Towards a methodology for the systematic analysis and design of efficient chemical processes

Hannsjörg Freund1, Kai Sundmacher1,2
1Max Planck Institute for Dynamics of Complex Technical Systems, Physical and Chemical Process Engineering, Sandtorstraße 1, 39106 Magdeburg, Germany
2Chair for Process Systems Engineering, Otto-von-Guericke University Magdeburg, Universitätsplatz 2, 39106 Magdeburg, Germany

Tài liệu tham khảo

1980 1989 Cohen, 1996, The early history of chemical engineering: a reassessment, Brit. J. Hist. Sci., 29, 171, 10.1017/S000708740003421X Hofmann, 1997, Zum Verhältnis von Verfahrenstechnik, Chemie-Ingenieur-Wesen und Technischer Chemie, 163 Kim, 2002, Chemical engineering: a rich and diverse history, Chem. Eng. Prog., 98, 2S Scriven, 2003 Schwedt, 2006, Bonn, Chem. Unserer Zeit, 40, 350, 10.1002/ciuz.200690066 W. Pafko, http://www.pafko.com/history/. Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA. http://web.mit.edu/cheme/che/history.html. W.N. Delgass, N.A. Peppas, School of Chemical Engineering, Purdue University, West Lafayette, IN. https://engineering.purdue.edu/ChE/AboutUs/history.html. Churchill, 2007, Role of universalities in chemical engineering, Ind. Eng. Chem. Res., 46, 7851, 10.1021/ie070522o Varma, 2007, Evolving trends in chemical engineering education and the energy challenge Wei, 2008, Chemical engineering education in post-industrial America, Ind. Eng. Chem. Res., 47, 1, 10.1021/ie0713238 Davis, 1901 Walker, 1923 Hougen, 1931 Hougen, 1943 Thiele, 1939, Relation between catalytic activity and size of particle, Ind. Eng. Chem., 31, 916, 10.1021/ie50355a027 Langmuir, 1908, The velocity of reactions in gases moving through heated vessels and the effect of convection and diffusion, J. Am. Chem. Soc., 30, 1742, 10.1021/ja01953a011 Bird, 1960 McCabe, 1956 Smith, 1956 Levenspiel, 1962 Wintermantel, 1999, Process and product engineering—achievements, present and future challenges, Chem. Eng. Sci., 54, 1601, 10.1016/S0009-2509(98)00412-6 1935 1932, vol. 1–13 Das Institut für Chemische Technologie der Technischen Universität Darmstadt, Vom Beginn 1900 bis zum Jahr 2000, Darmstadt, 2000, pp. 1–14. (pdf-file available at: http://www.ct.chemie.tu-darmstadt.de/local/geschichte/geschichte.pdf). Gilles, 1974, Quasi stationary behavior of wandering combustion zones, Chem. Eng. Sci., 29, 1211, 10.1016/0009-2509(74)80120-X Gilles, 1978, Relaxation oscillations in chemical reactors, AIChE J., 24, 912, 10.1002/aic.690240517 Tsouris, 2003, Process intensification—has its time finally come?, Chem. Eng. Prog., 99, 50 Stankiewicz, 2006, Process Intensification in Europe Leszczynski, 1973, Role of chemical engineering and chemical process machinery in industrial application and in process intensification, Przem. Chem., 52, 161 Ramshaw, 1983, Higee distillation—an example of process intensification, Chem. Eng. London, 13 2004 2007 Stankiewicz, 2000, Process intensification: transforming chemical engineering, Chem. Eng. Prog., 96, 22 Rogers, 2003, Ionic liquids—solvents of the future?, Science, 302, 792, 10.1126/science.1090313 Wasserscheid, 2007, Continuous reactions using ionic liquids as catalytic phase, J. Ind. Eng. Chem., 13, 325 Schwuger, 1995, Microemulsions in technical processes, Chem. Rev., 95, 849, 10.1021/cr00036a003 Watarai, 1997, Microemulsions in separation sciences, J. Chromatogr. A, 780, 93, 10.1016/S0021-9673(97)00444-5 Darr, 1999, New directions in inorganic and metal-organic coordination chemistry in supercritical fluids, Chem. Rev., 99, 495, 10.1021/cr970036i Savage, 1995, Reactions at supercritical conditions: applications and fundamentals, AIChE J., 41, 1723, 10.1002/aic.690410712 Albanese, 2006, New applications of phase transfer catalysis in organic synthesis, Mini-Rev. Org. Chem., 3, 195, 10.2174/1570193X10603030195 Behr, 2006, Thermoregulated liquid/liquid catalyst separation and recycling, Adv. Synth. Catal., 348, 1485, 10.1002/adsc.200606094 Stankiewicz, 2006, Energy matters—alternative sources and forms of energy for intensification of chemical and biochemical processes, Chem. Eng. Res. Des., 84, 511, 10.1205/cherd.05214 Cecilia, 2007, Possibilities of process intensification using microwaves applied to catalytic microreactors, Chem. Eng. Process., 46, 870, 10.1016/j.cep.2007.05.021 Jachuck, 2006, Process intensification: oxidation of benzyl alcohol using a continuous isothermal reactor under microwave irradiation, Green Chem., 8, 29, 10.1039/B512732G Gogate, 2004, Sonophotocatalytic reactors for wastewater treatment: a critical review, AIChE J., 50, 1051, 10.1002/aic.10079 Van Gerven, 2007, A review of intensification of photocatalytic processes, Chem. Eng. Process., 46, 781, 10.1016/j.cep.2007.05.012 Horst, 1999, Activated solid–fluid reactions in ultrasound reactors, Chem. Eng. Sci., 54, 2849, 10.1016/S0009-2509(98)00316-9 Keil, 1999, Reactors for sonochemical engineering—present status, Rev. Chem. Eng., 15, 85, 10.1515/REVCE.1999.15.2.85 Gogate, 2005, Assessment of hydrodynamic cavitation as a technology for the future, Ultrason. Sonochem., 12, 21, 10.1016/j.ultsonch.2004.03.007 Kumar, 2007, Conceptual design of a novel hydrodynamic cavitation reactor, Chem. Eng. Sci., 62, 2698, 10.1016/j.ces.2007.02.010 Rao, 2004, Process intensification in rotating packed beds (HIGEE): an appraisal, Ind. Eng. Chem. Res., 43, 1150, 10.1021/ie030630k Akay, 2005, Process intensification in water-in-crude oil emulsion separation by simultaneous application of electric field and novel demulsifier adsorbers based on polyhipe polymers, ACS Sym. Ser., 914, 378, 10.1021/bk-2005-0914.ch023 Hume, 2003, Trajectories of charged drops in a liquid–liquid system, Chem. Eng. J., 95, 171, 10.1016/S1385-8947(03)00101-3 Iliuta, 2003, Theory of trickle-bed magnetohydrodynamics under magnetic-field gradients, AIChE J., 49, 1525, 10.1002/aic.690490616 Munteanu, 2005, Process intensification in artificial gravity, Ind. Eng. Chem. Res., 44, 9384, 10.1021/ie050195p Charpentier, 2005, Process intensification by miniaturization, Chem. Eng. Technol., 28, 255, 10.1002/ceat.200407026 Jensen, 2001, Microreaction engineering—is small better?, Chem. Eng. Sci., 56, 293, 10.1016/S0009-2509(00)00230-X Mills, 2007, Microreactor technology and process miniaturization for catalytic reactions—a perspective on recent developments and emerging technologies, Chem. Eng. Sci., 62, 6992, 10.1016/j.ces.2007.09.021 Commenge, 2005, Analysis of microstructured reactor characteristics for process miniaturization and intensification, Chem. Eng. Technol., 28, 446, 10.1002/ceat.200500017 Kiwi-Minsker, 2005, Microstructured reactors for catalytic reactions, Catal. Today, 110, 2, 10.1016/j.cattod.2005.09.011 Klemm, 2007, Microstructured reactors in heterogeneous catalysis, Chem. Eng. Technol., 30, 1615, 10.1002/ceat.200700311 Wörz, 2001, Microreactors, a new efficient tool for optimum reactor design, Chem. Eng. Sci., 56, 1029, 10.1016/S0009-2509(00)00318-3 Alm, 2008, Testing and simulation of ceramic micro heat exchangers, Chem. Eng. J., 135S, S179, 10.1016/j.cej.2007.07.005 Henning, 2004, Characterisation of electrically powered micro-heat exchangers, Chem. Eng. J., 101, 339, 10.1016/j.cej.2003.10.020 Hessel, 2005, Micromixers—a review on passive and active mixing principles, Chem. Eng. Sci., 60, 2479, 10.1016/j.ces.2004.11.033 Ottino, 2004, Applied physics—designing optimal micromixers, Science, 305, 485, 10.1126/science.1099343 Ookawara, 2007, Applicability of a miniaturized micro-separator/classifier to oil–water separation, Chem. Eng. Technol., 30, 316, 10.1002/ceat.200600335 Wan, 2001, Design and fabrication of zeolite-based microreactors and membrane microseparators, Micropor. Mesopor. Mater., 42, 157, 10.1016/S1387-1811(00)00332-2 Antonietti, 2002, Polyreactions in miniemulsions, Prog. Polym. Sci., 27, 689, 10.1016/S0079-6700(01)00051-X Porras, 2005, Ceramic particles obtained using W/O nano-emulsions as reaction media, Colloid Surface A, 270, 189, 10.1016/j.colsurfa.2005.06.018 Kreutzer, 2006, Shouldn’t catalysts shape up? Structured reactors in general and gas–liquid monolith reactors in particular, Catal. Today, 111, 111, 10.1016/j.cattod.2005.10.014 Cybulski, 1994, Monoliths in heterogeneous catalysis, Catal. Rev., 36, 179, 10.1080/01614949408013925 Kapteijn, 2001, New non-traditional multiphase catalytic reactors based on monolithic structures, Catal. Today, 66, 133, 10.1016/S0920-5861(00)00614-3 Roy, 2004, Monoliths as multiphase reactors: a review, AIChE J., 50, 2918, 10.1002/aic.10268 Calis, 2001, CFD modelling and experimental validation of pressure drop and flow profile in a novel structured catalytic reactor packing, Chem. Eng. Sci., 56, 1713, 10.1016/S0009-2509(00)00400-0 Romkes, 2003, CFD modelling and experimental validation of particle-to-fluid mass and heat transfer in a packed bed at very low channel to particle diameter ratio, Chem. Eng. J., 96, 3, 10.1016/j.cej.2003.08.026 de Campos, 2001, Structured catalysts for partial oxidations, Catal. Today, 69, 121, 10.1016/S0920-5861(01)00362-5 Ellenberger, 1999, Counter-current operation of structured catalytically packed distillation columns: pressure drop, holdup and mixing, Chem. Eng. Sci., 54, 1339, 10.1016/S0009-2509(99)00055-X Giani, 2005, Mass-transfer characterization of metallic foams as supports for structured catalysts, Ind. Eng. Chem. Res., 44, 4993, 10.1021/ie0490886 Patcas, 2007, CO oxidation over structured carriers: a comparison of ceramic foams, honeycombs and beads, Chem. Eng. Sci., 62, 3984, 10.1016/j.ces.2007.04.039 Scheffler, 2005, Zeolite covered polymer derived ceramic foams: novel hierarchical pore systems for sorption and catalysis, Adv. Appl. Ceram., 104, 43, 10.1179/174367605225011016 Chinthaginjala, 2007, Preparation and application of carbon-nanofiber based microstructured materials as catalyst supports, Ind. Eng. Chem. Res., 46, 3968, 10.1021/ie061394r Tribolet, 2005, Palladium on carbon nanofibers grown on metallic filters as novel structured catalyst, Catal. Today, 105, 337, 10.1016/j.cattod.2005.06.035 Harmsen, 2007, Reactive distillation: the front-runner of industrial process intensification—a full review of commercial applications, research, scale-up, design and operation, Chem. Eng. Process., 46, 774, 10.1016/j.cep.2007.06.005 2003 Günther, 2004, Transport and reaction in microscale segmented gas–liquid flow, Lab Chip, 4, 278, 10.1039/B403982C Kashid, 2007, Hydrodynamics of liquid–liquid slug flow capillary microreactor: flow regimes, slug size and pressure drop, Chem. Eng. J., 131, 1, 10.1016/j.cej.2006.11.020 Kreutzer, 2005, Multiphase monolith reactors: chemical reaction engineering of segmented flow in microchannels, Chem. Eng. Sci., 60, 5895, 10.1016/j.ces.2005.03.022 Agrawal, 2001, Modelling of a coiled tubular chemical reactor, Chem. Eng. J., 84, 437, 10.1016/S1385-8947(00)00370-3 Sawyers, 1996, Effect of chaotic interfacial stretching on bimolecular chemical reaction in helical-coil reactors, Chem. Eng. J., 64, 129 Saxena, 1984, Coiled configuration for flow inversion and its effect on residence time distribution, AIChE J., 30, 363, 10.1002/aic.690300303 Krishna, 2002, Reactive separations: more ways to skin a cat, Chem. Eng. Sci., 57, 1491, 10.1016/S0009-2509(02)00020-9 Stankiewicz, 2003, Reactive separations for process intensification: an industrial perspective, Chem. Eng. Process., 42, 137, 10.1016/S0255-2701(02)00084-3 2005 Gorak, 2001, Catalytic distillation in structured packings: methyl acetate synthesis, AIChE J., 47, 1067, 10.1002/aic.690470513 Schoenmakers, 2003, Reactive and catalytic distillation from an industrial perspective, Chem. Eng. Process., 42, 145, 10.1016/S0255-2701(02)00085-5 Sundmacher, 1996, Development of a new catalytic distillation process for fuel ethers via a detailed nonequilibrium model, Chem. Eng. Sci., 51, 2359, 10.1016/0009-2509(96)00092-9 Huang, 2004, Residue curve maps of reactive membrane separation, Chem. Eng. Sci., 59, 2863, 10.1016/j.ces.2004.04.018 Qi, 2004, The impact of interfacial mass transfer on the feasible products of countercurrent reactive separation processes, Sep. Purif. Technol., 34, 201, 10.1016/S1383-5866(03)00193-X Bart, 2005, Prozessintensivierung durch reaktive Carrier bei Reaktivextraktion und -sorption, Chem. Ing. Tech., 77, 1773, 10.1002/cite.200500115 Wasewar, 2003, Intensification of enzymatic conversion of glucose to lactic acid by reactive extraction, Chem. Eng. Sci., 58, 3385, 10.1016/S0009-2509(03)00221-5 Falk, 1999, Comparison between a fixed-bed reactor and a chromatographic reactor, Chem. Eng. Sci., 54, 1479, 10.1016/S0009-2509(99)00057-3 Mazzotti, 1997, Dynamics of a chromatographic reactor: esterification catalyzed by acidic resins, Ind. Eng. Chem. Res., 36, 3163, 10.1021/ie9606348 Kelkar, 1999, Design of reactive crystallization systems incorporating kinetics and mass-transfer effects, AIChE J., 45, 69, 10.1002/aic.690450107 Tsuge, 2002, Reactive crystallization behaviour of calcium phosphate with and without whey protein addition, Chem. Eng. Res. Des., 80, 105, 10.1205/026387602753393277 Elsner, 2002, Adsorptive reactors for enhancing equilibrium gas-phase reactions—two case studies, Chem. Eng. Sci., 57, 1607, 10.1016/S0009-2509(02)00037-4 Sheikh, 1998, Analytical basis for separation enhanced reaction in continuous flow processes, Chem. Eng. Sci., 53, 2933, 10.1016/S0009-2509(98)00113-4 Xiu, 2003, New generalized strategy for improving sorption-enhanced reaction process, Chem. Eng. Sci., 58, 3425, 10.1016/S0009-2509(03)00200-8 Coronas, 1999, Catalytic reactors based on porous ceramic membranes, Catal. Today, 51, 377, 10.1016/S0920-5861(99)00090-5 Dittmeyer, 2001, Membrane reactors for hydrogenation and dehydrogenation processes based on supported palladium, J. Mol. Catal. A: Chem., 173, 135, 10.1016/S1381-1169(01)00149-2 Klose, 2003, Concentration and residence time effects in packed bed membrane reactors, Catal. Today, 82, 25, 10.1016/S0920-5861(03)00199-8 Tsotsis, 1992, Packed-bed catalytic membrane reactors, Chem. Eng. Sci., 47, 2903, 10.1016/0009-2509(92)87149-K Fino, 2005, Multifunctional filter for treatment of the flue gases from municipal waste incinerators, Ind. Eng. Chem. Res., 44, 9542, 10.1021/ie050251m Hoffmann, 1994, Reduction of diesel particulate-emissions by catalytic filtration, Chem. Eng. Technol., 17, 149, 10.1002/ceat.270170303 Bade, 1996, Development of a new reactor for combined comminution and chemical reaction, Chem. Eng. Commun., 143, 169, 10.1080/00986449608936440 Kaupp, 2002, Reactive milling with the Simoloyer®: environmentally benign quantitative reactions without solvents and wastes, Chem. Eng. Sci., 57, 763, 10.1016/S0009-2509(01)00430-4 Ganzeveld, 1993, Twin-screw extruders as polymerization reactors for a free-radical homopolymerization, Can. J. Chem. Eng., 71, 411, 10.1002/cjce.5450710310 Moad, 1999, The synthesis of polyolefin graft copolymers by reactive extrusion, Prog. Polym. Sci., 24, 81, 10.1016/S0079-6700(98)00017-3 Aguiar, 2002, Modelling of an indirect internal reforming solid oxide fuel cell, Chem. Eng. Sci., 57, 1665, 10.1016/S0009-2509(02)00058-1 Heidebrecht, 2005, Conceptual design of the integration of the reforming process in high temperature fuel cells, J. Power Sources, 145, 40, 10.1016/j.jpowsour.2004.12.037 Kolios, 2000, Autothermal fixed-bed reactor concepts, Chem. Eng. Sci., 55, 5945, 10.1016/S0009-2509(00)00183-4 Friedle, 1999, A counter-current heat-exchange reactor for high temperature partial oxidation reactions, Chem. Eng. Sci., 54, 1325, 10.1016/S0009-2509(99)00061-5 Grünewald, 2004, Intensification of regenerative heat exchange in chemical reactors using desorptive cooling, Ind. Eng. Chem. Res., 43, 4773, 10.1021/ie034126r Franke, 2004, Design and optimization of hybrid separation processes, Chem. Ing. Tech., 76, 199, 10.1002/cite.200406150 Lucia, 2006, Energy efficient hybrid separation processes, Ind. Eng. Chem. Res., 45, 8319, 10.1021/ie060035t Lei, 2003, Extractive distillation: a review, Sep. Purif. Rev., 32, 121, 10.1081/SPM-120026627 Lelkes, 1998, Feasibility of extractive distillation in a batch rectifier, AIChE J., 44, 810, 10.1002/aic.690440406 Charcosset, 1998, Purification of proteins by membrane chromatography, J. Chem. Technol. Biot., 71, 95, 10.1002/(SICI)1097-4660(199802)71:2<95::AID-JCTB823>3.0.CO;2-J Feng, 1998, Integrated membrane/adsorption process for gas separation, Chem. Eng. Sci., 53, 1689, 10.1016/S0009-2509(97)00440-5 Curcio, 2005, Membrane distillation and related operations—a review, Sep. Purif. Rev., 34, 35, 10.1081/SPM-200054951 Lawson, 1997, Membrane distillation, J. Membr. Sci., 124, 1, 10.1016/S0376-7388(96)00236-0 Berry, 1997, Synthesis of crystallization–distillation hybrid separation processes, AIChE J., 43, 1751, 10.1002/aic.690430712 Ghosh, 1993, Hybrid adsorption distillation process for separating propane and propylene, Ind. Eng. Chem. Res., 32, 2390, 10.1021/ie00022a024 Kumar, 1992, Novel adsorption distillation hybrid scheme for propane propylene separation, Sep. Sci. Technol., 27, 2157, 10.1080/01496399208019472 Draxler, 1986, Emulsion liquid membranes. 1. Phenomenon and industrial application, Chem. Eng. Process., 20, 319, 10.1016/0255-2701(86)80010-1 Sastre, 1998, Improved techniques in liquid membrane separations: an overview, Separ. Purif. Method, 27, 213, 10.1080/03602549809351641 Matros, 1996, Forced unsteady-state processes in heterogeneous catalytic reactors, Can. J. Chem. Eng., 74, 566, 10.1002/cjce.5450740504 Khinast, 1998, Complex dynamic features of a cooled reverse-flow reactor, AIChE J., 44, 1128, 10.1002/aic.690440511 Matros, 1996, Reverse-flow operation in fixed bed catalytic reactors, Catal. Rev., 38, 1, 10.1080/01614949608006453 Nieken, 1995, Limiting cases and approximate solutions for fixed-bed reactors with periodic flow reversal, AIChE J., 41, 1915, 10.1002/aic.690410809 Rehacek, 1992, Modeling of a tubular catalytic reactor with flow reversal, Chem. Eng. Sci., 47, 2897, 10.1016/0009-2509(92)87148-J van de Beld, 1994, Air purification by catalytic oxidation in a reactor with periodic flow reversal, Chem. Eng. Technol., 17, 217, 10.1002/ceat.270170402 Lauschke, 1994, Circulating reaction zones in a packed-bed loop reactor, Chem. Eng. Sci., 49, 5359, 10.1016/0009-2509(94)00291-6 Mangold, 1999, Coupled reaction zones in a circulation loop reactor, Chem. Eng. Sci., 54, 2597, 10.1016/S0009-2509(98)00448-5