Assessment of API X65 steel pipe puffiness by a strain based design (SBD) approach under bi-axial loading

Höhler, 2013, Resistance of HFI line pipe to external loads Hilgert, 2018, Anisotropy – benefits for UOE line pipe Hart, 2018, Evaluation of anisotropic pipe steel stress-strain relationships influence on strain demand Zheng, 2018, Research and Development of X70 Large Diameter UOE Linepipe with High Deformability for Strain-Based Design Pipeline Berns, 2010 Brauer, 2013, Influence of strain aging on parameters for assessment of multi-axial load histories of HighFrequency-Iinduction (HFI) welded line pipe Héctor, 2018, Deformation of steel pipes with internal pressure under axial compression and bending load under seismic action Lower, 2014 Canadian Standard Association (CSA), 2015 Dorey, 2006, Critical buckling strain equations for energy pipelines—a parametric study, J. Offshore Mech. Arct. Eng., 128, 248, 10.1115/1.2199561 Liu, 2013 American Petroleum Institute (API), 1991 Det Norske Veritas (DNV), 2010 Pluvinage, 2003, vol. 1, 210 Hadj Meliani, 2009, Constraint parameter for a longitudinal surface notch in a pipe submitted to internal pressure, Key Eng. Mater., 399, 3, 10.4028/www.scientific.net/KEM.399.3 Hadj Meliani, 2015, A two-parameter approach to assessing notch fracture behaviour in clay/epoxy nanocomposites, Compos. Part B, 80, 126, 10.1016/j.compositesb.2015.05.034 Elazzizi, 2015, The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement, Int. J. Hydrog. Energy, 40, 2295, 10.1016/j.ijhydene.2014.12.040 Xue, 2007 API 579-1/ASME FFS-1 2007, 2007 CSA Z662-15, 2018, Construction Requirements Course DNV-0S-F101, 2000, Offshore standard API 1111, 1999 Murray, 1992, Local buckling of thin-walled pipes being bent in the plastic range, Thin-Walled Struct., 14, 411, 10.1016/0263-8231(92)90011-K