Darcy–Brinkman–Forchheimer Model for Film Boiling in Porous Media
Tóm tắt
The paper presents results of the modelling of heat transfer at film boiling of a liquid in a porous medium on a vertical heated wall bordering with the porous medium. Such processes are observed at cooling of high-temperature surfaces of heat pipes, microstructural radiators etc. Heating conditions at the wall were the constant wall temperature or heat flux. The outer boundary of the vapor film was in contact with moving or stationary liquid inside the porous medium. An analytical solution was obtained for the problem of fluid flow and heat transfer using the porous medium model in the Darcy–Brinkman and Darcy–Brinkman–Forchheimer approximation. It was shown that heat transfer at film boiling in a porous medium was less intensive than in the absence of a porous medium (free fluid flow) and further decreased with the decreasing permeability of the porous medium. Significant differences were observed in frames of both models: 20% for small Darcy numbers at Da < 2 for the Darcy–Brinkman model, and 80% for the Darcy–Brinkman–Forchheimer model. In the Darcy–Brinkman model, depending on the interaction conditions at the vapor–liquid interface (no mechanical interaction or stationary fluid), a sharp decrease in heat transfer was observed for the Darcy numbers lower than five. The analytical predictions of heat transfer coefficients qualitatively agreed with the data of Cheng and Verma (Int J Heat Mass Transf 24:1151–1160, 1981) though demonstrated lower values of heat transfer coefficients for the conditions of the constant wall temperature and constant wall heat flux.
Từ khóa
Tài liệu tham khảo
Alazmi, B., Vafai, K.: Analysis of variable porosity, thermal dispersion, and local thermal non-equilibrium on free surface flows through porous media. J. Heat Transf. 126, 389–399 (2004)
Alomar, O.R., Mendes, M.A.A., Trimis, D., Ray, S.: Numerical simulation of complete liquidevapour phase change process inside porous media using smoothing of diffusion coefficient. Int. J. Therm. Sci. 86, 408–420 (2014a)
Alomar, O.R., Mendes, M.A.A., Trimis, D., Ray, S.: Simulation of complete liquid–vapor phase change inside divergent porous evaporator. Int. J. Mater. Mech. Manuf. 2(3), 223–229 (2014b)
Alomar, O.R., Mendes, M.A.A., Trimis, D., Ray, S.: Simulation of complete liquidevapour phase change process inside porous evaporator using local thermal non-equilibrium model. Int. J. Therm. Sci. 94, 228–241 (2015)
Alomar, O.R., Trimis, D., Mendes, M., Ray, S.: Numerical simulation of complete liquid–vapour phase change process inside porous media: a comparison between local thermal equilibrium and non-equilibrium models. Int. J. Therm. Sci. 112, 222–241 (2017)
Alomar, O.R., Mendes, M.A.A., Ray, S., Trimis, D.: Numerical investigation of complete evaporation process inside porous evaporator using staggered and non-staggered grid arrangements. Int. J. Therm. Sci. 129, 56–72 (2018)
Alomar, O.R., Mohammed, R.R., Mendes, M.A.A., Ray, S., Trimis, D.: Numerical investigation of two-phase flow in anisotropic porous evaporator. Int. J. Therm. Sci. 135, 1–16 (2019)
Avramenko, A.A., Shevchuk, I.V., Tyrinov, A.I., Blinov, D.G.: Heat transfer at film condensation of stationary vapor with nanoparticles near a vertical plate. Appl. Therm. Eng. 73(1), 389–396 (2014)
Avramenko, A.A., Shevchuk, I.V., Tyrinov, A.I., Blinov, D.G.: Heat transfer at film condensation of moving vapor with nanoparticles over a flat surface. Int. J. Heat Mass Transf. 82, 316–324 (2015a)
Avramenko, A.A., Shevchuk, I.V., Tyrinov, A.I., Blinov, D.G.: Heat transfer in stable film boiling of a nanofluid over a vertical surface. Int. J. Therm. Sci. 92, 106–118 (2015b)
Avramenko, A.A., Shevchuk, I.V., Harmand, S., Tyrinov, A.I.: Thermocapillary instability in an evaporating two-dimensional thin layer film. Int. J. Heat Mass Transf. 91, 77–88 (2015c)
Avramenko, A.A., Shevchuk, I.V., Abdallah, S., Blinov, D.G., Harmand, S., Tyrinov, A.I.: Symmetry analysis for film boiling of nanofluids on a vertical plate using a nonlinear approach. J. Mol. Liq. 223, 156–164 (2016)
Avramenko, A.A., Shevchuk, I.V., Moskalenko, A.A., Lohvynenko, P.N., Kovetska, YuYu.: Instability of a vapor layer on a vertical surface at presence of nanoparticles. Appl. Therm. Eng. 139, 87–98 (2018)
Bachrata, A., Fichot, F., Quintard, M., Repetto, G., Fleurot., J.: Non-local equilibrium two-phase flow model with phase change in porous media and its application to refolding of a severely damaged reactor core. In: 2012, AIP Porous Media and Its Applications in Science, Engineering and industry. AIP Conference Proceedings, 4th International Conference, pp. 147–152. Potsdam, Germany (2012)
Brahim, T., Jemni, A.: Heat pipe simulation under critical conditions. Front. Heat Pipes 3, 033003 (2012)
Bromley, L.A.: Heat transfer in stable film boiling. Chem. Eng. Prog. 46, 211–227 (1950)
Cheng, P., Verma, A.K.: The effect of subcooled liquid of film boiling about a vertical heated surface in a porous medium. Int. J. Heat Mass Transf. 24, 1151–1160 (1981)
Çengel, Y.A.: Heat Transfer: A Practical Approach. Higher Education, 2nd edn. McGraw-Hill, New York (2002)
Duval, F., Fichot, F., Quintard, M.: A local thermal non-equilibrium model for two-phase flows with phase-change in porous media. Int. J. Heat Mass Transf. 47, 613–639 (2004)
Ellion, M.E.: A study of the mechanism of boiling heat transfer. Jet Prop. Lab. Memo, CIT 20, 1–88 (1954)
Foroozesh, J., Abdalla, A.I.M., Zhang, Z.: Pore network modeling of shale gas reservoirs: gas desorption and slip flow effects. Transp. Porous Media 126(3), 633–653 (2019)
Hanlon, M.A., Ma, H.B.: Evaporation heat transfer in sintered porous media. J. Heat Transf. 125, 644–652 (2003)
Hari, R., Jolly, T., Muraleedharan, C.: Analysis of two-phase flow in the capillary wick structure of flat heat pipe with different orientation. Int. J. Therm. Technol. 5(1), 63–69 (2015)
Kamke, E.: Differentialgleichungen: Lösungsmethoden und Lösungen, I, Gewöhnliche Differentialgleichungen. B. G. Teubner, Leipzig (1977)
Kiseev, V.M.: Heat and mass transfer and phase transformations in fine-porous capillary structures, PhD Theses, Ekaterinburg (2001)
Kim, H., Buongiorno, J., Hu, L.-W., McKrell, T.: Nanoparticle deposition effects on the minimum heat flux point and quench front speed during quenching in water-based alumina nanofluids. Int. J. of Heat and Mass Transfer 53, 1542–1553 (2010)
Konovalov, D.A., Ryazhskikh, V.I., Lazarenko, I.N., Kozhukhov, N.N.: Model of cooling of compact surfaces by microchannel recuperative heat exchangers with a matrix of filamentary silicon single crystals. J. Eng. Phys. Thermophys. 92, 355–364 (2019)
Nield, D.A., Bejan, A.: Convection in Porous Media, 3rd edn. Springer, New York (2006)
Qin, X., Zhou, Y., Sasmito, A.P.: An effective thermal conductivity model for fractal porous media with rough surfaces. Adv. Geo-Energy Res. 3(2), 149–155 (2019)
Shi, J.X., Wang, J.H.: A numerical investigation of transpiration cooling with liquid coolant phase change. Transp. Porous Med. 87(3), 703–716 (2011)
Singh, H., Myong, R.S.: Critical review of fluid flow physics at micro- to nano-scale porous media, application in the energy sector. Adv. Mater. Sci. Eng. 1, 1–31 (2018)
Wang, C.Y.: A fixed-grid numerical algorithm for two-phase flow and heat transfer in porous media. Numer. Heat Transf. 32(1), 85–105 (1997)
Wang, C.Y., Beckermann, C.: A two-phase mixture model of liquid–gas flow and heat transfer in capillary porous media – l. Formulation. Int. J. Heat Mass Transf. 36(11), 2741–2758 (1993a)
Wang, C.Y., Beckermann, C.: A two-phase mixture model of liquid-gas flow and heat transfer in capillary porous media-l I. Application to pressure-driven boiling flow adjacent to a vertical heated plate. Int. J. Heat Mass Transf. 36(11), 2159–2768 (1993b)
Ward, J.C.: Turbulent flow in porous media. JSCE J. Hydraul. Div. 90(HY5), 1–12 (1964)
Xin, C., Rao, Z., You, X., Song, Z., Han, D.: Numerical investigation of vapor–liquid heat and mass transfer in porous media. Energy Convers. Manag. 78, 1–7 (2014)