Investigation of Cu/Zn/Ag/Mo-based impregnated activated carbon for the removal of toxic gases, synthesized in aqueous media

Ma, 2019, Metal–organic framework films and their potential applications in environmental pollution control, Acc. Chem. Res., 52, 1461, 10.1021/acs.accounts.9b00113 Morris, 2019, Low-cost physicochemical treatment for removal of ammonia, phosphate and nitrate contaminants from landfill leachate, J. Environ. Sci. Health A, 1-12 Ali, 2019, Utilization of activated carbon for maximizing the efficiency of zirconium oxide for photodegradation of 4-octylphenol, J. Environ. Sci. Health A, 1-11 Rezaei, 2010, Structured adsorbents in gas separation processes, Sep. Purif. Technol., 70, 243, 10.1016/j.seppur.2009.10.004 Barea, 2014, Toxic gas removal – metal–organic frameworks for the capture and degradation of toxic gases and vapours, Chem. Soc. Rev., 43, 5419, 10.1039/C3CS60475F Li, 2018, Metal−organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions, Chem. Soc. Rev., 47, 2322, 10.1039/C7CS00543A Romero, 2013, Evaluation of the SO2 and NH3 gas adsorption properties of CuO/ZnO/Mn3O4 and CuO/ZnO/NiO ternary impregnated activated carbon using combinatorial materials science methods, ACS Comb. Sci., 15, 101, 10.1021/co3001132 Dhawan, 2017, Influence of metal impregnants on adsorption of dimethylsulfide vapors by activated carbons, Mater. Today Proc., 4, 10515, 10.1016/j.matpr.2017.06.411 Li, 2016, Adsorption of volatile organic vapors by activated carbon derived from rice husk under various humidity conditions and its statistical evaluation by linear solvation energy relationships, Sep. Purif. Technol., 170, 102, 10.1016/j.seppur.2016.06.029 Benhamed, 2016, Effect of transition metal impregnation oxidative regeneration of activated carbon by catalytic wet air oxidation, Appl. Catal. B Environ., 187, 228, 10.1016/j.apcatb.2016.01.016 Hosseini, 2015, Adsorption of carbon dioxide using activated carbon impregnated with Cu promoted by zinc, J. Taiwan Inst. Chem. E., 52, 109, 10.1016/j.jtice.2015.02.015 DeCoste, 2014, Metal–organic frameworks for air purification of toxic chemicals, Chem. Rev., 114, 5695, 10.1021/cr4006473 Romero, 2011, Gas adsorption properties of the ternary ZnO/CuO/CuCl2 impregnated activated carbon system for multi-gas respirator applications assessed through combinatorial methods and dynamic adsorption studies, ACS Combi. Sci., 13, 639, 10.1021/co200121c Thue, 2017, Effects of first-row transition metals and impregnation ratios on the physicochemical properties of microwave-assisted activated carbons from wood biomass, J. Colloid Interface Sci., 486, 163, 10.1016/j.jcis.2016.09.070 Zuo, 2015, Metal-modified active coke for simultaneous removal of SO2 and NOx from sintering flue gas, Energy Fuel, 29, 377, 10.1021/ef502103h Chiu, 2015, Simultaneous control of elemental mercury/sulfur dioxide/nitrogen monoxide from coal-fired flue gases with metal oxide-impregnated activated carbon, Aerosol Air Qual. Res., 15, 2094, 10.4209/aaqr.2015.03.0176 Liu, 2013, Carbon supported vanadia for multi-pollutants removal from flue gas, Fuel, 108, 149, 10.1016/j.fuel.2011.05.015 Sumathi, 2010, Selection of best impregnated palm shell activated carbon (PSAC) for simultaneous removal of SO2 and NOx, J. Hazard. Mater., 176, 1093, 10.1016/j.jhazmat.2009.11.037 Szmigielski, 2009, Non-carcinogenic carbon sorbents for respiratory protection, J. Hazard. Mater., 163, 471, 10.1016/j.jhazmat.2008.07.029 Zhao, 2019, Insights into the mechanism of ammonia decomposition on molybdenum nitrides based on DFT studies, J. Phys. Chem. C, 123, 554, 10.1021/acs.jpcc.8b10101 Zhao, 2016, Copper modified activated coke for mercury removal from coal-fired flue gas, Chem. Eng. J., 286, 585, 10.1016/j.cej.2015.10.107 Smith, 2010, Investigation of copper oxide impregnants prepared from various precursors for respirator carbons, J. Colloid Interface Sci., 341, 162, 10.1016/j.jcis.2009.09.028 Smith, 2011, The effect of heating temperature and nitric acid treatments on the performance of cu- and Zn-based broad spectrum respirator carbons, J. Colloid Interface Sci., 364, 178, 10.1016/j.jcis.2011.08.031 Kumar, 2015, Highly efficient performance of activated carbon impregnated with Ag, ZnO and Ag/ZnO nanoparticles as antimicrobial materials, RSC Advances, 5, 108034, 10.1039/C5RA19945J Maxwell, 2010, Effects of airborne contaminant exposure on the physical properties and filtration performance of activated, impregnated carbon, Carbon., 48, 2634, 10.1016/j.carbon.2010.03.069 Smith, 2010, The investigation of copper-based impregnated activated carbons prepared from water-soluble materials for broad spectrum respirator applications, J. Hazard. Mater., 180, 419, 10.1016/j.jhazmat.2010.04.047 Vu, 2016, Removal of gaseous sulfur and phosphorus compounds by carbon-coated porous magnesium oxide composites, Chem. Eng. J., 283, 1234, 10.1016/j.cej.2015.08.083 Nagpal, 2018, Use of metal oxides for the adsorptive removal of toxic organic pollutants, Sep. Purif. Technol., 211, 522, 10.1016/j.seppur.2018.10.016 Croll, L.M., Dahn, J.R., Siedle, A.R., Smith, J.W.H., Westreich, P., Wood, T.E., 2012. Ammonia-free gaseous air filter. US PatentNo. 20100050583. Kumar, 2013, Mesoporous CuO–ZnO binary metal oxide nanocomposite for decontamination of sulfur mustard, Mater. Chem. Phys., 142, 484, 10.1016/j.matchemphys.2013.07.034 Khan, 2013, Recent advances in decontamination of chemical warfare agents, Def. Sci. J., 63, 487, 10.14429/dsj.63.2882 Sager, 2016, Influence of the degree of infiltration of modified activated carbons with CuO/ZnO on the separation of NO2 at ambient temperatures, J. Ads. Sci. Technol., 34, 307, 10.1177/0263617416653120 Kiani, 2020, Synthesis and adsorption behavior of activated carbon impregnated with ASZM-TEDA for purification of contaminated air, Diam. Relat. Mater., 108, 107916, 10.1016/j.diamond.2020.107916