3D printing of earth-based materials: Processing aspects

Aubert, 2015, Towards a simple compressive strength test for earth bricks?, Mater. Struct., 1–14 Azeredo, 2008, Applicability of rheometers to characterizing earth mortar behavior. Part I: experimental device and validation, Mater. Struct., 41, 1465, 10.1617/s11527-007-9343-9 Bui, 2009, Compression behaviour of non-industrial materials in civil engineering by three scale experiments: the case of rammed earth, Mater. Struct., 42, 1101, 10.1617/s11527-008-9446-y Moevus, 2015, Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase, Mater. Struct., 1–14 L. Gnanli, C. Ouellet-Plamandon, C. Brumaud, G. Habert, Development of a Self-Compacted Clay based Concrete, Rheological, Mechanical and Environmental Investigations, Barcelona, Spain, 2014 C. Ouellet-Plamondon, G. Landrou, M. Palacios, Earth concrete as a promising building material, 2015. G. Landrou, C. Brumaud, G. Habert, Clay particles as binder for earth buildings materials: a fresh look into rheology of dense clay suspensions. In: EPJ Web of Conferences, 2017, EDP Sciences, p. 13010. Landrou, 2016, Lime as an anti-plasticizer for self-compacting clay concrete, Materials, 9, 330, 10.3390/ma9050330 Dove, 2016, Seaweed biopolymers as additives for unfired clay bricks, Mater. Struct., 49, 4463, 10.1617/s11527-016-0801-0 Galán-Marín, 2010, Clay-based composite stabilized with natural polymer and fibre, Constr. Build. Mater., 24, 1462, 10.1016/j.conbuildmat.2010.01.008 Achenza, 2006, on earth stabilization with natural polymers for earth masonry construction, Mater. Struct., 39, 21, 10.1617/s11527-005-9000-0 Khelifi, 2015, Mechanical enhancement of cement-stabilized soil by flax fibre reinforcement and extrusion processing, Mater. Struct, 1 Khelifi, 2013, Design of clay/cement mixtures for extruded building products, Mater Struct, 46, 999, 10.1617/s11527-012-9949-4 Maskell, 2013, Laboratory scale testing of extruded earth masonry units, Mater. Des., 45, 359, 10.1016/j.matdes.2012.09.008 Ouellet-Plamondon, 2016, Self-Compacted Clay based Concrete (SCCC): proof-of-concept, J. Clean Prod., 117, 160, 10.1016/j.jclepro.2015.12.048 Bruno, 2017, Mechanical behaviour of hypercompacted earth for building construction, Mater. Struct., 50, 160, 10.1617/s11527-017-1027-5 Khoshnevis, 2002, (2004) Automated construction by contour crafting—related robotics and information technologies, Best ISARC, 13, 5 Khoshnevis, 2006, Mega-scale fabrication by contour crafting, Int. J. Ind. Syst. Eng., 1, 301 Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater. Struct., 45, 1221, 10.1617/s11527-012-9828-z Lim, 2012, Developments in construction-scale additive manufacturing processes, Autom. Constr., 21, 262, 10.1016/j.autcon.2011.06.010 Perrot, 2016, Structural built-up of cement-based materials used for 3D-printing extrusion techniques, Mater. Struct,, 49, 1213, 10.1617/s11527-015-0571-0 Lloret, 2015, Complex concrete structures: Merging existing casting techniques with digital fabrication, Mater. Ecol., 60, 40 Wangler, 2016, Digital concrete: opportunities and challenges, RILEM Tech. Lett., 1, 10.21809/rilemtechlett.2016.16 D. Lowke, D. Weger, K. Henke, et al. 3D-Drucken von Betonbauteilen durch selektives Binden mit calciumsilikatbasierten Zementen–Erste Ergebnisse zu beton-technologischen und verfahrenstechnischen Einflüssen, 2015. Lecompte, 2017, Non-linear modeling of yield stress increase due to SCC structural build-up at rest, Cem. Concr. Res., 92, 92, 10.1016/j.cemconres.2016.11.020 Mettler, 2016, Evolution of strength and failure of SCC during early hydration, Cem. Concr. Res., 89, 288, 10.1016/j.cemconres.2016.09.004 Lootens, 2009, Yield stress during setting of cement pastes from penetration tests, Cem. Concr. Res., 39, 401, 10.1016/j.cemconres.2009.01.012 Roussel, 2006, A thixotropy model for fresh fluid concretes: theory, validation and applications, Cem. Concr. Res., 36, 1797, 10.1016/j.cemconres.2006.05.025 Leuven, 2014, Additive manufacturing of ceramics: a review, J. Ceram. Sci. Technol., 5, 245 Paoletti, 2017, Mass customization with additive manufacturing: new perspectives for multi performative building components in architecture, Procedia Eng., 180, 1150, 10.1016/j.proeng.2017.04.275 Mohammed, 2016, Applications of 3D printing technologies in oceanography, Methods Oceanogr., 17, 97, 10.1016/j.mio.2016.08.001 Peña del Olmo, 2011 Perrot, 2013, Structural build-up of rigid fiber reinforced cement-based materials, Mater. Struct., 46, 1561, 10.1617/s11527-012-9997-9 Perrot, 2016, Linking rheological and geotechnical properties of kaolinite materials for earthen construction, Mater. Struct., 49, 4647, 10.1617/s11527-016-0813-9 Funami, 2009, Rheological properties of sodium alginate in an aqueous system during gelation in relation to supermolecular structures and Ca2+ binding, Food Hydrocoll., 23, 1746, 10.1016/j.foodhyd.2009.02.014 Wolfs, 2018, Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing, Cem. Concr. Res., 106, 103, 10.1016/j.cemconres.2018.02.001