Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer

Norajitra, 2005, Status of He-cooled divertor development for DEMO, Fusion Eng. Des., 75-79, 307, 10.1016/j.fusengdes.2005.06.159 Gervash, 2007, Fabrication of a He-cooled divertor module for DEMO reactor, J. Nucl. Mater., 367-370, 1472, 10.1016/j.jnucmat.2007.04.017 Norajitra, 2007, Development of a helium-cooled divertor: material choice and technological studies, J. Nucl. Mater., 367-370, 1416, 10.1016/j.jnucmat.2007.04.027 Kalin, 2004, Development of rapidly quenched brazing foils to join tungsten alloys with ferritic steel, J. Nucl. Mater., 329-333, 1544, 10.1016/j.jnucmat.2004.04.170 Kalin, 2007, Development of brazing foils to join monocrystalline tungsten alloys with ODS-EUROFER steel, J. Nucl. Mater., 367-370, 1218, 10.1016/j.jnucmat.2007.03.222 Greuner, 2005, Vacuum plasma-sprayed tungsten on EUROFER and 316L: Results of characterization and thermal loading tests, Fusion Eng. Des., 75-79, 333, 10.1016/j.fusengdes.2005.06.240 Hirose, 2006, Joining technologies of reduced activation ferritic/martensitic steel for blanket fabrication, Fusion Eng. Des., 81, 645, 10.1016/j.fusengdes.2005.07.015 Kundu, 2006, Interfacial microstructure and mechanical properties of diffusion-bonded titanium–stainless steel joints using a nickel interlayer, Mater. Sci. Eng. A, 425, 107, 10.1016/j.msea.2006.03.034 Xu, 1991, Pressure-assisted reaction bonding between W and Si80Ge20 alloy with Ni as the interlayer, J. Appl. Phys., 69, 4292, 10.1063/1.348402 Batra, 2004, Diffusion bonding of a Cu–Cr–Zr alloy to stainless steel and tungsten using nickel as an interlayer, Mater. Sci. Eng. A, 369, 119, 10.1016/j.msea.2003.10.296 Zhong, 2009, Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer, Mater. Sci. Eng. A, 518, 167, 10.1016/j.msea.2009.04.043 Yu, 1987 Yu, 1987 Conzone, 1997, Joining MoSi2 to 316L stainless steel, J. Mater. Sci., 32, 3369, 10.1023/A:1018656313605 Miranzo, 2004, Mechanical properties of the Ni filler metal layer in Si3N4 joints measured by nanoindentation, Surf. Interface Anal., 36, 649, 10.1002/sia.1912 Zhang, 2001, Distribution of the composition and micromechanical properties of Be/316L stainless steel following diffusion bonding, Surf. Interface Anal., 32, 88, 10.1002/sia.1012 Suzuki, 2006, First wall and divertor engineering research for power plant in JAERI, Fusion Eng. Des., 81, 93, 10.1016/j.fusengdes.2005.08.030