A finite element procedure for the analysis of thermo-mechanical solids in contact

Bathe, 1996 Rabinowicz, 1965 Suh, 1986 Oden, 1985, Models for computational methods for dynamic friction phenomena, Computer Methods in Applied Mechanics and Engineering, 52, 527, 10.1016/0045-7825(85)90009-X Pantuso D, Bathe KJ. Finite element analysis of thermo-elasto-plastic solids in contact. In: Owen DRJ, Onate E, editors. Computational plasticity, CIMNE, 1997, p. 72–87 Eterovic, 1990, On large strain elasto-plastic analysis with frictional contact conditions, 379 Eterovic, 1991, On the treatment of inequality constraints arising from contact conditions in finite element analysis, Computers and Structures, 40, 203, 10.1016/0045-7949(91)90347-O Anand, 1993, A constitutive model for interface friction, Computational Mechanics, 12, 123, 10.1007/BF00369962 Anand, 1993, A constitutive model for friction in forming, Annals of the CIRP, 42, 361, 10.1016/S0007-8506(07)62462-7 Wriggers, 1994, Contact constraints within coupled thermomechanical analysis — a finite element model, Computer Methods in Applied Mechanics and Engineering, 113, 301, 10.1016/0045-7825(94)90051-5 Miles, 1995, Finite element calculation of thermal coupling between workpiece and tools in forging, Engineering Computations, 12, 687, 10.1108/02644409510104703 Zavarise, 1995, On augmented Lagrangian algorithms for thermomechanical contact problems with friction, International Journal for Numerical Methods in Engineering, 38, 2929, 10.1002/nme.1620381706 Bathe, 1984, On finite element analysis of large deformation frictional contact problems, 165 Bathe, 1985, A solution method for planar and axisymmetric contact problems, International Journal for Numerical Methods in Engineering, 21, 65, 10.1002/nme.1620210107 Oden, 1980, Exterior penalty methods for contact problems in elasticity Kikuchi, 1982, A smoothing technique for reduced integration penalty methods in contact problems, International Journal for Numerical Methods in Engineering, 18, 343, 10.1002/nme.1620180303 Simo, 1985, A perturbed Lagrangian formulation for the finite element solution of contact problems, Computer Methods in Applied Mechanics and Engineering, 50, 163, 10.1016/0045-7825(85)90088-X Simo, 1992, An augmented Lagrangian treatment of contact problems involving friction, Computers and Structures, 42, 97, 10.1016/0045-7949(92)90540-G Wriggers, 1985, Penalty and augmented Lagrangian formulations for contact problems, 97 Lehmann Th. General frame for the definition of constitutive laws for large non-isothermic elastic–plastic and elastic–viscoplastic deformations. Lehmann Th, editor. The Constitutive Law in Thermoplasticity, CISM Courses and Lectures No 281, 1984. p. 379-463 Anand, 1985, Constitutive equations for hot-working of metals, International Journal of Plasticity, 1, 213, 10.1016/0749-6419(85)90004-X Mikic, 1974, Thermal contact conductance: theoretical considerations, International Journal of Heat and Mass Transfer, 17, 205, 10.1016/0017-9310(74)90082-9 Truesdell, 1992 Bathe, 1999, Finite element analysis of fluid flows fully coupled with structural interactions, Computers and Structures, 72, 1, 10.1016/S0045-7949(99)00042-5 Asaro RJ. Micromechanics of crystals and polycrystals. Adv. Applied Mechanics. 1983;23(1) Simo, 1985, On the computational significance of the intermediate configuration and hyperelastic stress relations in finite deformation elastoplasticity, Mech. Mater, 4, 439, 10.1016/0167-6636(85)90039-0 Carslaw, 1947 Madhusudana, 1986, Contact heat transfer—the last decade, AIAA Journal, 24, 510, 10.2514/3.9298 Cheng, 1985, An incremental constitutive relation of unilateral contact friction for large deformation analysis, Journal of Applied Mechanics, 52, 639, 10.1115/1.3169114 Sussman, 1987, A finite element formulation for nonlinear incompressible elastic and inelastic analysis, Computers and Structures, 26, 357, 10.1016/0045-7949(87)90265-3 Pantuso, 1995, A four-node quadrilateral mixed-interpolated element for solids and fluids, Mathematical Models and Methods in Applied Sciences, 5, 1113, 10.1142/S0218202595000589 Pantuso, 1997, On the stability of mixed finite elements in large strain analysis of incompressible solids, Finite Elements in Analysis and Design, 28, 83, 10.1016/S0168-874X(97)81953-1 Bathe, 1997, On the constraint function method for contact problems, Computers and Structures, 64, 1069, 10.1016/S0045-7949(97)00036-9 Atluri, 1984, Alternate stress and conjugate strain measures, and mixed variational formulations involving rigid rotations, for computational analysis of finitely deformed solids, with application to plates and shells: Part I — theory, Computers and Structures, 18, 93, 10.1016/0045-7949(84)90085-3 Eterovic, 1990, A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic–kinematic hardening using the logarithmic stress and strain measures, International Journal for Numerical Methods in Engineering, 30, 1099, 10.1002/nme.1620300602