Electrification of roads: Opportunities and challenges

Chan, 2002, The state of the art of electric and hybrid vehicles, Proc IEEE, 90, 247, 10.1109/5.989873 World Commission on Environment and Development. Our common future. Oxford: Oxford University Press, 1987. International Energy Agency. Transport Energy and CO2: Moving Towards Sustainability. OECD Publishing, 2009. Tanaka N. Technology roadmap: Electric and plug-in hybrid electric vehicles. International Energy Agency, Tech. Rep, 2011. Ibrahim, 2008, Energy storage systems—characteristics and comparisons, Renew Sustain Energy Rev, 12, 1221, 10.1016/j.rser.2007.01.023 Luo, 2015, Overview of current development in electrical energy storage technologies and the application potential in power system operation, Appl Energy, 137, 511, 10.1016/j.apenergy.2014.09.081 Thomas, 2009, Fuel cell and battery electric vehicles compared, Int J Hydrogen Energy, 34, 6005, 10.1016/j.ijhydene.2009.06.003 Thomas, 2009, Transportation options in a carbon-constrained world: Hybrids, plug-in hybrids, biofuels, fuel cell electric vehicles, and battery electric vehicles, Int J Hydrogen Energy, 34, 9279, 10.1016/j.ijhydene.2009.09.058 Veziroglu, 2011, Fuel cell vehicles: state of the art with economic and environmental concerns, Int J Hydrogen Energy, 36, 25, 10.1016/j.ijhydene.2010.08.145 Eberle, 2010, Sustainable transportation based on electric vehicle concepts: a brief overview, Energy Environ Sci, 3, 689, 10.1039/c001674h Scrosati, 2010, Lithium batteries: status, prospects and future, J Power Sources, 195, 2419, 10.1016/j.jpowsour.2009.11.048 Tie, 2013, A review of energy sources and energy management system in electric vehicles, Renew Sustain Energy Rev, 20, 82, 10.1016/j.rser.2012.11.077 Hadjipaschalis, 2009, Overview of current and future energy storage technologies for electric power applications, Renew Sustain Energy Rev, 13, 1513, 10.1016/j.rser.2008.09.028 Gerssen-Gondelach, 2012, Performance of batteries for electric vehicles on short and longer term, J Power Sources, 212, 111, 10.1016/j.jpowsour.2012.03.085 Gutmann, 2009, Electrical vehicle: batteries, Encyclopedia Electrochemical Power Sources, 219, 10.1016/B978-044452745-5.00087-3 Chen, 2009, Progress in electrical energy storage system: a critical review, Prog Nat Sci, 19, 291, 10.1016/j.pnsc.2008.07.014 Cairns, 2004, Batteries, overview, Encyclopedia Energy, 1, 117, 10.1016/B0-12-176480-X/00109-1 Beck, 2000, Rechargeable batteries with aqueous electrolytes, Electrochim Acta, 45, 2467, 10.1016/S0013-4686(00)00344-3 Lu, 2013, A review on the key issues for lithium-ion battery management in electric vehicles, J Power Sources, 226, 272, 10.1016/j.jpowsour.2012.10.060 Consultants RBS. Global Automotive Li-ion battery Market Study-UPDATE. Roland Berger. 2012. Vikström, 2013, Lithium availability and future production outlooks, Appl Energy, 110, 252, 10.1016/j.apenergy.2013.04.005 Siemens. Elektromote. <http://www.siemens.com/history/en/innovations/transportation.htm#toc-2> [accessed 10.01.14]. Brunton, 1992, The trolleybus story, IEE Review, 38, 57, 10.1049/ir:19920024 Berman N. Roadway vehicle: U.S. Patent 4,129,203. 1978-12-12. Rynbrandt J D. Electric car and roadway system: U.S. Patent 4,476,947. 1984-10-16. Hennessey MP, Donath M. Evaluation of the E-TRAN vehicle propulsion concept, 1994. SIMENS, eHighway concept. <http://www.mobility.siemens.com/mobility/global/en/interurban-mobility/road-solutions/electric-powered-hgv-traffic-eHighway/the-ehighway-concept/Pages/the-ehighway-concept.aspx#Pantographs> [accessed 19.02.15]. Viktoria Swedish ICT. Slide-in Electric Road System. <https://www.viktoria.se/publications/Slide-in-ERS-Conductive-project-report> [accessed 19.02.15]. Post RC. Urban mass transit: the life story of a technology. Greenwood Publishing Group, 2007. 2010 Foley AM, Winning IJ, Gallachoir BPO. State-of-the-art in electric vehicle charging infrastructure. Vehicle Power and Propulsion Conference (VPPC), 2010 IEEE. IEEE, 2010. P. 1–6. Brooker A, Thornton M, Rugh J. Technology improvement pathways to cost-effective vehicle electrification: Preprint, 2010. Wu, 2011, A review on inductive charging for electric vehicles. Electric Machines & Drives Conference (IEMDC), IEEE Int, IEEE, 2011, 143 Musavi F, Edington M, Eberle W. Wireless power transfer: a survey of EV battery charging technologies. Energy Conversion Congress and Exposition (ECCE), 2012 IEEE. IEEE, 2012. p. 1804–10. Tesla N. The transmission of electrical energy without wires. Electrical World and Engineer, 1904. p. 1. Abe, 2000, A noncontact charger using a resonant converter with parallel capacitor of the secondary coil, Ind Appl, IEEE Trans, 36, 444, 10.1109/28.833760 Chawla N, Tosunoglu S. State of the Art in Inductive Charging for Electronic Appliances and its Future in Transportation. Proc. Conf. on Recent Advances in Robotics, 2012. Villa, 2007, Practical development of a 5 kW ICPT system SS compensated with a large air gap[C]//Industrial Electronics, 2007, IEEE Int Symp, IEEE, 2007, 1219 Wu, 2012, A high efficiency 5 kW inductive charger for EVs using dual side control, Ind Inform, IEEE Trans, 8, 585, 10.1109/TII.2012.2192283 Onar OC, Miller JM, Campbell SL, et al. A novel wireless power transfer for in-motion EV/PHEV charging. Applied Power Electronics Conference and Exposition (APEC), 2013 Twenty-Eighth Annual IEEE. IEEE, 2013. p. 3073–80. Onar OC, Miller JM, Campbell SL, et al. Oak ridge national laboratory wireless power transfer development for sustainable campus initiative. Transportation Electrification Conference and Expo (ITEC), 2013 IEEE. IEEE, 2013. p. 1–8. Zell CE, Bolger JG. Development of an engineering prototype of a roadway powered electric transit vehicle system: A public/private sector program. Vehicular Technology Conference, 1982. 32nd IEEE. IEEE, vol. 32, 1982. p. 435–38. Tseng LY, Tseng D. Inductive charging of a moving electric vehicle’s battery: U.S. Patent 5,311,973. 1994-5-17. Schwind JP. Armature induction charging of moving electric vehicle batteries: U.S. Patent 5,821,728. 1998-10-13. Ross HR. Roadway-powered electric vehicle system having automatic guidance and demand-based dispatch features: U.S. Patent 6,421,600. 2002-7-16. California Partners for Advanced Transit and Highways (PATH). Roadway powered electric vehicle project track construction and testing program phase. PATH, 1994. Lee S, Huh J, Park C, et al. On-line electric vehicle using inductive power transfer system. Energy Conversion Congress and Exposition (ECCE), 2010 IEEE. IEEE, 2010. p. 1598–1601. Suh NP, Cho DH, Rim CT. Design of on-line electric vehicle (OLEV). Global Product Development. Springer Berlin Heidelberg, 2011. p. 3–8. Flanders Drive. Inductive charging applications for electric vehicles. <http://www.flandersdrive.be/en/projects/inductive-charging> [accessed 10.01.14]. Swedish ICT Viktoria. Slide-in Electric Road System-Inductive project report. Project report, Phase 1. <https://www.viktoria.se/publications/Slide-in-ERS-Inductive-project-report> [accessed 10.04.14]. Feasibility analysis and development of on-road charging solutions for future electric vehicles (FABRIC). <http://www.fabric-project.eu/> [accessed 19.02.15]. Brown, 1996, The history of wireless power transmission, Sol Energy, 56, 3, 10.1016/0038-092X(95)00080-B Kurs, 2007, Wireless power transfer via strongly coupled magnetic resonances, Science, 317, 83, 10.1126/science.1143254 Cannon, 2009, Magnetic resonant coupling as a potential means for wireless power transfer to multiple small receivers, Power Electron, IEEE Trans, 24, 1819, 10.1109/TPEL.2009.2017195 Jiang S. Optimum wireless power transmission for sensors embedded in concrete. Florida International University, 2011. Tucker, 2013, A contribution to the wireless transmission of power, Int J Electr Power Energy Syst, 47, 235, 10.1016/j.ijepes.2012.10.066 Budhia M, Covic G, Boys J. A new IPT magnetic coupler for electric vehicle charging systems. IECON 2010–36th Annual Conference on IEEE Industrial Electronics Society. IEEE, 2010. p. 2487–92. Villa, 2009, Design of a high frequency inductively coupled power transfer system for electric vehicle battery charge, Appl Energy, 86, 355, 10.1016/j.apenergy.2008.05.009 Budhia, 2011, Design and optimization of circular magnetic structures for lumped inductive power transfer systems, Power Electron, IEEE Trans, 26, 3096, 10.1109/TPEL.2011.2143730 Budhia M, Covic GA, Boys JT, et al. Development and evaluation of single sided flux couplers for contactless electric vehicle charging. Energy Conversion Congress and Exposition (ECCE), 2011 IEEE. IEEE, 2011. p. 614–21. Budhia, 2013, Development of a single-sided flux magnetic coupler for electric vehicle IPT charging systems, Ind Electron, IEEE Trans, 60, 318, 10.1109/TIE.2011.2179274 Covic, 2011, A bipolar primary pad topology for EV stationary charging and highway power by inductive coupling, Energy Conversion Congress Exposition (ECCE) 2011 IEEE. IEEE, 1832, 10.1109/ECCE.2011.6064008 Bolger JG, Kirsten FA, Ng LS. Inductive power coupling for an electric highway system. Vehicular Technology Conference, 1978. 28th IEEE. IEEE, vol. 28, 1978. p. 137–44. Shin, 2013, Design of buried power line for roadway-powered electric vehicle system, Wireless Power Transfer (WPT), 2013 IEEE. IEEE, 56, 10.1109/WPT.2013.6556880 Zhang W, Wong SC, Tse CK, et al. A study of sectional tracks in roadway inductive power transfer system. Energy Conversion Congress and Exposition (ECCE), 2011 IEEE. IEEE, 2011. p. 822–26. Yilmaz M, Buyukdegirmenci VT, Krein PT. General design requirements and analysis of roadbed inductive power transfer system for dynamic electric vehicle charging. Transportation Electrification Conference and Expo (ITEC), 2012 IEEE. IEEE, 2012. p. 1–6. Covic, 2013, Inductive charging transfer, Proc IEEE, 101, 1276, 10.1109/JPROC.2013.2244536 Rim C T. The development and deployment of On-Line Electric Vehicles (OLEV). <http://www.ecce2013.org/documents/2013%20ECCE%20Special%20sessions/SS3/SS3.2_WP_Chun.Rim.pdf> [accessed 10.04.14]. Van Vliet MRA, Van Gurp CAPM, De Bondt AH, Van Bijsterveld WT. Structural viability of shallow depth hollow systems in airfield pavements. 1st European Airport Pavement Workshop, Amsterdam, 2005. Van Bijsterveld WT, De Bondt AH. Structural aspects of asphalt pavement heating and cooling systems. In: Proc, 3rd Int Symp on 3D Finite Element Modelling, Design and Research, 2002. Huang YH. Pavement analysis and design, 1993. Watson JP. Highway construction and maintenance. 1989. American Association of State Highway, Transportation Officials. AASHTO Guide for Design of Pavement Structures, 1993. AASHTO, 1993. De Bondt, 1999 Baek J. Modeling reflective cracking development in hot-mix asphalt overlays and quantification of control techniques. University of Illinois at Urbana-Champaign, 2010. Partl MN, Hean S, Poulikakos L. Asphaltic plug joint characterization and performance evaluation. In: 9th International Conference on Asphalt Pavements, 2002. Chang, 2002, Evaluation of performance of bridge deck expansion joints, J Perform Constr Facil, 16, 3, 10.1061/(ASCE)0887-3828(2002)16:1(3) Park, 2010, Improved geometric design of bridge asphalt plug joints, J Bridge Eng, 16, 158, 10.1061/(ASCE)BE.1943-5592.0000121 Lytton, 1989, Use of geotextiles for reinforcement and strain relief in asphalt concrete, Geotext Geomembr, 8, 217, 10.1016/0266-1144(89)90004-6 Mukhtar MT, Dempsey BJ. Interlayer stress absorbing composite (ISAC) for mitigating reflection cracking in asphalt concrete overlays, 1996. Newcomb, 2001, Concepts of perpetual pavements, Transport Res Circ, 503, 4 Von Quintus, 2001, Hot-mix asphalt layer thickness designs for longer-life bituminous pavements, Transport Res Circ, 503, 66 Ferne, 2006, Long-life pavements—a European study by ELLPAG, Int J Pavement Eng, 7, 91, 10.1080/10298430600619059 Newcomb DE, Willis R, Timm DH. Perpetual asphalt pavements: a synthesis, 2010. Hajj EY, Sebaaly PE, Loria L. Reflective cracking of flexible pavements – Phase I and II recommendations. University of Nevada, 2008. Maurer, 1989, Field performance of fabrics and fibers to retard reflective cracking, Geotext Geomembr, 8, 239, 10.1016/0266-1144(89)90005-8 Kim, 1999, Mode I reflection cracking resistance of strengthened asphalt concretes, Constr Build Mater, 13, 243, 10.1016/S0950-0618(99)00032-X Titi, 2003, Long-term performance of stone interlayer pavement, J Transport Eng, 129, 118, 10.1061/(ASCE)0733-947X(2003)129:2(118) Bhosale, 2007, Experimental study for evaluating crack retardation of asphalt concrete overlays, J Test Eval, 35, 589 Xiao, 2013 Mo, 2013, Review on asphalt plug joints: performance, materials, testing and installation, Constr Build Mater, 45, 106, 10.1016/j.conbuildmat.2013.03.089 Reid, 1998, Effects of joint geometry on response of asphaltic plug joints, J Transport Eng, 124, 311, 10.1061/(ASCE)0733-947X(1998)124:4(311) Florida Department of Transportation Pavement Management Office. Flexible pavement design manual, 2008. Elseifi M, Bandaru R. Cost Effective Prevention of Reflective Cracking in Composite Pavements. Louisiana Transportation Research Center, 2011. Chowdhury A, Button JW, Lytton RL. Tests of HMA overlays using geosynthetics to reduce reflection cracking. Texas Transportation Institute, Texas A&M University System, 2009. Vismara S, Molenaar AAA, Crispino M, et al. Characterizing the effects of geosynthetics in asphalt pavements. 7th RILEM International Conference on Cracking in Pavements. Springer, Netherlands, 2012. p. 1199–1207. Khodaii, 2009, Effects of geosynthetics on reduction of reflection cracking in asphalt overlays, Geotext Geomembr, 27, 1, 10.1016/j.geotexmem.2008.05.007 Kim, 2002, Analysis of reflective crack control system involving reinforcing grid over base-isolating interlayer mixture, J Transport Eng, 128, 375, 10.1061/(ASCE)0733-947X(2002)128:4(375) Elseifi, 2005, Effectiveness of steel reinforcing nettings in combating fatigue cracking in new flexible pavement systems, J Transport Eng, 131, 37, 10.1061/(ASCE)0733-947X(2005)131:1(37) De Bondt AH. 20 Years of Research on Asphalt Reinforcement-Achievements and Future Needs. In: 7th RILEM International Conference on Cracking in Pavements. Netherlands: Springer; 2012. p. 327–35. International Organization for Standardization. Environmental Management: Life Cycle Assessment: Principles and Framework. ISO, 1997. 2010 Zhou, 2013, Development of electric vehicles use in China: a study from the perspective of life-cycle energy consumption and greenhouse gas emissions, Energy Policy, 59, 875, 10.1016/j.enpol.2013.04.057 Jorgensen, 2008, Technologies for electric, hybrid and hydrogen vehicles: Electricity from renewable energy sources in transport, Utilities Policy, 16, 72, 10.1016/j.jup.2007.11.005 Poullikkas, 2015, Sustainable options for electric vehicle technologies, Renew Sustain Energy Rev, 41, 1277, 10.1016/j.rser.2014.09.016 Van Vliet, 2011, Energy use, cost and CO2 emissions of electric cars, J Power Sources, 196, 2298, 10.1016/j.jpowsour.2010.09.119 Stamati TE, Bauer P. Green energy for on-road charging of electric vehicles. MECHATRONIKA, 2012 15th International Symposium. IEEE, 2012. p. 1–9. Ma, 2012, A new comparison between the life cycle greenhouse gas emissions of battery electric vehicles and internal combustion vehicles, Energy Policy, 44, 160, 10.1016/j.enpol.2012.01.034 Hawkins, 2013, Comparative environmental life cycle assessment of conventional and electric vehicles, J Ind Ecol, 17, 53, 10.1111/j.1530-9290.2012.00532.x Hawkins, 2012, Environmental impacts of hybrid and electric vehicles—a review, Int J Life Cycle Assess, 17, 997, 10.1007/s11367-012-0440-9 Nansai, 2001, Life-cycle analysis of charging infrastructure for electric vehicles, Appl Energy, 70, 251, 10.1016/S0306-2619(01)00032-0 Lucas, 2012, Impact of energy supply infrastructure in life cycle analysis of hydrogen and electric systems applied to the Portuguese transportation sector, Int J Hydrogen Energy, 37, 10973, 10.1016/j.ijhydene.2012.04.127 Lucas, 2012, Life cycle analysis of energy supply infrastructure for conventional and electric vehicles, Energy Policy, 41, 537, 10.1016/j.enpol.2011.11.015 Meinrenken, 2015, Fleet view of electrified transportation reveals smaller potential to reduce GHG emissions, Appl Energy, 138, 393, 10.1016/j.apenergy.2014.10.082 Butt AA. Life Cycle Assessment of Asphalt Pavements including the Feedstock Energy and Asphalt Additives. KTH Royal Institute of Technology, 2012. Miliutenko S. Life cycle impacts of road infrastructure: Assessment of energy use and greenhouse gas emissions. Royal Institute of Technology, 2012.