Automated data-based damage localization under ambient vibration using local modal filters and dynamic strain measurements: Experimental applications

Mascia, 2011, Identification and analysis of pathologies in bridges of urban and rural roads, Revista Ingenierá de Construcción, 26, 5, 10.4067/S0718-50732011000100001 Hellier, 2003 U.S. Department of Transportation, Federal Highway Administration, Reliability of Visual Inspection for Highway Bridges, Vol. 1, Final Report, Report FHWA-RD-01-020, 2010. Pines, 2002, Status of structural health monitoring of long-span bridges in the United States, Progress in Structural Engineering and Materials, 4, 372, 10.1002/pse.129 Rofidal, 2007, U.S. coast guard responds following the collapse of the I-35W bridge in Minnesota, USCG Reservist, 54, 26 B.F. Spencer Jr., T.T. Soong, New applications and development of active, semi-active and hybrid control techniques for seismic and non-seismic vibration in the USA, Proceedings of International Post-SMiRT Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibration of Structures, Cheju, Korea, 1999. Patten, 1996, Controlled semiactive hydraulic vibration absorber for bridges, Journal of Structural Engineering, 122, 187, 10.1061/(ASCE)0733-9445(1996)122:2(187) Doebling, 1998, A summary review of vibration-based damage identification methods, The Shock and Vibration Digest, 30, 91, 10.1177/058310249803000201 Lynch, 2006, A summary review of wireless sensors and sensor networks for structural health monitoring, Shock and Vibration Digest, 38, 91, 10.1177/0583102406061499 SensorsMag, Sensors Magazine, 〈http://www.sensorsmag.com〉 (accessed 22 July 2013). J Stein, 2001, Some recent developments in acceleration sensors, Measurement Science Review, 1, 183 Reynders, 2008, Reference-based combined deterministic-stochastic subspace identification for experimental and operational modal analysis, Mechanical Systems and Signal Processing, 22, 617, 10.1016/j.ymssp.2007.09.004 E. Reynders, M. Schevenels, G.D. Roeck., MACEC 3.1: A Matlab Toolbox for Experimental and Operational Modal Analysis, Report BWM-2010-05, Department of Civil Engineering, K.U. Leuven, 2010. Rytter, 1993 E. Reynders, G.D. Roeck, Damage identification on the Tilff bridge by vibration monitoring using finite element model updating, Proceedings of Experimental Vibration Analysis for Civil Engineering Structures, Bordeaux, France, 2005. Reynders, 2010, Finite element model updating and structural damage identification using OMAX data, Mechanical Systems and Signal Processing, 24, 1306, 10.1016/j.ymssp.2010.03.014 Fritzen, 1998, Damage detection based on model updating methods, Mechanical Systems and Signal Processing, 12, 163, 10.1006/mssp.1997.0139 H. Sohn, C.R. Farrar, F. Hemez, D. Shunk, D. Tinemates, B. Nadler, A Review of Structural Health Monitoring Literature from 1996–2001, Los Alamos National Laboratory Report LA-13976-MS, 2004. Salawu, 1997, Detection of structural damage through changes in frequency, Engineering Structures, 19, 718, 10.1016/S0141-0296(96)00149-6 Sohn, 2006, Effect of environmental and operational variability on structural health monitoring, Philosophical Transactions of the Royal Society, Series A: Mathematical, Physical and Engineering Sciences, 365, 539, 10.1098/rsta.2006.1935 Peeters, 2001, Vibration-based damage detection in civil engineering, Smart Materials and Structures, 10, 518, 10.1088/0964-1726/10/3/314 Tondreau, 2013, Local modal filters for automated data-based damage localization using ambient vibrations, Mechanical Systems and Signal Processing, 39, 162, 10.1016/j.ymssp.2013.03.020 S.J. Shelley, J.F. Schultze, R.W. Rost, R.J. Allemang, Active vibration control utilizing a discrete modal filter based control technique, Proceedings of ISMA1992, Leuven, Belgium, 1992. G.L. Slater, S.J. Shelley, Health monitoring of flexible structures using modal filter concepts, Proceedings of SPIE Smart Structures and Materials, Albuquerque, New Mexico, USA, 1993. Deraemaeker, 2006, Vibration based damage detection using large array sensors and spatial filters, Mechanical Systems and Signal Processing, 20, 1615, 10.1016/j.ymssp.2005.02.010 Deraemaeker, 2008, Vibration-based structural health monitoring using output-only measurements under changing environment, Mechanical Systems and Signal Processing, 22, 34, 10.1016/j.ymssp.2007.07.004 C.R. Farrar, S.W. Doebling, P.J. Cornwell, E.G. Straser, Variability of modal parameters measured on the Alamosa canyon bridge, Proceedings of IMAC XV, Orlando, FL, USA, 1997. G. Tondreau, A. Deraemaeker, E. Papatheou, Experimental damage detection using modal filters on an aircraft wing, Proceedings of Eurodyn2011, Leuven, Belgium, 2011. Mendrok, 2011, Experimental verification of the damage localization procedure based on modal filtering, Structural Health Monitoring, 10, 157, 10.1177/1475921710373292 Pandey, 1991, Damage detection from changes in curvature mode shapes, Journal of Sound and Vibration, 145, 321, 10.1016/0022-460X(91)90595-B A. Deraemaeker, On the use of dynamic strains and curvatures for vibration based damage localization, Proceedings of the Fifth European Workshop on Structural Health Monitoring, Sorrento, Italy, 2010, pp. 835–840. Y. Gu, L. Long, P. Tan, Surface strain distribution method for delamination detection using piezoelectric actuators and sensors, Proceedings of 9th International Conference on Damage Assessment of Structures, Oxford, UK, 2011. Montgomery, 2009 Ryan, 2000 Q. Zhang, R.J. Allemang, D.L. Brown, Modal filter: concept and application, Proceedings of IMAC VIII, Hyatt, Orlando, FL, USA, 1990. Reynders, 2007, Uncertainty bounds on modal parameters obtained from stochastic subspace identification, Mechanical Systems and Signal Processing, 22, 948, 10.1016/j.ymssp.2007.10.009 Ewins, 1984 Oppenheim, 1975 G. Tondreau, A. Deraemaeker, Vibration based damage localization using multi-scale filters and large strain sensor networks, Proceedings of the Fifth European Workshop on Structural Health Monitoring, Sorrento, Italy, 2010. G. Tondreau, A. Deraemaeker, Damage localization in bridges using multi-scale filters and large strain sensor networks, Proceedings of ISMA2010, Leuven, Belgium, 2010. Deraemaeker, 2010, Vol. 520 F. de Lorenzo, M. Calabro, Kurtosis: a statistical approach to identify defect in rolling bearings, Proceedings of 2nd International Conference on Marine Research and Transportation, Naples, Italy, 2007. Choi, 2010, Efficient calculation of statistical moments for structural health monitoring, Journal of Structural Health Monitoring, 9, 13, 10.1177/1475921709341014 Martin, 1995, Application of statistical moments to bearing failure detection, Applied Acoustics, 44, 67, 10.1016/0003-682X(94)P4420-B Tondreau, 2013 G. Tondreau, A. Deraemaeker, Experimental localization of small damages using modal filters, Proceedings of IMAC XXXI, Garden Grove, CA, USA, 2013. Measurement Specialties, 〈www.meas-spec.com〉 (accessed 22 July 2013). SDTools, Structural Dynamic Toolbox, 〈http://www.sdtools.com〉 (accessed 22 July 2013). Peeters, 2001, One-year monitoring of the Z24-Bridge, Earthquake Engineering and Structural Dynamics, 30, 149, 10.1002/1096-9845(200102)30:2<149::AID-EQE1>3.0.CO;2-Z Sohn, 1999, An experimental study of temperature effect on modal parameters of Alamosa canyon bridge, Earthquake Engineering and Structural Dynamics, 28, 879, 10.1002/(SICI)1096-9845(199908)28:8<879::AID-EQE845>3.0.CO;2-V G. Tondreau, A. Deraemaeker, Multi-scale modal filters for early damage localization, Proceedings of ISMA2012, Leuven, Belgium, 2012.