Identifying the weak spots in packaging paper: local variations in grammage, fiber orientation and density and the resulting local strain and failure under load
Tóm tắt
Measured local paper structure—i.e. local basis weight, local thickness, local density and local fiber orientation—has been linked to local strain and local material failure (local temperature increase due to energy dissipation upon fiber–fiber bond failure) measured during tensile testing. The data has been spatially linked through data map registration delivering several thousand
$$1\times 1\,\hbox{mm}^2$$
paper regions, each containing all measured properties. The relation between local paper structure and resulting local deformation and failure is studied with regression models. Multiple linear regression modeling was used to identify the paper structure related drivers for local concentrations of strain under load and local concentrations of material failure, which are both starting to occur considerably before rupture of the paper. Analyzing the development of local strain in paper we found that regions with higher basis weight and higher fiber orientation in load direction tend to exhibit considerably lower strain during tensile testing. Furthermore, the relation between local strain and local grammage can be predicted with the statistical theory of elasticity. Also regions with higher density have lower local strain, but not as pronounced. The findings for local fiber–fiber bond failure of paper are similar but not equivalent. The strongest correlation exists with local grammage. Local density and local fiber orientation show in turn weaker correlation with local bond failure. Local variations in paper thickness were not relevant in any case. These findings are highlighting the relevance of local fiber orientation and local density variations as structural mechanisms governing paper failure. In the past the focus has been mostly on paper formation. Together with local grammage (formation) they are responsible for the weak spots in paper, and thus cause local concentrations of paper strain and the initiation of failure under tensile load.
Tài liệu tham khảo
Alava M, Niskanen K (2008) In-plane tensile properties. In: Papermaking science and technology, vol 16, 2nd edn, Chap 5. Finnish Paper Engineers’ Association, Helsinki, pp 181–228
Battams GP, Dulieu-Barton JM (2016) Data-rich characterisation of damage propagation in composite materials. Compos Part A Appl Sci Manuf 91:420–435. https://doi.org/10.1016/j.compositesa.2016.08.007
Borodulina S, Kulachenko A, Galland S, Nygårds M (2012) Stress–strain curve of paper revisited. Nord Pulp Pap Res J 27(2):318–328. https://doi.org/10.3183/npprj-2012-27-02-p318-328
Dodson CTJ (1970) The statistical analysis of patterns of deformation in flat bonded fibrous networks. J Phys D Appl Phys 3(3):269–276. https://doi.org/10.1088/0022-3727/3/3/305
Dodson CTJ, Oba Y, Sampson WW (2001) On the distribution of mass, thickness and density in paper. Appita J 54(4):385–389
Dumbleton DP, Kringstad KP, Soremark C (1973) Temperature profiles in paper during straining. Svensk Papperstidning 76(14):521–528
Eberl C, Thompson R, Gianola D, Sharpe Jr W, Hemker K (2006) Digital image correlation and tracking. In: MatLabCentral, mathworks file exchange server. FileID 12413. Accessed 4 April 2017
Goidescu C, Welemane H, Garnier C, Fazzini M, Brault R, Péronnet E, Mistou S (2013) Damage investigation in cfrp composites using full-field measurement techniques: combination of digital image stereo-correlation, infrared thermography and x-ray tomography. Compos Part B Eng 48:95–105. https://doi.org/10.1016/j.compositesb.2012.11.016
Hagman A, Nygårds M (2012) Investigation of sample-size effects on in-plane tensile testing of paperboard. Nord Pulp Pap Res J 27(2):295–304. https://doi.org/10.3183/npprj-2012-27-02-p295-304
Hagman A, Nygårds M (2017) Thermographical analysis of paper during tensile testing and comparison to digital image correlation. Exp Mech 57(2):325–339. https://doi.org/10.1007/s11340-016-0240-4
Hirn U, Bauer W (2007) Evaluating an improved method to determine layered fiber orientation by sheet splitting. In: 61st Annual APPITA conference and 2007 paper physics conference, pp 71–80
Hirn U, Lechthaler M, Bauer W (2008) Registration and point wise correlation of local paper properties. Nord Pulp Pap Res J 23(4):374–381. https://doi.org/10.3183/npprj-2008-23-04-p374-381
Hyll C (2012) Infrared emittance of paper: method development, measurement and application. Licentiate thesis, The Royal Institute of Technology, Stockholm
I’Anson SJ, Sampson WW, Savani S (2008) Density dependent influence of grammage on tensile properties of handsheets. J Pulp Pap Sci 34(3):182
Isaksson P, Hägglund R (2013) Acoustic emission assisted fracture zone analysis of cellulose fibre materials. J Compos Mater 47(22):2865–2874. https://doi.org/10.1177/0021998312459781
Keller DS, Pawlak JJ (2001) \(\beta\)-radiographic imaging of paper formation using storage phosphor screens. J Pulp Pap Sci 27(4):117–123
Keller DS, Branca DL, Kwon O (2012) Characterization of nonwoven structures by spatial partitioning of local thickness and mass density. J Mater Sci 47(1):208–226. https://doi.org/10.1007/s10853-011-5788-x
Korteoja MJ, Lukkarinen A, Kaski K, Gunderson DE, Dahlke JL, Niskanen KJ (1996) Local strain fields in paper. Tappi J 79(4):217–224
Korteoja MJ, Lukkarinen A, Kaski K, Niskanen KJ (1997) Computational study of formation effects on paper strength. J Pulp Pap Sci 23(1):J18–J22
Korteoja MJ, Niskanen KJ, Kortschot MT, Kaski KK (1998) Progressive damage in paper. Pap Puu 80(5):364–372
Krasnoshlyk V, Rolland du Roscoat S, Dumont PJJ, Isaksson P (2018a) Influence of the local mass density variation on the fracture behavior of fiber network materials. Int J Solids Struct 138:236–244. https://doi.org/10.1016/j.ijsolstr.2018.01.016
Krasnoshlyk V, Rolland du Roscoat S, Dumont PJJ, Isaksson P, Ando E, Bonnin A (2018b) Three-dimensional visualization and quantification of the fracture mechanisms in sparse fibre networks using multiscale x-ray microtomography. Proc R Soc A 474:20180175. https://doi.org/10.1098/rspa.2018.0175
Neter J, Kutner MH, Nachtsheim CJ, Wasserman W (1996) Applied linear statistical models, 4th edn. McGraw-Hill, New York
Niskanen K, Pakarinen P (2008) Paper structure. In: Papermaking Science and Technology, vol 16, 2nd edn, Chap. 1. Finnish Paper Engineers’ Association, Helsinki, pp 11–58
Norman RJ (1965) Dependence of sheet properties on formation and forming variables. In: Bolam F (eds) Consolidation of the Paper Web, Trans IIIrd Fund Res Symp Cambridge, vol 1. FRC, Manchester, pp 269–298
Pan B, Qian K, Xie H, Asundi A (2009) Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20(6):062001. https://doi.org/10.1088/0957-0233/20/6/062001
Praast H, Göttsching L (1997) Local orientation of flocs in paper. In: Baker CF (eds) The fundamentals of papermaking materials, Trans XIth Fund Res Symp Cambridge, vol 2. FRC, Manchester, pp 1293–1324
Romanova AN, Kazakov Y, Malkov A (2020) Quantitative characteristics of local strain fields in a top-liner board sample under uniaxial tension. Lesnoy Zhurnal (Russ For J) 1:180–189. https://doi.org/10.37482/0536-1036-2020-1-180-189
Wong L, Kortschot MT, Dodson CTJ (1996) Effect of formation on local strain fields and fracture of paper. J Pulp Pap Sci 22(6):J213–J219
Yamauchi T (2012) Application of IR thermography for studying deformation and fracture of paper. In: INTECH open access publisher, Chap 1. Infrared Thermography, Rijeka, pp 3–26. https://doi.org/10.5772/29961
Yamauchi T, Murakami K (1994) Observation of deforming process of a poorly formed papersheet by thermography. Sen-i Gakkaishi 50(9):424–425