Comparative study on direct shear behavior of manufactured and recycled shredded tyre steel fiber reinforced self-consolidating concrete

Soni, 2017, Waste pyrolysis tire oil as alternative fuel for diesel engines, Int. J. Mech. Prod. Eng. Res. Dev., 7, 271 Munnoli, 2013, ‘Utilization of rubber tyre waste in subgrade soil’, 2013, 330 Kumar, 2014, ‘Network design for reverse logistics – a case of recycling used truck tires’, Appl. Mech. Mater., 592–594, 2677, 10.4028/www.scientific.net/AMM.592-594.2677 Mehta, 2014 Kommineni, 2018, 247 Pilakoutas, 2004, Reuse of tyre steel fibres as concrete reinforcement, Eng. Sustain, 157, 131, 10.1680/ensu.2004.157.3.131 Rani, 2014, Recycling of scrap tyres, Int. J. Mater. Sci. Appl., 3, 164 Bora, 2010 Goel, 2012, Fatigue analysis of plain and fiber-reinforced self-consolidating concrete, ACI Mater. J., 109 Okamura, 2003, Self-compacting concrete, Adv. Concr. Technol., 1, 5, 10.3151/jact.1.5 Su, 2001, A simple mix design method for self-compacting concrete, Cement Concr. Res., 31, 1799, 10.1016/S0008-8846(01)00566-X Simalti, 2019, Mix proportioning of recycled steel fiber reinforced self compacting concrete, vol.35 Vilas, 2009, Mixture proportion procedure for SCC, Indian Concr. J., 35 The European Project Group, 2005, 63 Khayat, 2010, Design, production and placement of self-consolidating concrete, RILEM Bookseries, 1, 13 Sharma, 2017, Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials, J. Clean. Prod., 151, 179, 10.1016/j.jclepro.2017.03.031 Singh, 2018, vol.181, 73 Khayat, 2014, Mixture design and testing of fiber-reinforced self-consolidating concrete, ACI Mater. J., 111 Goel, 2013, Fatigue lives of self-compacting concrete and self-compacting fibre-reinforced concrete beams, vol.166, 141 Madandoust, 2015, Assessment of factors influencing mechanical properties of steel fiber reinforced self-compacting concrete, vol. 83, 284 Yehia, 2016, vol.121, 120 Mirsayah, 2002, Shear strength of steel fiber-reinforced concrete, ACI Mater. J., 99, 473 Martinelli, 2015, vol.94, 290 Onuaguluchi, 2018, Scrap tire steel fiber as a substitute for commercial steel fiber in cement mortar: engineering properties and cost-benefit analyses, Resour. Conserv. Recycl. Elsevier, 134, 248, 10.1016/j.resconrec.2018.03.014 Sengul, 2016, vol.122, 649 Hamzacebi, 2015 Skarżyński, 2018, Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography, Constr. Build. Mater., 183, 283, 10.1016/j.conbuildmat.2018.06.182 Aiello, 2009, vol.29, 1960 Neocleous, 2006, Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires, J. Mater. Civ. Eng., 18, 677, 10.1061/(ASCE)0899-1561(2006)18:5(677) Centonze, 2012, vol.36, 46 Caggiano, 2015, Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices, vol. 62, 146 Malgorzata, 2019, Concrete reinforced with various amount of steel fibers reclaimed from end-of-life tires, 262, 10003 Mastali, 2019, A comparison of the effects of pozzolanic binders on the hardened-state properties of high-strength cementitious composites reinforced with waste tire fibers, Composites Part B: Engineering, Elsevier, 162, 134, 10.1016/j.compositesb.2018.10.100 Mastali, 2018, Characterization and optimization of hardened properties of self- consolidating concrete incorporating recycled steel , industrial steel , polypropylene and hybrid fibers, vol. 151, 186 Caggiano, 2017, On the mechanical response of hybrid fiber reinforced concrete with recycled and industrial steel fibers, Constr. Build. Mater., 147, 286, 10.1016/j.conbuildmat.2017.04.160 Leone, 2018, vol.161, 141 Mastali, 2016, vol.125, 196 Frazao, 2018 Groli, 2014, Cracking performance of SCC reinforced with recycled fibres - an experimental study, Struct. Concr., 15, 136, 10.1002/suco.201300008 Alpaslan Köroğlu, 2019, Behavior of composite self-compacting concrete (SCC) reinforced with steel wires from waste tires, Revista de la construcción, 17, 484, 10.7764/RDLC.17.3.484 Khed, 2020, Development of response surface models for self-compacting hybrid fibre reinforced rubberized cementitious composite, Constr. Build. Mater., 232, 117191, 10.1016/j.conbuildmat.2019.117191 Hamza, 2018, The influence of recycled steel fibers on self-compacting concrete performance, IOP Conf. Ser. Mater. Sci. Eng., 431 Bairagi, 2001, Shear strength of fibre reinforced concrete, ICID J., 1, 47 Valle, 1993, Behavior of fiber reinforced high-strength concrete under direct shear, ACI Mater. J., 90, 122 Lavenhagen, 2012 Boulekbache, 2012, vol.27, 6 Ross, 1986, Very little is known about this process and so it is assumed that the dynamic failure mechanism in direct shear is similar to the static failure mechanism about which there is considerable information . The third re- gime is associated with the post failu, I, 1661 Bureau of Indian Standard, 2013 CSA A3000, 2018 Bureau of Indian Standard, 2016 Mastali, 2017, ‘Fresh and hardened properties of self-compacting concrete reinforced with hybrid recycled steel–polypropylene fiber’, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0001851 Hu, 2016, Mechanical properties of sfrc using blended recycled tyre steel cords (rtsc) and recycled tyre steel fibres (RTSF), Constr. Build. Mater., 187, 553, 10.1016/j.conbuildmat.2018.07.206 Kurup, 2017, Effect of recycled PVC fibers from electronic waste and silica powder on shear strength of concrete, J. Hazard. Toxic, Radioact. Waste, 21, 10.1061/(ASCE)HZ.2153-5515.0000354 Senthil Kumar, 2014, Briefing: shear strength of concrete with E-waste plastic, Proc. Inst. Civ. Eng. Constr. Mater., 168, 53, 10.1680/coma.14.00044 Maroliya, 2013, Behaviour of reactive powder concrete in direct shear, IOSR J. Eng., 76 Sivaraja, 2010, Potentialreuse of waste rice husk as fibre composites in concrete, Asian. J. Civ. Eng., 12, 205 Mehta, 1982, Properties of Portland cement concrete containing fly ash and condensed silica-fume, Cement Concr. Res., 12, 587, 10.1016/0008-8846(82)90019-9 Marar, 2017, The influence of amount and aspect ratio of fibers on shear behaviour of steel fiber reinforced concrete, KSCE. J. Civ. Eng., 21, 1393, 10.1007/s12205-016-0787-2 Al-Kamyani, 2018, vol.189, 1007 Zamanzadeh, 2015, vol.85, 195 Khanlou, 2012, Shear performance of steel fibre-reinforced concrete, vol. 8 Abdi Moghadam, 2019, vol.215, 207 Rao, 2010, Toughness indices of fiber reinforced concrete subjected to mode II loading, Recent Adv. Fract. Mech. Concr., 112 Khanlou, 2012, Shear performance of steel fibre-reinforced concrete, 1, 8