Application of response surface methodology for optimization of Remazol Brilliant Blue R removal onto a novel polymeric adsorbent

Peter, 1975, III, 115 Giménez-Martín, 2007, Electrokinetic effect and surface free energy behavior in the adsorption process of a reactive dye onto Leacril pretreated with polyethyleneimine ion, J Colloid Interface Sci, 311, 394, 10.1016/j.jcis.2007.03.020 Ahmad, 2011, Optimization of rambutan peel based activated carbon preparation conditions for Remazol Brilliant Blue R removal, Chem Eng J, 168, 280, 10.1016/j.cej.2011.01.005 Santhy, 2006, Removal of reactive dyes from wastewater by adsorption on coir pith activated carbon, Bioresour Technol, 97, 1329, 10.1016/j.biortech.2005.05.016 Ada, 2009, Adsorption of Remazol Brilliant Blue R using ZnO fine powder: equilibrium, kinetic and thermodynamic modeling studies, J Hazard Mater, 165, 637, 10.1016/j.jhazmat.2008.10.036 Bromley-Challenor, 2000, Decolorization of an azo dye by unacclimated activated sludge under an aerobic conditions, Water Res, 34, 4410, 10.1016/S0043-1354(00)00212-8 Avlonitis, 2008, Simulated cotton dye effluents treatment and reuse by nanofiltration, Desalination, 221, 259, 10.1016/j.desal.2007.01.082 Peternel, 2007, Comparative study of UV/TiO2, UV/ZnO and photo-Fenton processes for the organic reactive dye degradation in aqueous solution, J Hazard Mater, 148, 477, 10.1016/j.jhazmat.2007.02.072 Crini, 2008, Application of chitosan, a natural aminopolysaccharide, for dye removal from aqueous solutions by adsorption processes using batch studies: a review of recent literature, Prog Polym Sci, 33, 399, 10.1016/j.progpolymsci.2007.11.001 Silva, 2016, Almeida VC Mesoporous activated carbon from industrial laundry sewage sludge: adsorption studies of reactive dye Remazol Brilliant Blue R., Chem Eng J, 303, 467, 10.1016/j.cej.2016.06.009 Diejing, 2017, Novel fabrication of PAA/PVA/yeast superabsorbent with interpenetrating polymer network for pH-dependent selective adsorption of dyes, J Polym Environ Okutucu, 2016, Decolorization of textile wastewater by dye-imprinted polymer, Desalin Water Treat, 57, 21577, 10.1080/19443994.2015.1123652 Wang, 2016, Anionic and cationic dyes adsorption on porous poly-melamine-formaldehyde polymer, Chem Eng Res Des, 114, 258, 10.1016/j.cherd.2016.08.027 Zhong, 2012, Preparation of peanut hull-based activated carbon by microwave-induced phosphoric acid activation and its application in Remazol Brilliant Blue R adsorption, Ind Crop Prod, 37, 178, 10.1016/j.indcrop.2011.12.015 Karacan, 2007, Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology, Appl Therm Eng, 27, 1212, 10.1016/j.applthermaleng.2006.02.046 Tehrani, 2016, Competitive removal of hazardous dyes from aqueous solution by MIL-68(Al): derivative spectrophotometric method and response surface methodology approach, Spectrochim Acta A, 160, 8, 10.1016/j.saa.2016.02.002 Ghaedi, 2016, Response surface methodology approach for optimization of adsorption of Janus Green B from aqueous solution onto ZnO/Zn(OH)2-NP-AC: kinetic and isotherm study, Spectrochim Acta A, 152, 233, 10.1016/j.saa.2015.06.128 Asfaram, 2015, Simultaneous ultrasound-assisted ternary adsorption of dyes onto copper-doped zinc sulfide nanoparticles loaded on activated carbon: optimization by response surface methodology, Spectrochim Acta A, 145, 203, 10.1016/j.saa.2015.03.006 Biryan, 2016, Synthesis, thermal degradation and dielectric properties of poly[2-hydroxy,3-(1-naphthyloxy)propyl methacrylate], Polym Bull Ghaedi, 2015, Comparative studies on removal of erythrosine using ZnS and AgOH nanoparticles loaded on activated carbon as adsorbents: kinetic and isotherm studies of adsorption, Spectrochim Acta A, 138, 176, 10.1016/j.saa.2014.10.046 Montgomery, 2005 Zheng, 2015, Adsorption of malachite green by magnetic litchi pericarps: a response surface methodology investigation, J Environ Manage, 162, 232, 10.1016/j.jenvman.2015.07.057 Agarwal, 2016, Ultrasound-assisted adsorption of Sunset Yellow CFC dye onto Cu doped ZnS nanoparticles loaded on activated carbon using response surface methodology based on central composite design, J Mol Liq, 219, 332, 10.1016/j.molliq.2016.02.100 Dastkhoon, 2015, Ultrasound assisted adsorption of malachite green dye onto ZnS:Cu-NPAC: equilibrium isotherms and kinetic studies-response surface optimization, Sep Purif Technol, 156, 780, 10.1016/j.seppur.2015.11.001 Zhu, 2014, Optimization of copper(II) adsorption onto novel magnetic calcium alginate/maghemite hydrogel beads using response surface methodology, Ind Eng Chem Res, 53, 4059, 10.1021/ie4031677 Asfaram, 2016, Biosorption of malachite green by novel biosorbent Yarrowia lipolytica isf7: application of response surface methodology, J Mol Liq, 214, 249, 10.1016/j.molliq.2015.12.075 Pavlovic, 2014, Rapid cationic dye adsorption on polyphenol-extracted coffee grounds-a response surface methodology approach, J Taiwan Inst Chem Eng, 45, 1691, 10.1016/j.jtice.2013.12.018 Ghorbani, 2008, Application of response surface methodology for optimization of cadmium biosorption in an aqueous solution by Saccharomyces cerevisiae, Chem Eng J, 145, 267, 10.1016/j.cej.2008.04.028 Mona, 2011, Waste biomass of Nostoc linckia as adsorbent of crystal violet dye: optimization based on statistical model, Int Biodeterior Biodegrad, 65, 513, 10.1016/j.ibiod.2011.02.002 Ching, 2011, Influence of impregnation ratio on coffee ground activated carbon as landfill leachate adsorbent for removal of total iron and orthophosphate, Desalination, 279, 225, 10.1016/j.desal.2011.06.011 Sathishkumar, 2012, Utilization of agro-industrial waste Jatropha curcas pods as an activated carbon for the adsorption of reactive dye Remazol Brilliant Blue R (RBBR), J Clean Prod, 22, 67, 10.1016/j.jclepro.2011.09.017 Janaki, 2012, Polyaniline/chitosan composite: an eco-friendly polymer for enhanced removal of dyes from aqueous solution, Synth Met, 162, 974, 10.1016/j.synthmet.2012.04.015 Yan, 2015, Fabrication of polyaniline hydrogel: synthesis, characterization and adsorption of methylene blue, Appl Surf Sci, 356, 39, 10.1016/j.apsusc.2015.08.024 Dizge, 2008, Adsorption of reactive dyes from aqueous solutions by fly ash: kinetic and equilibrium studies, J Hazard Mater, 150, 737, 10.1016/j.jhazmat.2007.05.027 Ergene, 2009, Removal of Remazol Brilliant Blue R dye from aqueous solutions by adsorption onto immobilized Scenedesmus quadricauda: equilibrium and kinetic modeling studies, Desalination, 249, 1308, 10.1016/j.desal.2009.06.027 Kara, 2007, Modeling the effects of adsorbent dose and particle size on the adsorption of reactive textile dyes by fly ash, Desalination, 212, 282, 10.1016/j.desal.2006.09.022 Kyzas, 2013, Optimization of chitosan and cyclodextrin molecularly imprinted polymer synthesis for dye adsorption, Carbohydr Polym, 91, 198, 10.1016/j.carbpol.2012.08.016 Mohamadi, 2014, Optimization of dye removal from aqueous Remazol Brilliant Blue R (RBBR) by Trametessp. pellets, J Appl Res Water Wastewater, 1, 2 Rahmat, 2016, Removal of Remazol Brilliant Blue R from aqueous solution by adsorption using pineapple leaf powder and lime peel powder, Water Air Soil Pollut, 227, 105, 10.1007/s11270-016-2807-1 Agarwal, 2016, Kinetics, equilibrium studies and thermodynamics of methylene blue adsorption on Ephedra strobilacea saw dust and modified using phosphoric acid and zinc chloride, J Mol Liq, 218, 208, 10.1016/j.molliq.2016.02.073 Crini, 2008, Kinetic and equilibrium studies on the removal of cationic dyes from aqueous solution by adsorption onto a cyclodextrin polymer, Dyes Pigm, 77, 415, 10.1016/j.dyepig.2007.07.001 Ghaedia, 2012, Kinetics, thermodynamics and equilibrium evaluation of direct yellow 12 removal by adsorption onto silver nanoparticles loaded activated carbon, Chem Eng J, 187, 133, 10.1016/j.cej.2012.01.111 Gholivand, 2015, Adsorptive removal of alizarin red-S and alizarin yellow GG from aqueous solutions using polypyrrole-coated magnetic nanoparticles, J Environ Chem Eng, 3, 529, 10.1016/j.jece.2015.01.011