Parametric study on Tesla valve with reverse flow for hydrogen decompression

Hwang, 2013, Sustainability study of hydrogen pathways for fuel cell vehicle applications, Renew Sustain Energy Rev, 19, 220, 10.1016/j.rser.2012.11.033 Larsson, 2015, Energy system analysis of the implications of hydrogen fuel cell vehicles in the Swedish road transport system, Int J Hydrogen Energy, 40, 11722, 10.1016/j.ijhydene.2015.04.160 Ahmadi, 2015, Comparative life cycle assessment of hydrogen fuel cell passenger vehicles in different Canadian provinces, Int J Hydrogen Energy, 40, 12905, 10.1016/j.ijhydene.2015.07.147 Fernández, 2016, A new approach to battery powered electric vehicles: a hydrogen fuel-cell-based range extender system, Int J Hydrogen Energy, 41, 4808, 10.1016/j.ijhydene.2016.01.035 Xu, 2015, Multi-objective component sizing based on optimal energy management strategy of fuel cell electric vehicles, Appl Energy, 157, 664, 10.1016/j.apenergy.2015.02.017 Sulaiman, 2015, A review on energy management system for fuel cell hybrid electric vehicle: issues and challenges, Renew Sustain Energy Rev, 52, 802, 10.1016/j.rser.2015.07.132 Yamabe, 2011, Application of acoustic emission method to detection of internal fracture of sealing rubber material by high-pressure hydrogen decompression, Polym Test, 30, 76, 10.1016/j.polymertesting.2010.11.002 Yamabe, 2011, Nanoscale fracture analysis by atomic force microscopy of EPDM rubber due to high-pressure hydrogen decompression, J Mater Sci, 46, 2300, 10.1007/s10853-010-5073-4 Gerland, 2016, Early stages of cavitation in a stretched and decompressed poly (vinylidene fluoride) exposed to diffusive hydrogen, observed by transmission electronic microscopy at the nanoscale, Int J Hydrogen Energy, 41, 1766, 10.1016/j.ijhydene.2015.11.015 Koga, 2011, Evaluation on high-pressure hydrogen decompression failure of rubber O-ring using design of experiments, Int J Automot Eng, 2, 123, 10.20485/jsaeijae.2.4_123 Castagnet, 2017, Swelling measurement during sorption and decompression in a NBR exposed to high-pressure hydrogen, Int J Hydrogen Energy, 42, 19359, 10.1016/j.ijhydene.2017.06.138 Chen, 2017, Pressure analysis on two-step high pressure reducing system for hydrogen fuel cell electric vehicle, Int J Hydrogen Energy, 42, 11541, 10.1016/j.ijhydene.2017.02.077 Jin, 2016, Numerical analysis of flow and temperature characteristics in a high multi-stage pressure reducing valve for hydrogen refueling station, Int J Hydrogen Energy, 41, 5559, 10.1016/j.ijhydene.2016.02.013 Qian, 2016, Effects of orifice on pressure difference in pilot-control globe valve by experimental and numerical methods, Int J Hydrogen Energy, 41, 18562, 10.1016/j.ijhydene.2016.08.070 Qian, 2017, Experimental and numerical analysis of spring stiffness on flow and valve core movement in pilot control globe valve, Int J Hydrogen Energy, 42, 17192, 10.1016/j.ijhydene.2017.05.190 Amirante, 2016, Sliding spool design for reducing the actuation forces in direct operated proportional directional valves: experimental validation, Energy Convers Manag, 119, 399, 10.1016/j.enconman.2016.04.068 Amirante, 2014, Fluid-dynamic design optimization of hydraulic proportional directional valves, Eng Optim, 46, 1295, 10.1080/0305215X.2013.836638 Lisowski, 2016, CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Convers Manag, 123, 15, 10.1016/j.enconman.2016.06.025 Lisowski, 2015, Pressure compensation using flow forces in a multi-section proportional directional control valve, Energy Convers Manag, 103, 1052, 10.1016/j.enconman.2015.07.038 Saha, 2014, Dynamic simulation of a pressure regulating and shut-off valve, Comput Fluids, 101, 233, 10.1016/j.compfluid.2014.06.011 Chattopadhyay, 2012, Analysis of flow structure inside a spool type pressure regulating valve, Energy Convers Manag, 53, 196, 10.1016/j.enconman.2011.08.021 Thompson, 2011, Investigation of a flat-plate oscillating heat pipe with Tesla-type check valves, Exp Therm Fluid Sci, 35, 1265, 10.1016/j.expthermflusci.2011.04.014 de Vries, 2017, Design and operation of a Tesla-type valve for pulsating heat pipes, Int J Heat Mass Tran, 105, 1, 10.1016/j.ijheatmasstransfer.2016.09.062 Thompson, 2014, Numerical investigation of multistaged tesla valves, J Fluid Eng, 136, 081102, 10.1115/1.4026620 Wang, 2014, Tesla valves in micromixers, Int J Chem React Eng, 12, 397, 10.1515/ijcre-2013-0106 Zhang, 2007, Performance simulations of Tesla microfluidic valves, 15 Truong, 2003, Simulation and optimization of tesla valves, Nanotechnology, 1, 178 Song, 2014, A CFD analysis of the dynamics of a direct-operated safety relief valve mounted on a pressure vessel, Energy Convers Manag, 81, 407, 10.1016/j.enconman.2014.02.021 Sambandam, 2017, Investigation of energy saving potentials in T-junction and elbow in compressed air systems, Energy Effic, 1