Bench-scale assessment of combustion toxicity—A critical analysis of current protocols

Purser, 2000, Toxic product yields and hazard assessment for fully enclosed design fires, Poly Int, 49, 1232, 10.1002/1097-0126(200010)49:10<1232::AID-PI543>3.0.CO;2-T ISO TS 19706. Guidelines for assessing the fire threat to people, 2004. ISO 13344. Estimation of the lethal toxic potency of fire effluents, 2004. ISO/TS 13571. Life-threatening components of fire—guidelines for the estimation of time available for escape using fire data, 2002. Kaplan, 1987, Effects of irritant gases on avoidance/escape performance and respiratory response of the baboon, Toxicology, 47, 165, 10.1016/0300-483X(87)90166-1 Hull, 2000, Prediction of CO evolution from small-scale polymer fires, Polym Int, 49, 1259, 10.1002/1097-0126(200010)49:10<1259::AID-PI573>3.0.CO;2-D ISO 16312-1. Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment—part 1: Criteria, 2006. Tewarson A. Generation of heat and Chemical compounds in fires. SFPE handbook of fire protection engineering, 3rd ed., 2002. p. 3–82. Purser DA. Toxicity assessment of combustion products. SFPE handbook of fire protection engineering. 3rd ed., 2002. p. 2–117. 2000 Fire and polyvinyl chloride. USA: Vinyl Institute, Society of the Plastics Industry; 1992. Parent, 1979, Acute toxicity in Fischer rats of smoke from non-flaming combustion of ten flexible polyurethane foams, J Combust Toxicol, 6, 155 ISO 19701. Methods for sampling and analysis of fire effluents, 2005. ISO 19702. Toxicity testing of fire effluents—guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis, 2006. Council Directive 86/609/EEC of 24 November 1986 on the approximation of laws, regulations and administrative provisions of the Member States regarding the protection of animals used for experimental and other scientific purposes. Låstbom, 1997, Pharmacol Toxicol, 81, 85, 10.1111/j.1600-0773.1997.tb00036.x Paul, 1989, Feasibility study to demonstrate the potential of smoke hoods in simulated aircraft fire atmospheres: development of the fire model, Fire Mater, 14, 43, 10.1002/fam.810140203 Metcalf, 1991, The thermo-oxidative degradation of PTFE in the NIST cup furnace toxicity test, Fire Mater, 15, 53, 10.1002/fam.810150203 Purser, 1982, Biological effects of combustion atmospheres, J Fire Sci, 1, 118, 10.1177/073490418300100204 Rossi, 1998, Tissue distribution, metabolism, and clearance of the convulsant trimethylol propane phosphate in rats, Drug metabol Disposal, 26, 1058 Prager, 2006 Organisation for Economic Collaboration and Development (OECD) Test Guideline 403. Acute inhalation toxicity testing. Kaplan, 1983 Packham SC. In: 17th annual cellular plastics conference on safety and product liability. Washington, DC, USA, 1984. Pauluhn, 2004, Toxicity of fire effluents Hartzell GE, Grand AF, Switzer WG. Toxicity of smoke containing HCl. In: Nelson GL, editor. Fire and polymers: hazards identification and prevention, ACS Symposium Series 425. Washington, DC: American Chemical Society: 1990. p. 12–20. IMO MSC.41(64). Interim standard for measuring smoke and toxic products of combustion. International Maritime Organisation. ASTM E1678. Standard method for measuring smoke toxicity for use in fire hazard analysis. ASTM E 662. Test for specific optical density of smoke generated by solid materials. ISO 5659-2. Plastics—Smoke generation—part 2, determination of specific optical density. BS 6853, Code of practice for fire precautions in the design and construction of passenger carrying trains, Annex B. Babrauskas, 1998, Fire Safety J, 31, 345, 10.1016/S0379-7112(98)00013-7 NBS (now NIST) test method for assessing the acute inhalation toxicity of combustion products. NBSIR 2689. An inter-laboratory evaluation of the 1980 method. DEF-STAN 02—713 (NES 713). Determination of the toxicity index of the products of combustion from small pieces of material. Israel Standard SI-755. Behaviour of building materials during fire—test methods and classification. Tel-Aviv: The Standards Institution of Israel; 1998. Gost 12.1012. UDSSR Imo Standard Fb/353, Toxic potency of effluents. 1984. NFX 70-100. Analysis of pyrolysis and combustion gases. Tube furnace method. Part 1, methods of analysis of gas generated by thermal degradation. Part 2, method of thermal degradation using tube furnace. NFF 16-101. Railway rolling stock, fire behaviour, choice of materials. 1988. NATO AFAP-3. Allied Fire Assessment Publications, reaction to fire tests for materials. Toxicity of fire effluents. Le Tallec Y, Smith D, Hunter J, Groenevald FR. Evaluation of toxicants for materials used in military vehicles and equipment. Interflam. Edinburgh: Interscience Publications; July 2000. BS 7990: 2003. Tube furnace method for the determination of toxic products yields in for effluents. ISO TS 19700: 2006. Controlled equivalence ratio method for the determination of hazardous components of fire effluents, 2006. DIN 53 436. Erzeugung thermischer Zersetzungsprodukte von Werkstoffen unter Luftzufuhr und ihre toxikologische Prufung. Part 1, April 1981, Zersetzungsgerat und Bestimnmng der versuchstemperatur. Part 2. August 1986. Verfahren zur thermischen Zersetzung. Part 3. Draft August 1986- Verfahren zur inhalationstoxikologischen Untersuchung thermischer Zersetzungsprodukte. Klimisch, 1980, Generation of constant concentrations of thermal decomposition products in inhalation chambers. A comparative study with a method according to DIN 53436.1. Measurement of carbon monoxide and carbon dioxide in inhalation chambers, J Combust Toxicol, 7, 243 PN-88/B-02855. Fire protection of buildings. Method for testing emission of toxic products of decomposition and combustion of materials. GA 132. Smoke and toxicity of fire effluents, 1996. Barrow, 1976, Sensory irritation evoked by thermal decomposition products of plasticized polyvinyl chloride, Fire Mater, 1, 147, 10.1002/fam.810010405 JIS A 1321. Semi-non-combustible and fire retarded building materials conforming to the Building Standards Law. Notification No. 1231 of the Ministry of Construction, Japan, 25 August 1976; Saito, F., Toxicity test for fire resistive materials in Japan. J Combust Toxicol 1982;9:194–205. ISO 5660-1. Fire tests—reaction to fire—part 1: rate of heat release from building products (cone calorimeter method), 1993. ISO 5660-2. Reaction-to-fire tests—heat release, smoke production and mass loss rate—part 2: Smoke production rate (dynamic measurement), 2002. E 2058—02a. Standard test methods for measurement of synthetic polymer material flammability using a fire propagation apparatus (FPA). ASTM; 2002. Tsuchiya, 1972, J Fire Flammability, 3, 46 ISO 13943. Fire safety. Vocabulary, 2000. International Consensus Report: Isocyanates—risk assessment and management. Hotel Norge Hoesbjoer, Norway, November 2001. Nevaiser, 2004, Evaluation of toxic potency values for smoke from products and materials, Fire Technol, 40, 177, 10.1023/B:FIRE.0000016842.67144.12 Klimisch, 1980, Comparative measurements of the toxicity to laboratory animals of products of thermal decomposition generated by the method of DIN 53436, J Combust Toxocol, 7, 209 Pauluhn, 1993, A retrospective analysis of predicted and observed smoke lethal toxic potency values, J Fire Sci, 11, 109, 10.1177/073490419301100201 Sarkos, 1979, Laboratory testing of cabin materials used in commercial aircraft, J Aircraft, 16, 78, 10.2514/3.58488 Tewarson, 1993, Ventilation controlled combustion of polymers, Combust Flame, 95, 151, 10.1016/0010-2180(93)90058-B Blomqvist, 2001, Characterization of the combustion products in large-scale fire tests: comparison of three experimental configurations, Fire Mater, 25, 71, 10.1002/fam.761 Andersson, 2005, Combustion products generated by hetero-organic fuels on four different test scales, Fire Safety J, 40, 439, 10.1016/j.firesaf.2005.03.002 Hull TR, Lebek K, Stec AA, Paul KT, Price D. Bench scale assessment of fire toxicity. In: Schartel B, editor. Advances in the flame retardancy of polymeric materials: current perspectives. Presented at FRPM’05, Berlin, 2007 [in press]. Hietaniemi, 1999, Burning characteristics of selected substances: production of heat, smoke and chemical species, Fire Mater, 23, 171, 10.1002/(SICI)1099-1018(199907/08)23:4<171::AID-FAM680>3.0.CO;2-C