Modeling 3D crack propagation in unreinforced concrete using PUFEM

Alfaiate, 2002, On the use of embedded discontinuity elements with crack path continuity for mode-I and mixed-mode fracture, Engrg. Fract. Mech., 69, 661, 10.1016/S0013-7944(01)00108-4 Armero, 1995, Recent advances in the analysis and numerical simulation of strain localization in inelastic solids, 547 Armero, 1996, An analysis of strong discontinuities in multiplicative finite strain plasticity and their relation with the numerical simulation of strain localization in solids, Int. J. Solids and Structures, 33, 2863, 10.1016/0020-7683(95)00257-X M. Arrea, A.R. Ingraffea, Mixed mode crack propagation in mortar and concrete, Technical Report 81–113, Department of Structural Engineering, School of Civil and Environmental Engineering, Cornell University, 1982 Barenblatt, 1962, The mathematical theory of equilibrium of cracks in brittle fracture, Adv. Appl. Mech., 7, 55, 10.1016/S0065-2156(08)70121-2 Bathe, 1996 Baz̆ant, 1988, Nonlocal continuum damage, localization instability and convergence, J. Appl. Mech., 55, 287, 10.1115/1.3173674 Belytschko, 1988, A finite element with embedded localization zones, Comput. Methods Appl. Mech. Engrg., 70, 59, 10.1016/0045-7825(88)90180-6 Bhattacharjee, 1994, Application of NLFM models to predict cracking in concrete gravity dams, J. Struct. Engrg., ASCE, 120, 1255, 10.1061/(ASCE)0733-9445(1994)120:4(1255) Chaboche, 1997, On the interface debounding models, Int. J. Damage, 6, 220, 10.1177/105678959700600302 E.W.V. Chaves, A three dimensional setting for strong discontinuities modelling in failure mechanics, Ph.D. Thesis, Escuela Tcnica Superior de Ingenieros de Caminos, Universidad Politcnica de Catalua, Spain, 2003 Coleman, 1963, The thermodynamics of elastic materials with heat conduction and viscosity, Arch. Ration. Mech. Anal., 13, 167, 10.1007/BF01262690 de Borst, 2001, Some recent issues in computational failure mechanics, Int. J. Numer. Methods Engrg., 52, 63, 10.1002/nme.272 de Borst, 1993, Fundamental issues in finite element analysis of localization of deformation, Engrg. Comput., 10, 99, 10.1108/eb023897 Dugdale, 1960, Yielding of steel sheets containing slits, J. Mech. Phys. Solids, 8, 100, 10.1016/0022-5096(60)90013-2 Durate, 1996, H-p clouds—an h-p meshless method, Numer. Methods Part. Diff. Equat., 12, 673, 10.1002/(SICI)1098-2426(199611)12:6<673::AID-NUM3>3.0.CO;2-P Etse, 1998, Finite element analysis of failure response behavior of anchor bolts in concrete, Nucl. Engrg. Design, 179, 245, 10.1016/S0029-5493(97)00264-1 Gasser, 2003, Geometrically non-linear and consistently linearized embedded strong discontinuity models for 3d problems with an application to the dissection analysis of soft biological tissues, Comput. Methods Appl. Mech. Engrg., 192, 5059, 10.1016/j.cma.2003.06.001 Gasser, 2003, Necking phenomena of a fiber-reinforced bar modeled by multisurface plasticity, 211 Geers, 2000, Damage and crack modeling in single-edge and double-edge notched beams, Engrg. Fract. Mech., 65, 247, 10.1016/S0013-7944(99)00118-6 Gravouil, 2002, Non-planar 3D crack growth by the extended finite element and level sets—Part II: level set update, Int. J. Numer. Methods Engrg., 53, 2569, 10.1002/nme.430 Hillerborg, 1976, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement Concr. Res., 6, 773, 10.1016/0008-8846(76)90007-7 Holzapfel, 2000 Jirásek, 2000, Comparative study on finite elements with embedded discontinuities, Comput. Methods. Appl. Mech. Engrg., 188, 307, 10.1016/S0045-7825(99)00154-1 Jirasek, 2002, Consistent tangent stiffness for nonlocal damage models, Comput. Struct., 80, 1279, 10.1016/S0045-7949(02)00078-0 Jirásek, 2001, Embedded crack model: part II. Combination with smeared cracks, Int. J. Numer. Methods Engrg., 50, 1291, 10.1002/1097-0207(20010228)50:6<1291::AID-NME12>3.0.CO;2-Q H. Krenchel, J.A. Bickley, Pullout testing of concrete, Historical background and scientific level today. Technical Report 6, The Nordic Concrete Federation, Nordic Concrete Research, 1985 R. de Borst, Non-Linear analysis of frictional materials, Ph.D. Thesis, Delft University of Technology, Netherlands, 1986 Melenk, 1996, The partition of unity finite element method: basic theory and applications, Comput. Methods Appl. Mech. Engrg., 139, 289, 10.1016/S0045-7825(96)01087-0 Moës, 1999, A finite element method for crack growth without remeshing, Int. J. Numer. Methods Engrg., 46, 131, 10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J Moës, 2002, Non-planar 3D crack growth by the extended finite element and level sets—part I: mechanical model, Int. J. Numer. Methods Engrg., 53, 2549, 10.1002/nme.429 Needleman, 1987, A continuum model for void nucleation by inclusion debonding, J. Appl. Mech., 54, 525, 10.1115/1.3173064 Needleman, 1990, An analysis of decohesion along an imperfect interface, Int. J. Fract., 42, 21, 10.1007/BF00018611 Nguyen, 2001, A cohesive model for fatigue crack growth, Int. J. Fract., 110, 351, 10.1023/A:1010839522926 Oliver, 1995, Continuum modelling of strong discontinuities in solid mechanics, 455 Oliver, 2000, On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations, Int. J. Solids Struct., 37, 7207, 10.1016/S0020-7683(00)00196-7 Oliver, 1999, Strong discontinuities and continuum plasticity models: the strong discontinuity approach, Int. J. Plast., 15, 319, 10.1016/S0749-6419(98)00073-4 Oliver, 2002, From continuum mechanics to fracture mechanics: the strong discontinuity approach, Engrg. Fract. Mech., 69, 113, 10.1016/S0013-7944(01)00060-1 Ortiz, 1987, A finite element method for localized failure analysis, Comput. Methods Appl. Mech. Engrg., 61, 189, 10.1016/0045-7825(87)90004-1 Ortiz, 1999, Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, Int. J. Numer. Methods Engrg., 44, 1267, 10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7 Papoulia, 2003, Time continuity in cohesive finite element modeling, Int. J. Numer. Methods Engrg., 58, 679, 10.1002/nme.778 Reinhardt, 1986, Tensile tests and failure analysis of concrete, J. Struct. Engrg., ASCE, 112, 2462, 10.1061/(ASCE)0733-9445(1986)112:11(2462) J.G. Rots, Computational modeling of concrete fracture, Ph.D. Thesis, Delft University of Technology, Netherlands, 1988 Rots, 1989, Crack models for concrete: discrete or smeared? Multi-directional or rotating?, Heron, 34, 1 Rots, 1987, Analysis of mixed-mode fracture in concrete, J. Engrg. Mech., 113, 1739, 10.1061/(ASCE)0733-9399(1987)113:11(1739) Rots, 1985, Smeared crack approach and fracture localization in concrete, Heron, 30, 1 E. Schlangen, Experimental and numerical analysis of fracture processes in concrete, Ph.D. Thesis, Delft University of Technology, Netherlands, 1993 J. Schöberl, NETGEN—A 3D tetrahedral mesh generator—Version 4.2, University Linz, Austria, 2002 Simo, 1998 Simo, 1994, A new approach to the analysis and simulation of strain softening in solids, 25 Simo, 1990, A class of mixed assumed strain methods and the method of incompatible modes, Int. J. Numer. Methods Engrg., 29, 1595, 10.1002/nme.1620290802 Sluys, 1998, Discontinuous failure analysis for mode-I and mode-II localization problems, Int. J. Solids Struct., 35, 4257, 10.1016/S0020-7683(97)00313-2 Spencer, 1971, Theory of invariants, vol. 1 Spencer, 1984, Constitutive theory for strongly anisotropic solids, 1 Steinmann, 1997, On the localization properties of multiplicative hyperelasto-plastic continua with strong discontinuities, Int. J. Solids Struct., 34, 969, 10.1016/S0020-7683(96)00043-1 Sukumar, 2003, Brittle fracture in polycrystalline microstructures with the extended finite element method, Int. J. Numer. Methods Engrg., 56, 2015, 10.1002/nme.653 R.L. Taylor, FEAP—A Finite Element Analysis Program—Version 7.1, University of California at Berkeley, 1999 R.L. Taylor, FEAP—A Finite Element Analysis Program—Version 7.3, University of California at Berkeley, 2000 Tvergaard, 1992, The relation between crack growth resistance and fracture process parameters in elastic–plastic solids, J. Mech. Phys. Solids, 40, 1377, 10.1016/0022-5096(92)90020-3 G.N. Wells, Discontinuous modelling of strain localization and failure, Ph.D. Thesis, Delft University of Technology, Netherlands, 2001 Wells, 2002, A consistent geometrically non-linear approach for delamination, Int. J. Numer. Methods Engrg., 54, 1333, 10.1002/nme.462 Wells, 2001, A new method for modelling cohesive cracks using finite elements, Int. J. Solids Struct., 50, 2667 Wells, 2001, Three-dimensional embedded discontinuity model for brittle fracture, Int. J. Solids Struct., 38, 897, 10.1016/S0020-7683(00)00029-9 Zienkiewicz, 2000, vol. 1