Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires

Weissman, 2003, 146 The Automobile Pocket Guide, The European Automobile Manufacturers’ Association, 2015, pp. 78. European Commission, Council Directive 1999/31/EC of 26 April 1999 on the Landfill of Waste, Official Journal of the European Union; Legislation 182, vol. 42, 16 July 1999. New York State, Waste Tire Management and Recycling Act of 2003, New York, 2003. WBCSD, 2009, 18 WBCSD, 2015, 12 JATMA, 2015 Evans, 2006, Composition of a Tyre: Typical Components, 5 RMA, US Scrap Tire Management Report, Rubber Manufacturers Association, 2014, pp. 19. Secretariat of the Basel Convention, 2008, 68 Turer, 2008, Scrap tire ring as a low-cost post-tensioning material for masonry strengthening, Mater. Struct., 41, 1345, 10.1617/s11527-007-9333-y Wostowicz, 2006, Pyrolysis of scrap tires: can it be profitable?, Chem. Tech., 48 EPA, 2010, 134 Siddique, 2004, Properties of concrete containing scrap-tire rubber – an overview, Waste Manage., 24, 563, 10.1016/j.wasman.2004.01.006 Torgal, 2012, Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): an overview, Constr. Build. Mater., 30, 714, 10.1016/j.conbuildmat.2011.11.047 Thomas, 2016, A comprehensive review on the applications of waste tire rubber in cement concrete, Renewable Sustainable Energy Rev., 54, 1323, 10.1016/j.rser.2015.10.092 Eldin, 1993, Rubber-tire particles as concrete aggregate, Mater. Civ. Eng., 5, 478, 10.1061/(ASCE)0899-1561(1993)5:4(478) Najim, 2010, A review of the fresh/hardened properties and applications for plain (PRC) and self-compacting rubberised concrete (SCRC), Constr. Build. Mater., 24, 2043, 10.1016/j.conbuildmat.2010.04.056 Segre, 2000, Use of tire rubber particles as addition to cement paste, Cem. Concr. Res., 30, 1421, 10.1016/S0008-8846(00)00373-2 Guneyisi, 2010, Fresh properties of self-compacting rubberized concrete incorporated with fly ash, Mater. Struct., 43, 1037, 10.1617/s11527-009-9564-1 IWMB, 2003, 182 Centonze, 2012, Steel fibers from waste tires as reinforcement in concrete: a mechanical characterization, Constr. Build. Mater., 36, 46, 10.1016/j.conbuildmat.2012.04.088 Martinelli, 2015, An experimental study on the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete, Constr. Build. Mater., 94, 290, 10.1016/j.conbuildmat.2015.07.007 Aiello, 2009, Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength, Waste Manage., 29, 1960, 10.1016/j.wasman.2008.12.002 Caggiano, 2015, Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices, Cement Concr. Compos., 62, 146, 10.1016/j.cemconcomp.2015.04.015 Bdour, 2010, Innovative application of scrap-tire steel cords in concrete mixes, Jordan J. Civ. Eng., 4, 55 Wang, 2000, Concrete reinforcement with recycled fibers, Mater. Civ. Eng., 12, 314, 10.1061/(ASCE)0899-1561(2000)12:4(314) Papakonstantinou, 2006, Use of waste tire steel beads in Portland cement concrete, Cem. Concr. Res., 36, 1686, 10.1016/j.cemconres.2006.05.015 Graeff, 2012, Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres, Eng. Struct., 45, 385, 10.1016/j.engstruct.2012.06.030 Neocleous, 2006, Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires, Mater. Civ. Eng., 18, 677, 10.1061/(ASCE)0899-1561(2006)18:5(677) Groli, 2012, Crack width control for elements reinforced with rebars and recycled steel fibres: an experimental and theoretical study, 12 Martinelli, 2013, Numerical simulation of concrete beams reinforced with mixed recycled/industrial steel fibers, 1597 EN 12390-3, Testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens, European Standard, 2009. EN 12390-6, Testing Hardened Concrete – Part 6: Tensile Splitting Strength of Test Specimens, European Standard, 2009. RILEM Technical Committee, 1985, 50-FMC: determination of the fracture energy of mortar and concrete by means of three-point bend test on notched beams, Mater. Struct., 18, 287, 10.1007/BF02472918 EN 14651, Test Method for Metallic Fibre Concrete – Measuring the Flexural Tensile Strength (Limit of Proportionality (LOP), Residual), European Standard, 2007. Meddah, 2009, Properties of concrete reinforced with different kinds of industrial waste fibre materials, Constr. Build. Mater., 23, 3196, 10.1016/j.conbuildmat.2009.06.017 Brandt, 1993, Examples of the multicriteria optimization of cement based materials, Compos. Struct., 25, 51, 10.1016/0263-8223(93)90150-O Bayramov, 2004, Optimization of fibre reinforced concretes by means of statistical response surface method, Cem. Concr. Compos., 26, 665, 10.1016/S0958-9465(03)00161-6 Myers, 2002, 798 Cornell, 2002, 649 Smith, 2005 Sengul, 2005, Mechanical properties and rapid chloride permeabilities of concretes with ground fly ash, ACI Mater. J., 102, 414 Sengul, 2009, Compressive strength and rapid chloride permeability of concretes with ground fly ash and slag, Mater. Civ. Eng., 21, 494, 10.1061/(ASCE)0899-1561(2009)21:9(494) 2007, 130