Fatigue properties of Ti6Al4V cellular specimens fabricated via SLM: CAD vs real geometry

Ahmadi, 2015, Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties, Materials, 8, 1871, 10.3390/ma8041871 Benedetti, 2017, The effect of post-sintering treatments on the fatigue and biological behavior of Ti- 6Al-4V ELI parts made by selective laser melting, J, Mech. Behav. Biomed. Mater., 71, 295, 10.1016/j.jmbbm.2017.03.024 Beretta, 1998, Statistical analysis of defects for fatigue strength prediction and qualityt control of materials, Fatigue & Fracture of Engineering Materials & Structures, 21, 1049, 10.1046/j.1460-2695.1998.00104.x De Chiffre, 2014, Industrial applications of computed tomography, CIRP Annals Man. Tech., 63, 655, 10.1016/j.cirp.2014.05.011 Dowling, 2013 Kerckhofs, G. et al, 2008. Validation of x-ray microfocus computed tomography as an imaging tool for porous structures, Review of Scientific Instruments 79. Khademzadeh, 2016, Micro porosity analysis in additive manufactured NiTi parts using micro computed tomography and electron microscopy, Materials & Design, 90, 745, 10.1016/j.matdes.2015.10.161 de Krijger, J., Rans, C., Van Hooreweder, B., Lietaert, K., Pouran, B., Zadpoor, A. A., 2016. Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading, Journal of the mechanical behavior of biomedical materials. Leuders, 2013, On the mechanical behaviour of titanium alloy Ti6Al4V manufactured by selective laser melting: Fatigue resistance and crack growth perfirmance, International Journal of Fatigue, 48, 300, 10.1016/j.ijfatigue.2012.11.011 Long, 1998, Titanium alloys in total joint replacement–a materials science perspective, Biomaterials, 19, 1621, 10.1016/S0142-9612(97)00146-4 Maxwell, 1999 Murakami, 2002 Murr, 2010, Characterization of Ti6Al4V open cellular foams fabricated by additive manufacturing using electron beam melting, Materials Science and Engineering A, 527, 1861, 10.1016/j.msea.2009.11.015 Niinomi, M., 2008. Mechanical biocompatibilities of titanium alloys for biomedical applications, Journal of the Mechanical Behavior of Biomedical Materials I, pp. 30-42. Qiu, 2013, Microstructure and tensile properties of selectively laser-melted and HIPed laser-melted Ti6Al4V, Materials Science & Engineering, A 578, 230, 10.1016/j.msea.2013.04.099 Ryan, 2006, Fabrication methods of porous metals for use in Orthopaedic applications, Biomaterials, 27, 2651, 10.1016/j.biomaterials.2005.12.002 Schajer, 2013, Hole-drilling Residual Stress Measurement with Artifact Correction Using Full-field DIC Experimental Mechanics, 53, 255 Singh, R., Lee, P. D., Dashwood, R. J., Lindley, T. C., 2010. Titanium fomas for biomedical applications: a review, Materials Technology 25, No. 3/4. Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., Yeong, W. Y., 2017. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: A state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility, Materials Science and Engineering C [In Press]. Van Hooreweder, 2017, Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting, Acta Biomaterialia, 47, 193, 10.1016/j.actbio.2016.10.005 Winiarski, 2016, High spatial resolution evaluation of residual stresses in shot peened specimens containing sharp and blunt notches by micro-hole drilling, micro-slot cutting and micro-X-ray diffraction methods, Experimental Mechanics, 56, 1449, 10.1007/s11340-016-0182-x Winiarski, 2012, Surface Decoration for Improving the Accuracy of Displacement Measurements by Digital Image Correlation in SEM, Experimental Mechanics, 52, 793, 10.1007/s11340-011-9568-y Winiarski, 2012, Micron-Scale Residual Stress Measurement by Micro-Hole Drilling and Digital Image Correlation, Experimental Mechanics, 52, 417, 10.1007/s11340-011-9502-3 Wits, 2016, Porosity testing methods for the quality assessment of selective laser melted parts, CIRP Annals Man, Tech., 65, 201 Zargarian, 2016, Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures, Materials Science and Engineering C, 60, 339, 10.1016/j.msec.2015.11.054 Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., Murr, L. E., 2016a. Microstructure and mechanical properties of open cellular Ti6Al4V prototypes fabricated by electron beam melting for biomedical applications, Materials Technology: Advanced Performance Materials 31, No. 2. Zhao, 2016, Comparison of the microstructures and mechanical properties of Ti6Al4V fabricated by selective laser melting and electron beam melting, Materials and Design, 95, 21, 10.1016/j.matdes.2015.12.135