Waste tire rubber in polymer blends: A review on the evolution, properties and future

Rodgers, 2011, Tire engineering, 619 Fukumori, 2002, Recycling technology of tire rubber, JSAE Rev, 23, 259, 10.1016/S0389-4304(02)00173-X Shulman, 2011, Tyre recycling, 297 Karger-Kocsis, 2013, Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers, J Mater Sci, 48, 1, 10.1007/s10853-012-6564-2 van Beukering, 2001, Trade and recycling of used tyres in Western and Eastern Europe, Resour Conserv Recycl, 33, 235, 10.1016/S0921-3449(01)00082-9 Sienkiewicz, 2012, Progress in used tyres management in the European Union: a review, Waste Manage, 32, 1742, 10.1016/j.wasman.2012.05.010 Fang, 2001, The status of recycling of waste rubber, Mater Des, 22, 123, 10.1016/S0261-3069(00)00052-2 Rajan, 2006, Science and technology of rubber reclamation with special attention to NR-based waste latex products, Prog Polym Sci, 31, 811, 10.1016/j.progpolymsci.2006.08.003 Akiba, 1997, Vulcanization and crosslinking in elastomers, Prog Polym Sci, 22, 475, 10.1016/S0079-6700(96)00015-9 Adhikari, 2000, Reclamation and recycling of waste rubber, Prog Polym Sci, 25, 909, 10.1016/S0079-6700(00)00020-4 Ferrão, 2008, A management system for end-of-life tyres: a Portuguese case study, Waste Manage, 28, 604, 10.1016/j.wasman.2007.02.033 Roche, 2011, Dynamic damping properties of thermoplastic elastomers based on EVA and recycled ground tire rubber, J Elastomers Plast, 43, 317, 10.1177/0095244311398631 Fiksel, 2011, Comparative life cycle assessment of beneficial applications for scrap tires, Clean Technol Environ Policy, 13, 19, 10.1007/s10098-010-0289-1 Jang, 1998, Discarded tire recycling practices in the United States, Japan and Korea, Resour Conserv Recycl, 22, 1, 10.1016/S0921-3449(97)00041-4 Yang, 1993, Recycling of discarded tires in Taiwan, Resour Conserv Recycl, 9, 191, 10.1016/0921-3449(93)90003-X EPA USEPA. In: Clark C, Meardon K, Russell D, editors. Scrap tire technology and markets. United States of America: William Andrew Publishing/Noyes; 1993. ETRMA. In: Association ETRM, editor. European Tyre & Rubber Manufacturers’ Association: The annual report and statistic 2012. Belgium; 2013. De, 2006, Reclaiming of ground rubber tire (GRT) by a novel reclaiming agent, Eur Polym J, 42, 917, 10.1016/j.eurpolymj.2005.10.003 Dubkov, 2012, Reclamation of waste tyre rubber with nitrous oxide, Polym Degrad Stab, 97, 1123, 10.1016/j.polymdegradstab.2012.04.006 Jana, 2005, Devulcanization of natural rubber vulcanizates by mechanochemical process, Polym – Plast Technol Eng, 44, 1399, 10.1080/03602550500209853 Hong, 2001, Plastic/rubber blends of ultrasonically devulcanized GRT with HDPE, J Elastomers Plast, 33, 47, 10.1106/5AMQ-XEAY-A05B-P1FY Ayrilmis, 2009, Utilization of waste tire rubber in manufacture of oriented strandboard, Waste Manage (New York, NY), 29, 2553, 10.1016/j.wasman.2009.05.017 Stefani, 2005, Thermogravimetric analysis of composites obtained from sintering of rice husk-scrap tire mixtures, J Therm Anal Calorim, 81, 315, 10.1007/s10973-005-0785-4 García, 2007, Composites based on sintering rice husk–waste tire rubber mixtures, Mater Des, 28, 2234, 10.1016/j.matdes.2006.06.001 Amari, 1999, Resource recovery from used rubber tires, Resour Policy, 25, 179, 10.1016/S0301-4207(99)00025-2 Sharma, 1998, Disposal of waste tyres for energy recovery and safe environment—review, Energy Convers Manage, 39, 511, 10.1016/S0196-8904(97)00044-7 Shah, 2007, Catalytic conversion of waste tyres into valuable hydrocarbons, J Polym Environ, 15, 207, 10.1007/s10924-007-0062-7 Mui, 2004, Production of active carbons from waste tyres––a review, Carbon, 42, 2789, 10.1016/j.carbon.2004.06.023 Wang, 2009, Review of waste tire reuse & recycling in China—current situation, problems and countermeasures, Adv Nat Sci, 2, 9 Sunthonpagasit, 2004, Scrap tires to crumb rubber: feasibility analysis for processing facilities, Resour Conserv Recycl, 40, 281, 10.1016/S0921-3449(03)00073-9 Ferrer, 1997, The economics of tire remanufacturing, Resour Conserv Recycl, 19, 221, 10.1016/S0921-3449(96)01181-0 Purcell, 1978, Tire recycling: research trends and needs, Conserv Recycl, 2, 137, 10.1016/0361-3658(78)90053-X Fan, 2011, A study on functionalization of waste tire rubber powder through ozonization, J Polym Environ, 19, 943, 10.1007/s10924-011-0352-y Sonnier, 2007, Polyethylene/ground tyre rubber blends: influence of particle morphology and oxidation on mechanical properties, Polym Testing, 26, 274, 10.1016/j.polymertesting.2006.10.011 Colom, 2009, Effect of the particle size and acid pretreatments on compatibility and properties of recycled HDPE plastic bottles filled with ground tyre powder, J Appl Polym Sci, 112, 1882, 10.1002/app.29611 Abdel-Bary, 1997, Radiation-induced graft copolymerization of some vinyl monomers onto waste rubber powder, Polym – Plast Technol Eng, 36, 241, 10.1080/03602559708000617 Zhang, 2012, Graft polymerization of styrene onto waste rubber powder and surface characterization of graft copolymer, Polym Bull, 68, 789, 10.1007/s00289-011-0586-9 Shanmugharaj, 2005, UV surface modification of waste tire powder: characterization and its influence on the properties of polypropylene/waste powder composites, Polym Testing, 24, 739, 10.1016/j.polymertesting.2005.04.006 Ratnam, 2013, Effect of pre-irradiation of waste tire dust on the properties of ethylene vinyl acetate/waste tire dust blend (EVA/WTD) blends, J Compos Biodegr Polym, 1, 16, 10.12974/2311-8717.2013.01.01.3 Tao, 2013, The effect of devulcanization level on mechanical properties of reclaimed rubber by thermal-mechanical shearing devulcanization, J Appl Polym Sci, 129, 2598, 10.1002/app.38976 Myhre, 2012, Rubber recycling: chemistry, processing, and applications, Rubber Chem Technol, 85, 408, 10.5254/rct.12.87973 Li, 2005, Effect of ground rubber powder and devulcanizates on the properties of natural rubber compounds, J Appl Polym Sci, 97, 208, 10.1002/app.21748 Rooj, 2011, New route for devulcanization of natural rubber and the properties of devulcanized rubber, J Polym Environ, 19, 382, 10.1007/s10924-011-0293-5 Shi, 2013, Structure and performance of reclaimed rubber obtained by different methods, J Appl Polym Sci, 129, 999, 10.1002/app.38727 Isayev, 2011, Recycling of rubbers, 663 Vukanti, 2009, Bacterial communities of tyre monofill sites: growth on tyre shreds and leachate, J Appl Microbiol, 106, 1957, 10.1111/j.1365-2672.2009.04157.x Shah, 2013, Biodegradation of natural and synthetic rubbers: a review, Int Biodeterior Biodegr, 83, 145, 10.1016/j.ibiod.2013.05.004 Ismail, 2006, Effect of waste tire dust (WTD) size on the mechanical and morphological properties of polypropylene/waste tire dust (PP/WTD) blends, Polym – Plast Technol Eng, 45, 463, 10.1080/03602550600553739 Sakinah, 2009, Effect of mixing conditions on the tensile properties of ethylene vinyl acetate/waste tire dust (EVA/WTD) blend, Polym – Plast Technol Eng, 48, 1139, 10.1080/03602550903147270 Mangaraj, 2005 Mészáros, 2012, EB-promoted recycling of waste tire rubber with polyolefins, Radiat Phys Chem, 81, 1357, 10.1016/j.radphyschem.2011.11.058 Qin, 2008, Blending LLDPE and ground rubber tires, Polym – Plast Technol Eng, 47, 199, 10.1080/03602550701816217 Zhang, 2009, Characterization of the properties of thermoplastic elastomers containing waste rubber tire powder, Waste Manage, 29, 1480, 10.1016/j.wasman.2008.10.004 Grigoryeva, 2008, Reactive compatibilization of recycled polyethylenes and scrap rubber in thermoplastic elastomer: chemical and radiation-chemical approach, Rubber Chem Technol, 81, 737, 10.5254/1.3548229 Zhang, 2010, Prediction of mechanical properties of polypropylene/waste ground rubber tire powder treated by bitumen composites via uniform design and artificial neural networks, Mater Des, 31, 1900, 10.1016/j.matdes.2009.10.057 Kim, 2000, Mechanical and dynamic mechanical properties of waste rubber powder/HDPE composite, J Appl Polym Sci, 77, 2595, 10.1002/1097-4628(20000919)77:12<2595::AID-APP60>3.0.CO;2-C Sonnier, 2008, Compatibilizing thermoplastic/ground tyre rubber powder blends: efficiency and limits, Polym Testing, 27, 901, 10.1016/j.polymertesting.2008.07.003 Tantayanon, 2004, Enhanced toughening of poly(propylene) with reclaimed-tire rubber, J Appl Polym Sci, 91, 510, 10.1002/app.13182 Awang, 2008, Preparation and characterization of polypropylene/waste tyre dust blends with addition of DCP and HVA-2 (PP/WTDP-HVA2), Polym Testing, 27, 321, 10.1016/j.polymertesting.2007.12.001 Awang, 2007, Polypropylene-based blends containing waste tire dust: effects of trans-polyoctylene rubber (TOR) and dynamic vulcanization, Polym Testing, 26, 779, 10.1016/j.polymertesting.2007.04.007 Punnarak, 2006, Dynamic vulcanization of reclaimed tire rubber and high density polyethylene blends, Polym Degrad Stab, 91, 3456, 10.1016/j.polymdegradstab.2006.01.012 Sreeja, 2000, Cure characteristics and mechanical properties of natural rubber/reclaimed rubber blends, Polym – Plast Technol Eng, 39, 501, 10.1081/PPT-100100043 Zhang, 2009, Properties of natural rubber vulcanizates containing mechanochemically devulcanized ground tire rubber, J Polym Res, 16, 411, 10.1007/s10965-008-9243-x Yehia, 2004, Mechano-chemical reclamation of waste rubber powder and its effect on the performance of NR and SBR vulcanizates, J Elastomers Plast, 36, 109, 10.1177/0095244304039896 Nelson, 2003, Studies on maleic anhydride grafted reclaimed rubber/acrylonitrile butadiene rubber blends, Progr Rubber Plast Recycl Technol, 43, 171, 10.1177/147776060301900303 Sreeja, 2002, Studies on acrylonitrile butadiene rubber/reclaimed rubber blends, J Elastomers Plast, 34, 145, 10.1106/009524402024278 Sreeja, 2003, Styrene butadiene rubber/reclaimed rubber blends, Int J Polym Mater Polym Biomater, 52, 599, 10.1080/00914030304902 Lamminmäki, 2006, Feasible incorporation of devulcanized rubber waste in virgin natural rubber, J Mater Sci, 41, 8301, 10.1007/s10853-006-1010-y Han, 2002, Fracture behavior of NR and SBR vulcanizates filled with ground rubber having uniform particle size, J Appl Polym Sci, 85, 2491, 10.1002/app.10575 De, 2000, Reclaiming of rubber by a renewable resource material (RRM). III. Evaluation of properties of NR reclaim, J Appl Polym Sci, 75, 1493, 10.1002/(SICI)1097-4628(20000321)75:12<1493::AID-APP8>3.0.CO;2-U Sombatsompop, 2003, Rheology, cure characteristics, physical and mechanical properties of tire tread reclaimed rubber/natural rubber compounds, J Appl Polym Sci, 87, 1723, 10.1002/app.11698 De, 2013, Reinforcing effect of reclaim rubber on natural rubber/polybutadiene rubber blends, Mater Des, 46, 142, 10.1016/j.matdes.2012.10.014 De, 2007, Reclaiming of ground rubber tire by a novel reclaiming agent. I. Virgin natural rubber/reclaimed GRT vulcanizates, Polym Eng Sci, 47, 1091, 10.1002/pen.20790 Balasubramanian, 2009, Cure modeling and mechanical properties of counter rotating twin screw extruder devulcanized ground rubber tire—natural rubber blends, J Polym Res, 16, 133, 10.1007/s10965-008-9211-5 Darestani Farahani, 2006, Mechanical and viscoelastic properties of natural rubber/reclaimed rubber blends, Polym Bull, 56, 495, 10.1007/s00289-006-0508-4 Nelson, 2004, Cure characteristics and mechanical properties of maleic anhydride grafted reclaimed rubber/styrene butadiene rubber blends, Polym – Plast Technol Eng, 43, 245, 10.1081/PPT-120027474 Rattanasom, 2005, Effect of curing system on the mechanical properties and heat aging resistance of natural rubber/tire tread reclaimed rubber blends, Polym Testing, 24, 728, 10.1016/j.polymertesting.2005.04.008 Li, 2012, Improvement of the properties of natural rubber/ground tire rubber composites through biological desulfurization of GTR, J Polym Res, 19, 1, 10.1007/s10965-012-9864-y Li, 2011, Microbial desulfurization of ground tire rubber by Thiobacillus ferrooxidans, Polym Degrad Stab, 96, 1662, 10.1016/j.polymdegradstab.2011.06.011 Li, 2012, Microbial desulfurization of ground tire rubber by Sphingomonas sp.: a novel technology for crumb rubber composites, J Polym Environ, 20, 372, 10.1007/s10924-011-0386-1 Hassan, 2007, Reinforced material from reclaimed rubber/natural rubber, using electron beam and thermal treatment, J Appl Polym Sci, 104, 2569, 10.1002/app.25297 Kumnuantip, 2003, Dynamic mechanical properties and swelling behaviour of NR/reclaimed rubber blends, Mater Lett, 57, 3167, 10.1016/S0167-577X(03)00019-3 Li, 2005, Improvement of mechanical properties of rubber compounds using waste rubber/virgin rubber, Polym Eng Sci, 45, 1239, 10.1002/pen.20402 Yasin, 2012, Effect of polyfunctional monomers on properties of radiation crosslinked EPDM/waste tire dust blend, Radiat Phys Chem, 81, 421, 10.1016/j.radphyschem.2011.12.008 Hassan, 2013, Effect of gamma irradiation on some properties of reclaimed rubber/nitrile–butadiene rubber blend and its swelling in motor and brake oils, J Elastomers Plast, 45, 77, 10.1177/0095244312445523 Li, 2003, Mechanical properties of high-density polyethylene/scrap rubber powder composites modified with ethylene–propylene–diene terpolymer, dicumyl peroxide, and silicone oil, J Appl Polym Sci, 88, 2020, 10.1002/app.11907 Lee, 2007, Dynamic reaction inside co-rotating twin screw extruder. II. Waste ground rubber tire powder/polypropylene blends, J Appl Polym Sci, 106, 3209, 10.1002/app.26490 Mujal-Rosas, 2011, Study on dielectric, thermal, and mechanical properties of the ethylene vinyl acetate reinforced with ground tire rubber, J Reinf Plast Compos, 30, 581, 10.1177/0731684411399135 Sonnier, 2006, Compatibilisation of polyethylene/ground tyre rubber blends by γ irradiation, Polym Degrad Stab, 91, 2375, 10.1016/j.polymdegradstab.2006.04.001 Lee, 2009, Dynamic reaction involving surface modified waste ground rubber tire powder/polypropylene, Polym Eng Sci, 49, 168, 10.1002/pen.21236 Awang, 2008, Processing and properties of polypropylene-latex modified waste tyre dust blends (PP/WTDML), Polym Testing, 27, 93, 10.1016/j.polymertesting.2007.09.008 Zhu, 2010, Effect of interfacial strengthening in blends of reclaimed rubber and polypropylene, J Appl Polym Sci, 118, 1051 Hassan, 2013, Mechanochemical devulcanization and gamma irradiation of devulcanized waste rubber/high density polyethylene thermoplastic elastomer, J Ind Eng Chem, 19, 1722, 10.1016/j.jiec.2013.02.012 Sakinah, 2011, Performance of irradiated and crosslinked ethylene vinyl acetate/waste tire dust blend, J Elastomers Plast Ramarad, 2015, Improving the properties of reclaimed waste tire rubber by blending with poly(ethylene-co-vinyl acetate) and electron beam irradiation, J Appl Polym Sci, 132 Al-Malaika, 1989, Thermoplastic elastomers: part III—ageing and mechanical properties of natural rubber-reclaimed rubber/polypropylene systems and their role as solid phase dispersants in polypropylene/polyethylene blends, Polym Degrad Stab, 26, 31, 10.1016/0141-3910(89)90026-8 Ratnam, 2014, Irradiation cross-linking of ethylene vinyl acetate/waste tire dust: effect of multifunctional acrylates, J Thermoplast Compos Mater, 10.1177/0892705713518814 Zhang, 2011, Preparation of thermoplastic vulcanizates based on waste crosslinked polyethylene and ground tire rubber through dynamic vulcanization, J Appl Polym Sci, 122, 2110, 10.1002/app.34293 Scaffaro, 2005, Formulation, characterization and optimization of the processing condition of blends of recycled polyethylene and ground tyre rubber: mechanical and rheological analysis, Polym Degrad Stab, 90, 281, 10.1016/j.polymdegradstab.2005.03.022 Nevatia, 2002, Thermoplastic elastomers from reclaimed rubber and waste plastics, J Appl Polym Sci, 83, 2035, 10.1002/app.10115 Xin, 2009, Expanded waste ground rubber tire powder/polypropylene composites: processing-structure relationships, J Compos Mater, 10.1177/0021998309345346 Xin, 2009, Microcellular structure of PP/waste rubber powder blends with supercritical CO2 by foam extrusion process, J Cell Plast, 45, 499, 10.1177/0021955X09342937 Zhang, 2008, Preparation and characterization of polypropylene/waste ground rubber tire powder microcellular composites by supercritical carbon dioxide, Macromol Res, 16, 404, 10.1007/BF03218537 Zhu, 2011, Enhancement of processability and foamability of ground tire rubber powder and LDPE blends through solid state shear milling, J Polym Res, 18, 533, 10.1007/s10965-010-9446-9 Sulcis, 2014, Novel HDPE/ground tyre rubber composite materials obtained through in-situ polymerization and polymerization filling technique, J Appl Polym Sci, 10.1002/app.40313 Naskar, 2001, Thermoplastic elastomeric composition based on ground rubber tire, Polym Eng Sci, 41, 1087, 10.1002/pen.10809 Naskar, 2002, Thermoplastic elastomeric composition based on maleic anhydride-grafted ground rubber tire, J Appl Polym Sci, 84, 370, 10.1002/app.10348 Cañavate, 2011, Formulations for thermoplastic vulcanizates based on high density polyethylene, ethylene–propylene–diene monomer, and ground tyre rubber, J Compos Mater, 45, 1189, 10.1177/0021998310369596 Céspedes, 2014, Thermoplastic elastomers based on high-density polyethylene, ethylene–propylene–diene terpolymer, and ground tire rubber dynamically vulcanized with dicumyl peroxide, J Appl Polym Sci, 131, 10.1002/app.39901 Abou Zeid, 2008, Effect of gamma irradiation on ethylene propylene diene terpolymer rubber composites, Nucl Instrum Methods Phys Res, Sect B, 266, 111, 10.1016/j.nimb.2007.10.037 Zeid, 2008, Effect of gamma and UV radiation on properties of EPDM/GTR/HDPE blends, Polym – Plast Technol Eng, 47, 567, 10.1080/03602550801949496 da Costa, 2006, Analysis of thermal properties and impact strength of PP/SRT, PP/EPDM and PP/SRT/EPDM mixtures in single screw extruder, Polym Testing, 25, 498, 10.1016/j.polymertesting.2006.02.003 da Costa, 2008, Analysis of thermal properties and rheological behavior of LLDPE/EPDM and LLDPE/EPDM/SRT mixtures, Polym Testing, 27, 27, 10.1016/j.polymertesting.2007.08.001 da Costa, 2010, Analysis and optimization of polypropylene (PP)/ethylene–propylene–diene monomer (EPDM)/scrap rubber tire (SRT) mixtures using RSM methodology, Polym Testing, 29, 572, 10.1016/j.polymertesting.2010.04.003 Lima, 2013, Partial replacement of EPDM by GTR in thermoplastic elastomers based on PP/EPDM: effects on morphology and mechanical properties, J Appl Polym Sci Lu, 2014, Waste ground rubber tire powder/thermoplastic vulcanizate blends: preparation, characterization, and compatibility, J Appl Polym Sci, 131, 10.1002/app.39868 Li, 2003, Structure and mechanical properties of SRP/HDPE/POE (EPR or EPDM) composites, Polym Testing, 22, 859, 10.1016/S0142-9418(03)00022-9 Magioli, 2010, The effect of dynamic vulcanization on the mechanical, dynamic mechanical and fatigue properties of TPV based on polypropylene and ground tire rubber, Polym Testing, 29, 840, 10.1016/j.polymertesting.2010.07.008 Rezaei Abadchi, 2010, Partial replacement of NR by GTR in thermoplastic elastomer based on LLDPE/NR through using reactive blending: its effects on morphology, rheological, and mechanical properties, J Appl Polym Sci, 115, 2416, 10.1002/app.31356 Sombatsompop, 2006, Comparison of physical and mechanical properties of NR/carbon black/reclaimed rubber blends vulcanized by conventional thermal and microwave irradiation methods, J Appl Polym Sci, 10, 5039, 10.1002/app.23472 Maridass, 2006, Effect of carbon black on devulcanized ground rubber tire—natural rubber vulcanizates: cure characteristics and mechanical properties, J Elastomers Plast, 38, 211, 10.1177/0095244306063480 Zainal, 2011, The effects of short glass fibre (SGF) loading and a silane coupling agent on properties of polypropylene/waste tyre dust/short glass fibre (PP/WTD/SGF) composites, Polym – Plast Technol Eng, 50, 297, 10.1080/03602559.2010.531868 Hassan, 2010, Influence of talc content on some properties of gamma irradiated composites of polyethylene and recycled rubber wastes, J Appl Polym Sci, 117, 2428, 10.1002/app.32120 Ramezani Kakroodi, 2013, Reinforcement of maleated polyethylene/ground tire rubber thermoplastic elastomers using talc and wood flour, J Appl Polym Sci De, 2013, Reinforcing effect of nanosilica on the properties of natural rubber/reclaimed ground rubber tire vulcanizates, Polym Eng Sci, 53, 227, 10.1002/pen.23255 Razmjooei, 2012, Preparation of dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/reclaimed rubber, J Appl Polym Sci, 124, 4864 Sreeja, 2003, Cure characteristics and mechanical properties of short nylon fiber reinforced natural rubber-reclaimed rubber blends, Polym – Plast Technol Eng, 42, 239, 10.1081/PPT-120017926 Sreeja, 2003, Cure characteristics and mechanical properties of short nylon fiber reinforced acrylonitrile butadiene rubber/reclaimed rubber blends, Int J Polym Mater Polym Biomater, 52, 175, 10.1080/00914030304895 Sreeja, 2002, Effect of urethane based bonding agent on the cure characteristics and mechanical properties of natural rubber/whole tyre reclaim–short nylon fiber composite, Polym – Plast Technol Eng, 41, 77, 10.1081/PPT-120002061 Sreeja, 2001, Acrylonitrile–butadiene rubber/reclaimed rubber—nylon fiber composite, Adv Polym Technol, 20, 281, 10.1002/adv.10001