Controllable synthesis of a robust sucrose-derived bio-carbon foam with 3D hierarchical porous structure for thermal insulation, flame retardancy and oil absorption

Inagaki, 2015, Carbon foam: Preparation and application, Carbon, 87, 128, 10.1016/j.carbon.2015.02.021 Chen, 2020, Nitrogen-rich hierarchically porous carbon foams as high-performance electrodes for lithium-based dual-ion capacitor, J. Energy Chem., 48, 187, 10.1016/j.jechem.2020.01.024 Bukhanko, 2017, Gas phase synthesis of isopropyl chloride from isopropanol and HCl over alumina and flexible 3-D carbon foam supported catalysts, Appl. Catal. A, 542, 212, 10.1016/j.apcata.2017.05.013 Wilson, 2018, Low-density microcellular carbon foams from sucrose by NaCl particle templating using glycerol as a plasticizing additive, Mater. Des., 139, 25, 10.1016/j.matdes.2017.10.063 Sha, 2017, Three-dimensional rebar graphene, ACS Appl. Mater. Interfaces, 9, 7376, 10.1021/acsami.6b12503 Ge, 2017, Joule-heated graphene-wrapped sponge enables fast clean-up of viscous crude-oil spill, Nat. Nanotechnol., 12, 434, 10.1038/nnano.2017.33 Ji, 2019, Dental resin monomer enables unique NbO2/carbon lithium-ion battery negative electrode with exceptional performance, Adv. Funct. Mater., 29, 1904961, 10.1002/adfm.201904961 Zhang, 2019, A facile and mild strategy to fabricate an underwater superoleophobic and underoil superhydrophobic mesh with outstanding anti-viscous oil-fouling properties for switchable high viscosity oil/water separation, Green Chem., 21, 5080, 10.1039/C9GC02129A Zhu, 2020, Coal-based ultrathin-wall graphitic porous carbon for high-performance form-stable phase change materials with enhanced thermal conductivity, Chem. Eng. J., 395, 125112, 10.1016/j.cej.2020.125112 Meng, 2019, Ultra-low-cost coal-based carbon electrodes with seamless interfacial contact for effective sandwich-structured perovskite solar cells, Carbon, 145, 290, 10.1016/j.carbon.2019.01.047 Kumar, 2019, Thermal conductivity and fire-retardant response in graphite foam made from coal tar pitch derived semi coke, Compos. B Eng., 172, 121, 10.1016/j.compositesb.2019.05.036 Li, 2016, A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries, J. Mater. Chem. A, 4, 96, 10.1039/C5TA08601A Lou, 2020, Phenolic foam-derived magnetic carbon foams (MCFs) with tunable electromagnetic wave absorption behavior, Chem. Eng. J., 391, 123571, 10.1016/j.cej.2019.123571 Inagaki, 2013, Aromatic polyimides as carbon precursors, Carbon, 61, 1, 10.1016/j.carbon.2013.05.035 Zúñiga Ruiz, 2015, Closed-cell carbon foams from diphenolic acid-based polybenzoxazine, Carbon, 95, 919, 10.1016/j.carbon.2015.09.012 Yu, 2019, Fabrication of coal tar pitch–derived reticulated carbon foam as oxidation-resistant thermal insulation, J. Anal. Appl. Pyrol., 141, 104643, 10.1016/j.jaap.2019.104643 Klett, 2000, High-thermal-conductivity, mesophase-pitch-derived carbon foams: effect of precursor on structure and properties, Carbon, 38, 953, 10.1016/S0008-6223(99)00190-6 Zhang, 2020, Multifunctional microcellular PVDF/Ni-chains composite foams with enhanced electromagnetic interference shielding and superior thermal insulation performance, Chem. Eng. J., 379, 122304, 10.1016/j.cej.2019.122304 Zhu, 2019, High-mechanical-strength polyimide aerogels crosslinked with 4, 4′-oxydianiline-functionalized carbon nanotubes, Carbon, 144, 24, 10.1016/j.carbon.2018.11.057 Kim, 2018, Synthesis and characterization of eco-friendly carboxymethyl cellulose based carbon foam using electron beam irradiation, Compos. B Eng., 151, 154, 10.1016/j.compositesb.2018.06.013 Zimmermann, 2020, Carbon foam production by biomass pyrolysis, J. Porous Mater., 27, 1119, 10.1007/s10934-020-00888-y Jana, 2016, Design of carbon foams for seasonal solar thermal energy storage, Carbon, 109, 771, 10.1016/j.carbon.2016.08.048 Wilson, 2017, Carbon foams with a triplex pore structure by compression molding of molten sucrose–NaCl powder pastes, Carbon, 118, 545, 10.1016/j.carbon.2017.03.084 Narasimman, 2012, Preparation of low density carbon foams by foaming molten sucrose using an aluminium nitrate blowing agent, Carbon, 50, 1999, 10.1016/j.carbon.2011.12.058 Narasimman, 2014, Carbon foam with microporous cell wall and strut for CO2 capture, RSC Adv., 4, 578, 10.1039/C3RA46240D Narasimman, 2016, Carbon composite foams with improved strength and electromagnetic absorption from sucrose and multi-walled carbon nanotube, Mater. Chem. Phys., 181, 538, 10.1016/j.matchemphys.2016.06.091 Narasimman, 2014, Carbon particle induced foaming of molten sucrose for the preparation of carbon foams, Mater. Sci. Eng., B, 189, 82, 10.1016/j.mseb.2014.08.007 Narasimman, 2015, Carbon-carbon composite foams with high specific strength from sucrose and milled carbon fiber, Mater. Lett., 144, 46, 10.1016/j.matlet.2015.01.016 Cui, 2012, Gel-cast-foam-assisted combustion synthesis of elongated β-Si3N4 crystals and their effects on improving the thermal conductivity of silicone composites, J. Alloy. Compd., 540, 165, 10.1016/j.jallcom.2012.04.123 Yuan, 2018, Combustion reaction-derived nitrogen-doped porous carbon as an effective metal-Free catalyst for the oxygen reduction reaction, Energy, 152, 333, 10.1016/j.energy.2018.03.175 Tadyszak, 2020, Sucrose based cellular glassy carbon for biological applications, Mater. Chem. Phys., 239, 122033, 10.1016/j.matchemphys.2019.122033 Hu, 2018, Multistimuli-responsive intrinsic self-healing epoxy resin constructed by host-guest interactions, Macromolecules, 51, 5294, 10.1021/acs.macromol.8b01124 Jana, 2011, The production of a carbon-coated alumina foam, Carbon, 49, 3292, 10.1016/j.carbon.2011.04.005 Kaur, 2019, Biomass derived hierarchical porous carbon materials as oxygen reduction reaction electrocatalysts in fuel cells, Prog. Mater Sci., 102, 1, 10.1016/j.pmatsci.2018.12.002 Hemmler, 2017, Evolution of complex maillard chemical reactions, resolved in time, Sci. Rep., 7, 3227, 10.1038/s41598-017-03691-z Deng, 2016, Biomass-derived carbon: synthesis and applications in energy storage and conversion, Green Chem., 18, 4824, 10.1039/C6GC01172A Liu, 2020, Carbon foams: 3D porous carbon materials holding immense potential, J. Mater. Chem. A, 8, 23699, 10.1039/D0TA08749A Narasimman, 2013, Preparation of carbon foams with enhanced oxidation resistance by foaming molten sucrose using a boric acid blowing agent, Carbon, 55, 305, 10.1016/j.carbon.2012.12.068 Duan, 2020, Simple routes from natural graphite to graphite foams: Preparation, structure and properties, Carbon, 159, 527, 10.1016/j.carbon.2019.12.091 Liu, 2019, 3D hierarchical porous-structured biochar aerogel for rapid and efficient phenicol antibiotics removal from water, Chem. Eng. J., 368, 639, 10.1016/j.cej.2019.03.007 Yang, 2020, Kinetic enhancement of sulfur cathodes by N-doped porous graphitic carbon with bound VN nanocrystals, Small, 16, 2004950, 10.1002/smll.202004950 Chithra, 2020, Carbon foams with low thermal conductivity and high EMI shielding effectiveness from sawdust, Ind. Crops Prod., 145, 112076, 10.1016/j.indcrop.2019.112076 Chithra, 2018, Robust thermally insulating carbon-gehlenite composite foams from newspaper waste and sucrose by filter-pressing, Mater. Des., 160, 65, 10.1016/j.matdes.2018.09.005 Vijayan, 2017, Ultralight SiC foams with improved strength from sucrose and silicon powder using magnesium nitrate blowing agent, Mater. Lett., 194, 126, 10.1016/j.matlet.2017.02.032 Yao, 2016, Fabrication of carbon foams with high mechanical properties derived from sucrose/polyacrylamide hydrogel, Diam. Relat. Mater., 64, 153, 10.1016/j.diamond.2016.02.014 Vijayan, 2016, Low-Density Open Cellular Silicon Carbide Foams from Sucrose and Silicon Powder, J. Am. Ceram. Soc., 99, 3866, 10.1111/jace.14450 Vijayan, 2016, Fabrication of large alumina foams by pyrolysis of thermo-foamed alumina–sucrose, J. Mater. Res., 31, 302, 10.1557/jmr.2015.395 Narasimman, 2012, Preparation of carbon foams by thermo-foaming of activated carbon powder dispersions in an aqueous sucrose resin, Carbon, 50, 5583, 10.1016/j.carbon.2012.08.010 Han, 2017, Laminated and two-dimensional carbon-supported microwave absorbers derived from MXenes, ACS Appl. Mater. Interfaces, 9, 20038, 10.1021/acsami.7b04602 Deng, 2020, Sandwich-like Fe&TiO2@C nanocomposites derived from MXene/Fe-MOFs hybrids for electromagnetic absorption, Nanomicro. Lett., 12, 55 Cheng, 2019, Tandem chemical modification/mechanical exfoliation of graphite: Scalable synthesis of high-quality, surface-functionalized graphene, Carbon, 145, 668, 10.1016/j.carbon.2019.01.079 Yuan, 2016, Multifunctional stiff carbon foam derived from bread, ACS Appl. Mater. Interfaces, 8, 16852, 10.1021/acsami.6b03985 Xu, 2017, Lightweight and ultrastrong polymer foams with unusually superior flame retardancy, ACS Appl. Mater. Interfaces, 9, 26392, 10.1021/acsami.7b06282 Wang, 2020, Biomimetic structural cellulose nanofiber aerogels with exceptional mechanical, flame-retardant and thermal-insulating properties, Chem. Eng. J., 389, 124449, 10.1016/j.cej.2020.124449 Guo, 2019, A theoretical model for gas-contributed thermal conductivity in nanoporous aerogels, Int. J. Heat Mass Transf., 137, 64, 10.1016/j.ijheatmasstransfer.2019.03.106 Obori, 2019, Parametric model to analyze the components of the thermal conductivity of a cellulose-nanofibril aerogel, Phys. Rev. Appl, 11, 10.1103/PhysRevApplied.11.024044 Apostolopoulou‐Kalkavoura, 2021, Thermally insulating nanocellulose-based materials, Adv. Mater., 33, 2001839, 10.1002/adma.202001839 Malek, 2003, Knudsen self- and Fickian diffusion in rough nanoporous media, J. Chem. Phys., 119, 2801, 10.1063/1.1584652 Wicklein, 2015, Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide, Nat. Nanotechnol., 10, 277, 10.1038/nnano.2014.248 Zuo, 2020, Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications, Small, 16, 1903849, 10.1002/smll.201903849