Sensitivity analysis of biomass pyrolysis for renewable fuel production using Aspen Plus

Rosha, 2018, Influence of gaseous fuel induction on the various engine characteristics of a dual fuel compression ignition engine: a review, Renew Sustain Energy Rev, 82, 3333, 10.1016/j.rser.2017.10.055 Vikram, 2021, Recent modeling approaches to biomass pyrolysis: a review, Energy Fuels, 35, 7406, 10.1021/acs.energyfuels.1c00251 Rosha, 2019, Hydrogen enrichment of biogas via dry and autothermal-dry reforming with pure nickel (Ni) nanoparticle, Energy, 172, 733, 10.1016/j.energy.2019.02.006 Rosha, 2018, Optimization of hydrogen enriched biogas by dry oxidative reforming with nickel nanopowder using response surface methodology, Energy Fuels, 32, 6995, 10.1021/acs.energyfuels.8b00819 Serrano-Ruiz, 2011, Transformations of biomass-derived platform molecules: from high added-value chemicals to fuels via aqueous-phase processing, Chem Soc Rev, 40, 5266, 10.1039/c1cs15131b Ardebili, 2020, Green electricity generation potential from biogas produced by anaerobic digestion of farm animal waste and agriculture residues in Iran, Renew Energy, 154, 29, 10.1016/j.renene.2020.02.102 Rosha, 2021, Recent advances in biogas upgrading to value added products: a review, Int J Hydrogen Energy, 46, 21318, 10.1016/j.ijhydene.2021.03.246 Ardebili, 2020, An assessment of feasibility and potential of gaseous biofuel production from agricultural/animal wastes: a case study, Biomass Convers Biorefinery Rosha, 2018, Biogas reforming for hydrogen enrichment by ceria decorated over nickel catalyst supported on titania and alumina, Int J Hydrogen Energy, 43, 21246, 10.1016/j.ijhydene.2018.09.187 Ronsse, 2013, Production and characterization of slow pyrolysis biochar: influence of feedstock type and pyrolysis conditions, GCB- Bioenergy, 5, 104, 10.1111/gcbb.12018 Ranzi, 2008, Chemical kinetics of biomass pyrolysis, Energy Fuels, 22, 4292, 10.1021/ef800551t Miandad, 2016, Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil, Waste Manag, 58, 250, 10.1016/j.wasman.2016.09.023 Aboulkas, 2010, Thermal degradation behaviors of polyethylene and polypropylene. Part I: pyrolysis kinetics and mechanisms, Energy Convers Manag, 51, 1363, 10.1016/j.enconman.2009.12.017 Czernik, 2004, Overview of applications of biomass fast pyrolysis oil, Energy Fuels, 18, 590, 10.1021/ef034067u Conrad, 2019, Comparison of fast pyrolysis bio-oils from straw and miscanthus, Environ Prog Sustain Energy, 38, 10.1002/ep.13287 Xiu, 2012, Bio-oil production and upgrading research: a review, Renew Sustain Energy Rev, 16, 4406, 10.1016/j.rser.2012.04.028 Zhang, 2007, Review of biomass pyrolysis oil properties and upgrading research, Energy Convers Manag, 48, 87, 10.1016/j.enconman.2006.05.010 Syamsiro, 2014, Fuel oil production from municipal plastic wastes in sequential pyrolysis and catalytic reforming reactors, Energy Proc, 4, 180, 10.1016/j.egypro.2014.01.212 Sbaaei, 2018, Predictive modeling and optimization for an industrial Coker Complex Hydrotreating unit-development and a case study, Fuel, 212, 61, 10.1016/j.fuel.2017.10.032 Ma, 2021, Kinetic study of carbonaceous deposit formation and catalyst deactivation in hydrotreating of fast pyrolysis bio-oil, Chem Eng Sci, 231, 116316, 10.1016/j.ces.2020.116316 Ayanoglu, 2016, Production of gasoline and diesel like fuels from waste tire oil by using catalytic pyrolysis, Energy, 103, 456, 10.1016/j.energy.2016.02.155 Wang, 2020, High-performance nano-structured Ni based catalysts for high-temperature CO2-CH4 reforming-Greenhouse gases to syngas, Catal Today, 339, 344, 10.1016/j.cattod.2019.06.040 Chen, 2015, Biogas dry reforming for syngas production: catalytic performance of nickel supported on waste-derived SiO2, Catal Sci Technol, 5, 860, 10.1039/C4CY01126K Mutlu, 2020, Challenges and opportunities of modeling biomass gasification in aspen Plus: a review, Chem Eng Technol, 43, 1674, 10.1002/ceat.202000068 Humbird, 2017, One-dimensional biomass fast pyrolysis model with reaction kinetics integrated in an aspen Plus biorefinery process model, ACS Sustain Chem Eng, 5, 2463, 10.1021/acssuschemeng.6b02809 Qiang, 2009, Overview of fuel properties of biomass fast pyrolysis oils, Energy Convers Manag, 50, 1376, 10.1016/j.enconman.2009.01.001 Park, 2019, Influence of operating conditions for fast pyrolysis and pyrolysis oil production in a conical spouted-bed reactor, Chem Eng Technol, 42, 2493, 10.1002/ceat.201900082 Babu, 2003, Modeling, simulation and estimation of optimum parameters in pyrolysis of biomass, Energy Convers Manag, 44, 2135, 10.1016/S0196-8904(02)00237-6 Sun, 2019, Influence of different pyrolysis temperatures on eight elements content of biochar, J Fujian Normal Univ (Nat Sci Ed), 35, 55 Sakhiya AK, Anand A, Kaushal P. Production, activation, and applications of biochar in recent times. Biochar 2020;2:253-285. Boroson, 1989, Product yields and kinetics from the vapor phase cracking of wood pyrolysis tars, AIChE J, 35, 120, 10.1002/aic.690350113 Patel, 2016, Production of renewable diesel through the hydroprocessing of lignocellulosic biomass-derived bio-oil: a review, Renew Sustain Energy Rev, 58, 1293, 10.1016/j.rser.2015.12.146 Brunetti, 2012, Medium/high temperature water gas shift reaction in a Pd-Ag membrane reactor: an experimental investigation, RSC Adv, 2, 226, 10.1039/C1RA00569C Han, 2009, Hydrotreatment of pyrolysis bio-oil: a review, Fuel Process Technol, 195, 106140, 10.1016/j.fuproc.2019.106140 Houston, 2019, Intermediate temperature water-gas shift kinetics for hydrogen production, React Chem Eng, 4, 1814, 10.1039/C9RE00121B