Electroless nickel-phosphorus coating on poly (ether ether ketone)/carbon nanotubes composite

Springer Science and Business Media LLC - Tập 10 - Trang 631-636 - 2014
Tong Zhai1, Lizhi Di2, De’an Yang1
1Key Laboratory of Advanced Ceramics and Machining Technology Ministry of Education, Tianjin University, Tianjin, PR China
2Tianjin Medical College, Tianjin, PR China

Tóm tắt

In order to improve electromagnetic shielding property of poly (ether ether ketone)/carbon nanotubes composite, a nickel-phosphorus coating was covered on the composite by electroless plating. The morphologies of the substrates and the coatings were characterized by SEM. XPS was performed to analyze the surface composition and chemical states before and after chemical etching. The results showed that lots of microscopic holes appeared and evenly distributed on the surface, and the concentration of hydrophilic groups on the surface increased after the composite was etched. Thermal shock test showed that the adhesive strength between the coating and the composite was good.

Tài liệu tham khảo

D. P. Jones, D. C. Leach, and D. R. Moore, Polymer 26, 1385 (1985). O. B. Searle and R. H. Pfeiffer, Polym. Eng. Sci. 25, 474 (1985). A. M. Diez-Pascual, B. Ashrafi, M. Naffakh, J. M. Gonzalez-Dominguez, A. Johnston, B. Simard, M. T. Martinez, and M. A. Gomez-Fatou, Carbon 49, 2817 (2011). A. M. Diez-Pascual, M. Naffakh, C. Marco, G. Ellis, and M. A. Gomez-Fatou, Prog. Mater. Sci. 57, 1106 (2012). A. M. Diez-Pascual, M. Naffakh, M. A. Gomez, C. Marco, G. Ellis, M. T. Martinez, A. Anson, J. M. Gonzalez-Dominguez, Y. Martinez-Rubi, and B. Simard, Carbon 47, 3079 (2009). A. M. Diez-Pascual, M. Naffakh, M. A. Gomez, C. Marco, G. Ellis, J. M. Gonzalez-Dominguez, A. Anson, M.T. Martinez, Y. Martinez-Rubi, B. Simard, and B. Ashrafi, Nanotechnology 20, 315707 (2009). C. Rong, G. Ma, S. Zhang, L. Song, Z. Chen, G. Wang, and P. Ajayan, Compos. Sci. Technol. 70, 380 (2010). M. Mohiuddin and S. Hoa, Compos. Sci. Technol. 72, 21 (2011). H. S. Wang, G. B. Wang, W. L. Li, Q. T. Wang, W. Wei, Z. H. Jiang, and S. L. Zhang, J. Mater. Chem. 22, 21232 (2012). Y. Li, C. Chen, S. Zhang, Y. Ni, and J. Huang, Appl. Surf. Sci. 254, 5766 (2008). S. Geetha, K. K. S. Kumar, C. R. K. Rao, M. Vijayan, and D. C. Trivedi, J. Appl. Polym. Sci. 112, 2073 (2009). K. H. Krishnan, S. John, K. N. Srinivasan, J. Praveen, M. Ganesan, and P. M. Kavimani, Metall. Mater. Trans. APhys. Metall. Mater. Sci. 37A, 1917 (2006). A. Małecki and A. Micek-Ilnicka, Surface and Coatings Technology 123, 72 (2000). E. K. Lee, D. C. Lim, K. H. Lee, and J.-H. Lim, Electron. Mater. Lett. 8, 391 (2012). A. A. Zuleta, E. Correa, M. Sepulveda, L. Guerra, J. G. Castano, F. Echeverria, P. Skeldon, and G. E. Thompson, Corrosion Science 55, 194 (2012). X. J. Tang, C. L. Bi, C. X. Han, and B. G. Zhang, Mater. Lett. 63, 840 (2009). M. Islam and T. Shehbaz, Surface and Coatings Technology 205, 4397 (2011). S. Jiang and R. Guo, Surface and Coatings Technology 205, 4274 (2011). R. H. Guo, S. Q. Jiang, C. W. M. Yuen, and M. C. F. Ng, J. Mater. Sci.-Mater. Electron. 20, 735 (2009). B. Jackson and P. Kuzyk, Ninth International Conference on Electromagnetic Compatibility, p. 119, IET, Manchester, UK (1994). D. Markham, Mater. Des. 21, 45 (2000). D. Shukla, Y. S. Negi, J. Sen Uppadhyaya, and V. Kumar, Polym. Rev. 52, 189 (2012). H. Nakanishi, Y. C. Jean, E. G. Smith, and T. C. Sandreczki, J. Polym. Sci. Part B: Polym. Phys. 27, 1419 (1989). N. Shibuya and R. S. Porter, Macromolecules 25, 6495 (1992). L. Z. Di, B. Liu, J. J. Song, D. Shan, and D. A. Yang, Appl. Surf. Sci. 257, 4272 (2011).