Iron coatings from multicomponent methyl sulfate chloride electrolyte
Tóm tắt
Results of investigations of the influence of the conditions of electrolysis in methyl sulfate chloride (MSC) electrolytes on the hardness, structure, and chemical composition of doped iron coatings are presented. It is found that, by varying the electrodeposition mode, it is possible to obtain coatings with hardness of 4.5–7.2 GPa characterized by fibrous-columnar, granular, and layered structures with a carbon content up to 0.9%, nickel content up to 2–6%, and manganese content up to 2–4%.
Tài liệu tham khảo
Pleshka, E.D., Study and Development of Technology for Recovery of Motor-And-Tractor Pieces by Iron-Plating in Methyl Sulfate Chloride Electrolyte, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Chisinau: Agric. Inst., 1979.
Pleshka, E.D., Efficiency of Piece Recovery in the Electrolyte of Increased Stability, in Progressivnye sposoby vosstanovleniya iznoshennykh detalei mashin (Advanced Methods of Recovery of Worn-Out Machine Pieces), Chisinau: Agric. Inst., 1983.
Rekomendatsii po vypolneniyu tekhnologicheskogo protsessa vosstanovleniya detalei tipa “os’”, “val” elektricheskim zhelezneniem (Recommendations on Realization of Technological Process for Recovery of Pieces of the “Axis” and “Axle” Types by Electric Iron Plating), Moscow: GOSNITI, 1985.
Sidel’nikova, S.P., Study of the Process of Electrochemical Deposition of Iron from Methyl Sulfate Electrolytes, Extended Abstract of Cand. Sci. (Chem.) Dissertation, Chisinau, 1974.
Petrov, Yu.N. and Sidel’nikov, V.K., Study of Wear Resistance of Electrolytic Alloys of Iron and Phosphorus, Trudy Kishinevskogo SKhI (Proceedings of Chisinau Agric. Inst.), vol. 87, pp. 60–67.
Gol’dshtein, M.I., Litvinov, V.S., and Bronfin, B.M., Metallofizika vysokoprochnykh splavov (Physics of Metals of High-Strength Alloys), Moscow: Metallurgiya, 1986.
Rotinyan, A.L., Tikhonov, K.I., and Shoshina, I.A., Teoreticheskaya elektrokhimiya (Theoretical Electrochemistry), Leningrad: Khimiya, 1981.
Fiser, H., Elektrolitische Abscheidung und Elekrokristallisation von Metallen, Berlin: Springer, 1954.
Antropov, L.I., Teoreticheskaya elektrokhimiya (Theoretical Electrochemistry), Moscow: Vysshaya Shkola, 1984.
Skorchelleti, V.V., Teoreticheskaya elektrokhimiya (Theoretical Electrochemistry), Leningrad: Khimiya, 1970.
Kotik, F.I., Uskorennyi kontrol’ elektrolitov, rastvorov i rasplavov. Spravochnik (Accelerated Control of Electrolytes, Solutions, and Melts. Handbook), Moscow: Mashinostroenie, 1978.
Petrov, Yu.N. et al., To the Problem of Variation of Electrolytic Iron Potential Depending on Electrolysis Conditions, Trudy Kishinevskogo SKhI (Proceedings of Chisinau Agric. Inst.), 1869, vol. 54, pp. 11–14.
Gin’e, A. Rentgenografiya kristallov (X-Ray Diffraction of Crystals), Translation from French, Moscow: Gosizdat Fiz.-Mat. Liter., 1961.
Rachinger, W.A., A Correction for the α1 α2 Doublet in the Measurement of Widths of X-ray Diffraction Lines, J. Sci. Instrum., 1948, vol. 25, no. 7, pp. 254–255.
Gorelik, S.S. et al., Rentgenograficheskii i elektrograficheskii analiz (X-Ray and Electron Diffraction Analysis), Moscow: Metallurgiya, 1970.
Stepin, V.V., Kurbanova, V.I., and Fedorova, N.D., Analiz chernykh metallov i splavov (Analysis of Ferrous Metals and Alloys), Moscow: Mashinostroenie, 1980.
Antropov, L.I., Teoreticheskaya elektrokhimiya (Theoretical Electrochemistry), Moscow: Vysshaya Shkola, 1984.
Loshkarev, Yu.M., Cathodic Process in Electrolysis of Manganese Chloride Solutions, in Gidrometallurgiya khloridov (Hydrometallurgy of Chlorides), Kiev, 1964.
Loshkarev, Yu.M. and D’yachenko, T.F., Teoriya i praktika blestyashchikh pokrytii (Theory and Practice of Lustrous Coatings), Vilnyus, 1963.
Vagramyan, A.T. and Solov’eva, Z.A., Metody issledovaniya elektroosazhdeniya metallov (Methods of Study of Metal Electrodeposition), Moscow: Akad. Nauk SSSR, 1960.