Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures

Mafipour, M.S., et al., Closed-Form Formulations in Composite Beams Based on Partially-Composite Behavior, in 3rd International Conference on Applied Research in Structural Engineering and Constructional Management. 25-26 June 2019: Tehran, Iran. Mafipour, M.S., et al., Fatigue Behavior of Headed Stud Shear Connectors in Steel-Concrete Composite Bridge Girders, in 3rd International Conference on Applied Research in Structural Engineering and Constructional Management. 25-26 June 2019: Tehran, Iran. Nasrollahi, 2018, Investigation of pipe shear connectors using push out test. Steel Compos, Struct. Int. J, 27, 537 Wang, 2017, Push-out tests of demountable headed stud shear connectors in steel-UHPC composite structures, Compos Struct, 170, 69, 10.1016/j.compstruct.2017.03.004 Ghiami Azad, A.R., M.S. Mafipour, and S. Tatlari, Fatigue Behavior of Shear Connectors in Steel-Concrete Beams with Partial Interaction, in 3rd International Conference on Steel & Structure. 11-12 December 2018: Tehran, Iran. Ghiami Azad, A.R., M.S. Mafipour, and S. Tatlari, A Novel Method for Linear Analysis of Partially-Composite Beams, in 3rd International Conference on Steel & Structure. 11-12 December 2018: Tehran, Iran. Sohel, 2012, Behavior of Steel–Concrete–Steel sandwich structures with lightweight cement composite and novel shear connectors, Compos Struct, 94, 3500, 10.1016/j.compstruct.2012.05.023 Hopkins, 2017, Creep behavior of insulated concrete sandwich panels with fiber-reinforced polymer shear connectors, Compos Struct, 172, 137, 10.1016/j.compstruct.2017.03.038 Wang, 2018, Static behavior of grouped large headed stud-UHPC shear connectors in composite structures, Compos Struct, 206, 202, 10.1016/j.compstruct.2018.08.038 Zou, 2016, Perforated FRP ribs for shear connecting of FRP-concrete hybrid beams/decks, Compos Struct, 152, 267, 10.1016/j.compstruct.2016.05.039 Shariati, M., et al. Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading. in Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017. 2017. Zurich, Switzerland. Shariati, A., Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete. 2014, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya. Shariati, 2012, Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study, Mater Des, 41, 67, 10.1016/j.matdes.2012.04.039 Rao, 1970, Composite construction-tests on small-scale shear connectors, Journal of the Institution of Engineers, Australia, 4 Hiroshi Yokota and O. Kiyomia, Load carrying capacity of shear connectors made of shape steel in steel-concrete composite members. Structures division subaqueous tunnels and pipelines laboratory, 1987. PARI Techinical Note 0595. Ciutina, A.L. and A. Stratan. Cyclic Performances of Shear Connectors. 2008. ASCE. Choi, 2008, Fatigue Strength of Angle Shape Shear Connector Used in Steel-Concrete Composite Slab, International Journal of Steel Structures, 8, 199 Choi, 2011 Fukazawa, 2002, Fatigue durability of steel-concrete composite slab, MELAB and application to continuous composite steel girder bridge, Mitsui Zosen Technical Review, 6, 8 Khalilian, M., The assessment of shear capacity of angle shear connectors. 2013, Sharif University of Technology. Shariati, 2014, Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete, Eng Fail Anal, 41, 124, 10.1016/j.engfailanal.2014.02.017 Shariati, 2011, Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete, Scientific Research and Essays, 6, 977 Shariati, 2011, Behavior of Channel Shear Connectors in Normal and Light Weight Aggregate Concrete (Experimental and Analytical Study), Advanced Materials Research, 168, 2303 Shahabi, 2016, Performance of shear connectors at elevated temperatures-A review, Steel Compos. Struct, 20, 185, 10.12989/scs.2016.20.1.185 Mashiri, 2017, Post-fire behaviour of innovative shear connection for steel-concrete composite structures Wald, 2006, Experimental behaviour of a steel structure under natural fire, Fire Saf J, 41, 509, 10.1016/j.firesaf.2006.05.006 Bezerra, 2018, Truss-type shear connector for composite steel-concrete beams, Constr Build Mater, 167, 757, 10.1016/j.conbuildmat.2018.01.183 Nasrollahi, 2018, Investigation of pipe shear connectors using push out test, Steel and Composite Structures, 27, 537 Wei, 2018, Distribution of shear force in perforated shear connectors, Steel and Composite Structures, 27, 389 Ghiami Azad, 2019, Large-scale fatigue testing of post-installed shear connectors in partially-composite bridge girders, J Constr Steel Res, 161, 57, 10.1016/j.jcsr.2019.06.007 Azad, A.R.G. and M.S. Mafipour, A New Approach for Analysis of Shear Connectors with Arbitrary Distribution in Partially-Composite Steel Girder Bridges with Concrete Deck, in 5th International Conference on Bridges. 17-18 Dec. 2019: Tehran, Iran. Armaghani, 2019, Development of a novel hybrid intelligent model for solving engineering problems using GS-GMDH algorithm, Engineering with Computers, 1 Ghaleini, 2019, A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls, Engineering with Computers, 35, 647, 10.1007/s00366-018-0625-3 Gordan, 2019, Estimating and optimizing safety factors of retaining wall through neural network and bee colony techniques, Engineering with Computers, 35, 945, 10.1007/s00366-018-0642-2 Guo, 2019, Deep neural network and whale optimization algorithm to assess flyrock induced by blasting, Engineering with Computers, 1 Koopialipoor, 2019, Development of a new hybrid ANN for solving a geotechnical problem related to tunnel boring machine performance, Engineering with Computers, 1 Zhao, 2019, A new methodology for optimization and prediction of rate of penetration during drilling operations, Engineering with Computers, 1 Shariati, 2020, Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS), Steel and Composite Structures, 34, 155 Shariati, 2020, Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm), Smart Structures and Systems, 25, 183 Shariati, 2020, A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques, Engineering with Computers, 1 Yu, 2019, An analytical solution of distortional buckling resistance of cold-formed steel channel-section beams with web openings, Thin-Walled Structures, 135, 446, 10.1016/j.tws.2018.11.012 Gholami, 2019, A comparison of artificial intelligence-based classification techniques in predicting flow variables in sharp curved channels, Engineering with Computers, 1 Paknahad, 2018, Shear capacity equation for channel shear connectors in steel-concrete composite beams, Steel and Composite structures, 28, 483 Harandizadeh, 2019, Application of improved ANFIS approaches to estimate bearing capacity of piles, J Soft Computing, 23, 9537, 10.1007/s00500-018-3517-y Harandizadeh, 2020, Development of fuzzy-GMDH model optimized by GSA to predict rock tensile strength based on experimental datasets, J Neural Computing Applications, 32, 14047, 10.1007/s00521-020-04803-z Najafzadeh, 2013, GMDH to predict scour depth around a pier in cohesive soils, J Applied ocean research, 40, 35, 10.1016/j.apor.2012.12.004 Najafzadeh, 2015, Neuro-fuzzy GMDH systems based evolutionary algorithms to predict scour pile groups in clear water conditions, J Ocean Engineering, 99, 85, 10.1016/j.oceaneng.2015.01.014 Harandizadeh, 2019, A new development of ANFIS–GMDH optimized by PSO to predict pile bearing capacity based on experimental datasets, J Engineering with Computers, 1 Najafzadeh, 2013, Group method of data handling to predict scour depth around vertical piles under regular waves, J Scientia Iranica, 20, 406 Shariati, 2019, Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures, Steel and Composite Structures, 33, 319 Shariati, 2019, Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete, Applied Sciences, 9, 5534, 10.3390/app9245534 Khademi, 2017, Multiple linear regression, artificial neural network, and fuzzy logic prediction of 28 days compressive strength of concrete, Frontiers of Structural and Civil Engineering, 11, 90, 10.1007/s11709-016-0363-9 Naderpour, H. and M. Mirrashid, Application of Soft Computing to Reinforced Concrete Beams Strengthened with Fibre Reinforced Polymers: A State-of-the-Art Review. Computational techniques for civil and structural engineering: p. 305-323. Ma, 2019, Artificial neural network models for FRP-repaired concrete subjected to pre-damaged effects, Neural Comput Appl, 31, 711, 10.1007/s00521-017-3104-7 Yaseen, 2018, Predicting compressive strength of lightweight foamed concrete using extreme learning machine model, Adv Eng Softw, 115, 112, 10.1016/j.advengsoft.2017.09.004 Chen, 2019, Assessing dynamic conditions of the retaining wall: developing two hybrid intelligent models, Applied Sciences, 9, 1042, 10.3390/app9061042 Ashrafian, 2020, Compressive strength of Foamed Cellular Lightweight Concrete simulation: New development of hybrid artificial intelligence model, Constr Build Mater, 230, 10.1016/j.conbuildmat.2019.117048 Golafshani, 2020, Predicting the compressive strength of normal and High-Performance Concretes using ANN and ANFIS hybridized with Grey Wolf Optimizer, Constr Build Mater, 232, 10.1016/j.conbuildmat.2019.117266 Koopialipoor, 2019, Applying various hybrid intelligent systems to evaluate and predict slope stability under static and dynamic conditions, Soft Comput, 23, 5913, 10.1007/s00500-018-3253-3 Davoodnabi, 2019, Behavior of steel-concrete composite beam using angle shear connectors at fire condition, Steel and Composite Structures, 30, 141 Toghroli, 2018, Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method, Computers and Concrete, 21, 525 Hasanipanah, 2016, Feasibility of PSO–ANFIS model to estimate rock fragmentation produced by mine blasting, Neural Comput Appl, 1 Petković, 2014, Adapting project management method and ANFIS strategy for variables selection and analyzing wind turbine wake effect, Nat Hazards, 74, 463, 10.1007/s11069-014-1189-1 Sedghi, 2018, Application of ANFIS technique on performance of C and L shaped angle shear connectors, Smart Struct Syst, 22, 335 Hamdia, 2015, Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS, Comput Mater Sci, 102, 304, 10.1016/j.commatsci.2015.02.045 Ali, 2015 Toghroli, 2014, Prediction of shear capacity of channel shear connectors using the ANFIS model, Steel Compos Struct, 17, 623, 10.12989/scs.2014.17.5.623 Sari, 2019, Developing a hybrid adoptive neuro-fuzzy inference system in predicting safety of factors of slopes subjected to surface eco-protection techniques, Engineering with Computers, 1 Holland, 1992, Genetic algorithms, Sci Am, 267, 66, 10.1038/scientificamerican0792-66 Goldberg, 1988, Genetic algorithms and machine learning. Kennedy, 1997 Bui, 2019, Estimating PM10 Concentration from Drilling Operations in Open-Pit Mines Using an Assembly of SVR and PSO, Applied Sciences, 9, 2806, 10.3390/app9142806 Safa, 2020, 124046 Huang, 2006, Extreme learning machine: theory and applications, Neurocomputing, 70, 489, 10.1016/j.neucom.2005.12.126 Moody, 1989, Fast learning in networks of locally-tuned processing units, Neural Comput, 1, 281, 10.1162/neco.1989.1.2.281 Schwenker, F., et al. Similarities of LVQ and RBF learning-a survey of learning rules and the application to the classification of signals from high-resolution electrocardiography. in Proceedings of IEEE International Conference on Systems, Man and Cybernetics. 1994. IEEE. Kohonen, 1988, An introduction to neural computing, Neural networks, 1, 3, 10.1016/0893-6080(88)90020-2 Haykin, 1999, Neural Networks, a comprehensive foundation, Prentice-Hall Inc., Upper Saddle River, New Jersey, 7458, 161 Bishop, C.M., Neural networks for pattern recognition. 1995: Oxford university press. Willmott, 1981, On the validation of models, Phys Geogr, 2, 184, 10.1080/02723646.1981.10642213 Nash, 1970, River flow forecasting through conceptual models part I—A discussion of principles, J Hydrol, 10, 282, 10.1016/0022-1694(70)90255-6 Ferreira, 2003, A formulation of the multiquadric radial basis function method for the analysis of laminated composite plates, Composite structures, 59, 385, 10.1016/S0263-8223(02)00239-8 Phung-Van, 2020, Isogeometric nonlinear transient analysis of porous FGM plates subjected to hygro-thermo-mechanical loads, Thin-Walled Structures, 148, 106497, 10.1016/j.tws.2019.106497 Xu, 2014, Real‐time hybrid simulation approach for performance validation of structural active control systems: a linear motor actuator based active mass driver case study, Structural Control and Health Monitoring, 21, 574, 10.1002/stc.1585 Abedini, 2020, Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column, Structures, 28, 456, 10.1016/j.istruc.2020.08.084 Wang, 2021, An Adaptive Neural Sliding Mode Control with ESO for Uncertain Nonlinear Systems, International journal of control, automation and systems, 19, 687, 10.1007/s12555-019-0972-x Bai, 2021, Bi-directional seismic behavior of steel beam-column connections with outer annular stiffener, Engineering Structures, 227, 111443, 10.1016/j.engstruct.2020.111443 Zhang, 2020, Set-based obfuscation for strong PUFs against machine learning attacks, IEEE transactions on circuits and systems I: regular papers, 68, 288, 10.1109/TCSI.2020.3028508 Zhang, 2018, Adaptive estimated inverse output-feedback quantized control for piezoelectric positioning stage, IEEE transactions on cybernetics, 49, 2106, 10.1109/TCYB.2018.2826519 Xue, 2020, Affine transformation-enhanced multifactorial optimization for heterogeneous problems, IEEE Transactions on Cybernetics, 1 Provenzano, 2004, Interpretation of a model footing response through an adaptive neural fuzzy inference system, Computers and Geotechnics, 31, 251, 10.1016/j.compgeo.2004.03.001 Runqian, 2021, Assessment of composite beam performance using GWO–ELM metaheuristic algorithm, Engineering with Computers, 1 Shariati, 2020, A novel hybrid extreme learning machine–grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement, Engineering with Computers, 1 Djeddou, 2020, Predictive Modelling of COVID-19 New Cases in Algeria using An Extreme Learning Machines (ELM), medRxiv Choi, 2003, Nonlinear regression using RBFN with linear submodels, Chemometrics and Intelligent Laboratory Systems, 65, 191, 10.1016/S0169-7439(02)00109-0 Walczak, 2000, Erratum to’’Local modelling with radial basis function networks, Chemometrics and Intelligent Laboratory Systems, 2, 219, 10.1016/S0169-7439(00)00087-3 Deng, 2020, Machine-learning-assisted prediction of the mechanical properties of Cu-Al alloy, International Journal of Minerals, Metallurgy and Materials, 27, 362, 10.1007/s12613-019-1894-6 Wu, 2021, Prediction of the Charpy V-notch impact energy of low carbon steel using a shallow neural network and deep learning, International Journal of Minerals, Metallurgy and Materials, 28, 1, 10.1007/s12613-020-2168-z He, 2021, Intelligent logistics system of steel bar warehouse based on ubiquitous information, International Journal of Minerals, Metallurgy and Materials, 28, 1367, 10.1007/s12613-021-2325-z Vujic, 2011, Fuzzy linear model for production optimization of mining systems with multiple entities, International Journal of Minerals, Metallurgy, and Materials, 18, 633, 10.1007/s12613-011-0488-8 Zhang, 2006, Parameter optimization and analysis of a vehicle suspension system controlled by magnetorheological fluid dampers, Structural Control and Health Monitoring: The Official Journal of the International Association for Structural Control and Monitoring and of the European Association for the Control of Structures, 13, 885, 10.1002/stc.63 Jiang, 2017, Optimizing multistage discriminative dictionaries for blind image quality assessment, IEEE Transactions on Multimedia, 20, 2035, 10.1109/TMM.2017.2763321 Zhang, 2021, An integrated control algorithm of power distribution for islanded microgrid based on improved virtual synchronous generator, IET Renewable Power Generation, 10.1049/rpg2.12191 Tang, 2010, Radial Basis Function Neural Network Models for Peak Stress and Strain in Plain Concrete under Triaxial stress, Materials in Civil Engineering, 22 ISO 834, 1999, Fire-resistance tests — Elements of building construction, International Organization for Standardization