadakis, 2000, Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress, Cem. Concr. Res., 30, 291, 10.1016/S0008-8846(99)00249-5 Asprone, 2018, Rethinking reinforcement for digital fabrication with concrete, Cem. Concr. Res., 112, 111, 10.1016/j.cemconres.2018.05.020 W.R. da Silva, T.J. Andersen, A. Kudsk, K.F. Jorgensen, 3D concrete printing of post-tensioned elements, in: Proceedings of the IASS Symposium 2018 Creativity in Structural Design, IASS, 2018, pp. 1–10. M. Moini, J. Olek, B. Magee, P. Zavattieri, J. Youngblood, Additive manufacturing and characterization of architectured cement-based materials via X-ray micro-computed tomography BT, in: Proceedings of the First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018, 2019, pp. 176–189. Cicione, 2020, An experimental study of the behavior of 3D printed concrete at elevated temperatures, Fire Saf. J. Tian, 2018, Pore characteristics (>0.1 mm) of non-air entrained concrete destroyed by freeze-thaw cycles based on CT scanning and 3D printing, Cold Reg. Sci. Technol., 151, 314, 10.1016/j.coldregions.2018.03.027 Anleu, 2018, Quantitative micro XRF mapping of chlorides: possibilities, limitations, and applications, from cement to digital concrete, ETH Zur. https://doi.org/10.1007/978-3-319-99519-9_20C. Schröfl, V.N. Nerella, V. Mechtcherine, Capillary water intake by 3D-printed concrete visualised and quantified by neutron radiography, in: T. Wangler, R.J. Flatt (Eds.), Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication, Springer, Cham, 2018, pp. 217–224. 〈〉. https://doi.org/10.1007/978-94-024-1194-2G.P.A.G. van Zijl, S.R. Bezuidenhout, A. van Rooyen, Strain-hardening cement-based composites: SHCC4, RILEM Bookseries – Strain-Hardening Cement Composites, SHCC4, 15, 2018, pp. 643–650. 〈〉. Papadakis, 1996, Physicochemical processes and mathematical modeling of concrete chlorination, Chem. Eng. Sci., 51, 505, 10.1016/0009-2509(95)00318-5 Fan, 2015, Prediction of chloride penetration into hardening concrete, Adv. Mater. Sci. Eng., 10.1155/2015/616980 Walls, 2017, Informal settlement fires in South Africa: fire engineering overview and full-scale tests on “shacks”, Fire Saf. J., 91, 997, 10.1016/j.firesaf.2017.03.061 Buchanan, 2017 Werner, 2014, The effect of various fire-exposed surface dimensions on the spalling of concrete specimens, Fire Mater., 39, 545, 10.1002/fam.2256 Arioz, 2007, Effects of elevated temperatures on properties of concrete, Fire Saf. J., 42, 516, 10.1016/j.firesaf.2007.01.003 Weng, 2019, Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperatures, Virtual Phys. Prototyp., 14, 284, 10.1080/17452759.2018.1555046 Liu, 2018, A new perspective on nature of fire-induced spalling in concrete, Constr. Build. Mater., 184, 581, 10.1016/j.conbuildmat.2018.06.204 Walls, 2018, Analysis of structures in fire as simplified skeletal frames using a customised beam finite element, Fire Technol., 54, 1655, 10.1007/s10694-018-0762-7 Walls, 2019, Parametric investigation into the cross-section stress-strain behaviour, stiffness and thermal forces of steel, concrete and composite beams exposed to fire, Struct. Fire Eng., 11, 100, 10.1108/JSFE-10-2018-0031 J. Kruger, A. Cicione, F. Bester, M. van den Heever, S. Cho, R. Walls, G. van Zijl, Facilitating ductile failure of 3D printed concrete elements in fire, in: Proceedings of the 2nd RILEM International Conference on Concrete and Digital Fabrication, Springer, Eindhoven, The Netherlands, 2020. Lourenço, 1997, Multisurface interface model for analysis of masonry structures, J. Eng. Mech., 123, 660, 10.1061/(ASCE)0733-9399(1997)123:7(660) Lourenço, 1998, Continuum model for masonry: parameter estimation and validation, J. Struct. Eng., 124, 642, 10.1061/(ASCE)0733-9445(1998)124:6(642) de Villiers, 2019 http://130.149.89.49:2080/v2016/books/stm/default.htm?startat=ch01s01ath01.htmlSimulia, Abaqus 2016 Theory Guide, 2016. 〈〉. Diana, Diana Finite Element Analysis User’s Manual 10.3, Delft, 2017. 〈https://dianafea.com/diana-manuals〉. Beushausen, 2008, Bond strength development between concretes of different ages, Mag. Concr. Res., 60, 65, 10.1680/macr.2007.00108 Illangakoon, 2019, Concrete cold joint formation in hot weather conditions, Constr. Build. Mater., 209, 406, 10.1016/j.conbuildmat.2019.03.093 Chandra Kishen, 2007, Fracture of cold jointed concrete interfaces, Eng. Fract. Mech., 74, 122, 10.1016/j.engfracmech.2006.01.017 Rathi, 2013, Effect of cold joint on strength of concrete, Int. J. Innov. Res. Sci. Eng. Technol., 2, 4671 ASTM C403/C403M, Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance, West Conshohocken, Philadephia, USA, 2008. Beushausen, 2017, The influence of substrate moisture preparation on bond strength of concrete overlays and the microstructure of the OTZ, Cem. Concr. Res., 92, 84, 10.1016/j.cemconres.2016.11.017 Xie, 2002, Microstructure model of the interfacial zone between fresh and old concrete, J. Wuhan Univ. Technol. Mater. Sci. Ed., 17, 64, 10.1007/BF02838421 Lukovic, 2017, Moisture movement in cement-based repair systems monitored by X-ray absorption, Heron, 62, 21 Lukovic, 2016, Effect of moisture exchange on interface formation in the repair system studied by X-ray absorption, Materials (Basel), 9 Panda, 2019, The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete, Materials (Basel), 12, 10.3390/ma12132149 Le, 2012, Hardened properties of high-performance printing concrete, Cem. Concr. Res., 42, 558, 10.1016/j.cemconres.2011.12.003 Liu, 2017, Towards understanding the influence of porosity on mechanical and fracture behaviour of quasi-brittle materials: experiments and modelling, Int. J. Fract., 205, 57, 10.1007/s10704-017-0181-7 Kim, 2017, Evaluation of shear strength of RC beams with multiple interfaces formed before initial setting using 3D printing technology, Materials (Basel), 10, 10.3390/ma10121349 Tay, 2019, Time gap effect on bond strength of 3D-printed concrete, Virtual Phys. Prototyp., 14, 104, 10.1080/17452759.2018.1500420 Björn, 2012, Rheological characterization Nerella, 2020, Direct printing test for buildability of 3D-printable concrete considering economic viability, Autom. Constr., 109, 1, 10.1016/j.autcon.2019.102986 Chen, 2020, Rheological parameters, thixotropy and creep of 3D-printed calcium sulfoaluminate cement composites modified by bentonite, Compos. Part B Eng., 186, 10.1016/j.compositesb.2020.107821 P.J. Kruger, M. van den Heever, S. Cho, S. Zeranka, G. vanZijl, High-performance 3D printable concrete enhanced with nanomaterials, in: Proceedings of the International Conference on Sustainable Materials, Systems and Structure New Generation of Construction Materials, RILEM Publications S.A.R.L., Rovinj, Croatia, 2019, pp. 533–540. Barnes, 1997, Thixotropy—a review, J. Non-Newton. Fluid Mech., 70, 1, 10.1016/S0377-0257(97)00004-9 Roussel, 2008, Distinct-layer casting of SCC: the mechanical consequences of thixotropy, Cem. Concr. Res., 38, 624, 10.1016/j.cemconres.2007.09.023 Mahawish, 2017, Effect of adding silicon carbide and titanium carbide nanoparticles on the performance of the cement pastes, J. Civ. Environ. Eng., 07 He, 2017, Effects of interface roughness and interface adhesion on new-to-old concrete bonding, Constr. Build. Mater., 151, 582, 10.1016/j.conbuildmat.2017.05.049 https://doi.org/10.1007/978-3-319-99519-9_22J. Van Der Putten, G. De Schutter, K. Van Tittelboom, The effect of print parameters on the (micro)structure of 3D printed cementitious materials, in: T. Wangler, R.J. Flatt (Eds.), Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication, Springer, Cham, Zurich, Switzerland, 2019, pp. 234–244. 〈〉. Choi, 2013, Lubrication layer properties during concrete pumping, Cem. Concr. Res., 45, 69, 10.1016/j.cemconres.2012.11.001 Secrieru, 2018, Changes in concrete properties during pumping and formation of lubricating material under pressure, Cem. Concr. Res., 108, 129, 10.1016/j.cemconres.2018.03.018 Secrieru, 2018, Formation of lubricating layer and flow type during pumping of cement-based materials, Constr. Build. Mater., 178, 507, 10.1016/j.conbuildmat.2018.05.118 E. Secrieru, Pumping Behaviour of Modern Concretes – Characterisation and Prediction, TU Dresden, 2018. V. Mechtcherine, Tensile tests, in: G. Fischer (Ed.), Mechanical Characterisation and Testing of Strain Hardening Fibre-Reinforced Cement Based Composites, State of the Art Report Prepared by Subcommittee 1 of RILEM Technical Committee 208-HFC, 2011. van Zijl, 2016, Comparative testing of crack formation in strain-hardening cement-based composites (SHCC), Mater. Struct., 49, 1175, 10.1617/s11527-015-0567-9 EN 196-1, Cement – Determination of Strength, Building Materials 10 – Test. Methods, (n.d.), pp. 66–71. Iosipescu, 1967, New accurate method for single shear testing of metals, J. Mater., 2, 537 van Zijl, 2007, Improved mechanical performance: shear behaviour of strain-hardening cement-based composites (SHCC), Cem. Concr. Res., 37, 1241, 10.1016/j.cemconres.2007.04.009 van der Pluijm, 1999 Verma, 2013, Review of nondestructive testing methods for condition monitoring of concrete structures, J. Constr. Eng., 2013, 1, 10.1155/2013/834572 Helal, 2015, Non-destructive testing of concrete: a review of methods, Electron. J. Struct. Eng., 14, 97, 10.56748/ejse.141931 E. Ohdaira, N. Masuzawa, Presuming the strength of concrete cold joint by ultrasound, in: Proceedings of the IEEE Ultrasonics Symposium, 2001, pp. 755–760. 〈https://doi.org/10.1109/ultsym.2001.991834〉. Wolfs, 2018, Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete, Constr. Build. Mater., 181, 447, 10.1016/j.conbuildmat.2018.06.060 Ma, 2020, Real-time quantification of fresh and hardened mechanical property for 3D printing material by intellectualization with piezoelectric transducers, Constr. Build. Mater., 241, 10.1016/j.conbuildmat.2019.117982 Ma, 2020, A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing, Constr. Build. Mater., 244, 10.1016/j.conbuildmat.2020.118305 Marchment, 2019, Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification, Mater. Des., 169, 10.1016/j.matdes.2019.107684 Wang, 2020, Interlayer bonding improvement of 3D printed concrete with polymer modified mortar: experiments and molecular dynamics studies, Cem. Concr. Compos., 110, 10.1016/j.cemconcomp.2020.103571 Hosseini, 2019, A novel method to enhance the interlayer bonding of 3D printing concrete: an experimental and computational investigation, Cem. Concr. Compos., 99, 112, 10.1016/j.cemconcomp.2019.03.008 Hambach, 2017, Properties of 3D-printed fiber-reinforced portland cement paste, Cem. Concr. Compos., 79, 62, 10.1016/j.cemconcomp.2017.02.001 Ahmed, 2020, On-demand additive manufacturing of functionally graded concrete, Virtual Phys. Prototyp., 0, 1 https://doi.org/10.1007/978-3-030-49916-7_41F. Bester, M. van den Heever, J. Kruger, S. Cho, G. van Zijl, Steel fiber links in 3D printed concrete, in: Proceedings of the Second RILEM International Conference on Concrete Digital Fabrication – Digital Concrete, Springer, Eindhoven, The Netherlands, 2020, pp. 398–406. 〈〉. Perrot, 2020, Nailing of layers: a promising way to reinforce concrete 3D printing structures, Materials (Basel), 13, 1518, 10.3390/ma13071518 Estrin, 2011, Topological interlocking as a material design concept, Mater. Sci. Eng. C, 31, 1189, 10.1016/j.msec.2010.11.011 Beushausen, 2008, Bond strength development between concretes of different ages, Mag. Concr. Res., 60, 65, 10.1680/macr.2007.00108 Zareiyan, 2017, Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete, Autom. Constr., 83, 212, 10.1016/j.autcon.2017.08.019 Van Der Putten, 2019, Surface modification as a technique to improve inter-layer bonding strength in 3D printed cementitious materials, RILEM Tech. Lett., 4, 33, 10.21809/rilemtechlett.2019.84