Viscoelastic properties of recycled asphalt binder containing waste engine oil

Borhan, 2009, The effects of used cylinder oil on asphalt mixes, Eur. J. Sci. Res., 28, 389 Collins, J.H., Jones, G.R., 2000. Asphalt Composition and Method. US patent 6074469. Dedene, 2014, The performance of aged asphalt materials rejuvenated with waste engine oil, Int. J. Pavement Res. Technol., 7, 145 Dominguez-Rosado, 2003, Chemical characterization of fresh, used and weathered motor oil via GC/MS, NMR and FTIR techniques, Proc Indiana Acad. Sci., 112, 109 Demirbas, 2005, Recent advances in recycling and re-refining processes of petroleum based wastes (PBW), Energy Sources, 27, 261, 10.1080/00908310390268128 Fernandes, 2017, Improving asphalt mixture performance by partially replacing bitumen with waste motor oil and elastomer modifiers, Appl. Sci., 7, 794, 10.3390/app7080794 Fox, 2007, Sustainability and environmental aspects of lubricants Hamawand, 2013, Recycling of waste engine oils using a new washing agent, Energies, 6, 1023, 10.3390/en6021023 Hayner, R.E., 1999. Process for paving with asphalt containing mineral lubricating oil base stock. US patent 5911817. Hesp, 2010, X-ray fluorescence detection of waste engine oil residue in asphalt and its effect on cracking in service, Int. J. Pavement Eng., 11, 541, 10.1080/10298436.2010.488729 IS 73, 2013 Jia, 2014, Infrared spectra and rheological properties of asphalt cement containing waste engine oil residues, Constr. Build. Mater., 50, 683, 10.1016/j.conbuildmat.2013.10.012 Kuczenski, 2014, Material flow analysis of lubricating oil use in California, Resour. Conserv. Recycl., 93, 59, 10.1016/j.resconrec.2014.10.001 Lam, 2010, Pyrolysis using microwave heating: a sustainable process for recycling used car engine oil, Ind. Eng. Chem. Res., 49, 10845, 10.1021/ie100458f Lamontagne, 2001, Comparison by Fourier transform infrared (FTIR) spectroscopy of different ageing techniques: application to road bitumens, Fuel, 80, 483, 10.1016/S0016-2361(00)00121-6 Leontaritis, 1988, Asphaltene deposition: a survey of field experiences and research approaches, J. Pet. Sci. Eng., 1, 229, 10.1016/0920-4105(88)90013-7 Lesueur, 2009, The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification, Adv. Colloid Interface Sci., 145, 42, 10.1016/j.cis.2008.08.011 Maceiras, 2017, Recycling of waste engine oil for diesel production, Waste Manag., 60, 351, 10.1016/j.wasman.2016.08.009 Maharaj, 2015, Physical properties of low density polyethylene, polyvinylchloride and used engine oil modified asphalt, Prog. Rubber Plast. Recycl. Technol., 31, 173, 10.1177/147776061503100303 Mogawer, 2012, Performance characteristics of plant produced high RAP mixtures, Road Mater. Pavement Des., 13, 183, 10.1080/14680629.2012.657070 Ouyang, 2006, Improving the aging resistance of asphalt by addition of Zinc dialkyldithiophosphate, Fuel, 85, 1060, 10.1016/j.fuel.2005.08.023 Paliukaite, 2016, Effect of recycled engine oil bottoms on the ductile failure properties of straight and polymer-modified asphalt cements, Constr. Build. Mater., 126, 190, 10.1016/j.conbuildmat.2016.08.156 Park, 1999, Interconversion between relaxation modulus and creep compliance for viscoelastic solids, J. Mater. Civ. Eng., 11, 76, 10.1061/(ASCE)0899-1561(1999)11:1(76) Pellinen, 2004, 83 Teoh, 2018, Catalyzed waste engine oil as alternative binder of roofing tiles–chemical analysis and optimization of parameters, J. Clean. Prod., 174, 988, 10.1016/j.jclepro.2017.11.015 Rincon, 2005, Regeneration of used lubricant oil by polar solvent extraction, Ind. Eng. Chem. Res., 44, 4373, 10.1021/ie040254j Silva, 2012, Are totally recycled hot mix asphalts a sustainable alternative for road paving?, Resour. Conserv. Recycl., 60, 38, 10.1016/j.resconrec.2011.11.013 Socrates, 2004 Ssempebwa, 2009, The generation, use and disposal of waste crankcase oil in developing countries: a case for Kampala district, Uganda, J. Hazard. Mater., 161, 835, 10.1016/j.jhazmat.2008.04.028 U.S. Department of Energy, 2006 Villanueva, 2008, Asphalt modification with used lubricating oil, Can. J. Civ. Eng., 35, 148, 10.1139/L07-092 Williams, 1955, The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, J. Am. Chem. Soc., 77, 3701, 10.1021/ja01619a008 Zargar, 2012, Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen, J. Hazard. Mater., 233–234, 254, 10.1016/j.jhazmat.2012.06.021 Zaumanis, 2013