CFD based evaluation of heat transfer coefficient from cylindrical particles

McKenna, 1999, Heat transfer from catalysts with computational fluid dynamics, AIChE Journal, 45, 2392, 10.1002/aic.690451113 Guardo, 2005, Influence of the turbulence model in CFD modeling of wall-to-fluid heat transfer in packed beds, Chemical Engineering Science, 60, 1733, 10.1016/j.ces.2004.10.034 Romkes, 2003, CFD modeling and experimental validation of particle-to-fluid mass and heat transfer in a packed bed at very low channel to particle diameter ratio, Chemical Engineering Journal, 96, 3, 10.1016/j.cej.2003.08.026 Nijemeisland, 2004, Catalyst design by CFD for heat transfer and reaction in steam reforming, Chemical Engineering Science, 59, 5185, 10.1016/j.ces.2004.07.088 FEMLAB MultiPhysics V2.3, Modeling Guide Manual, 2002. Sparrow, 2004, Archival correlations for average heat transfer coefficients for non-circular and circular cylinders and for spheres in cross-flow, International Journal of Heat and Mass Transfer, 47, 5285, 10.1016/j.ijheatmasstransfer.2004.06.024 Zhukauskas, 1972, Heat transfer from tubes in crossflow, vol. 8 Whitaker, 1976 Chang, 2004, Effect of aspect ratio on forced convection heat transfer from cylinders, International Journal of Heat and Mass Transfer, 47, 1289, 10.1016/j.ijheatmasstransfer.2003.09.013 Wiberg, 2005, Heat transfer from a cylinder in axial turbulent flows, International Journal of Heat and Mass Transfer, 48, 1505, 10.1016/j.ijheatmasstransfer.2004.10.015