Analytical study on shear strength of macro synthetic fiber reinforced concrete beams

Fantilli, 2015, Fiber-reinforced lightweight concrete slabs for the maintenance of the Soleri Viaduct, Eng Struct, 99, 184, 10.1016/j.engstruct.2015.04.045 Parra-Montesinos, 2006, Shear strength of beams with deformed steel fibers, Concr Int, 28, 57 Sahoo, 2015, Monotonic behavior of large-scale SFRC beams without stirrups, Eng Struct, 92, 46, 10.1016/j.engstruct.2015.03.014 Campione, 2008, Fibrous reinforced concrete beams in flexure: experimental investigation, analytical modelling and design considerations, Eng Struct, 30, 2970, 10.1016/j.engstruct.2008.04.019 Lim, 1999, Experimental and theoretical investigation on the shear of steel fibre reinforced concrete beams, Eng Struct, 21, 937, 10.1016/S0141-0296(98)00049-2 Chalioris, 2013, Steel fibrous RC beams subjected to cyclic deformations under predominant shear, Eng Struct, 49, 104, 10.1016/j.engstruct.2012.10.010 Batson GB, Kim J. Steel fibers for shear reinforcement in reinforced concrete beams. In: Ahmad S, Prisco Md, Meyer C, Plizzari GA, Shah S, editors. Fiber reinforced concrete from theory to practice. Bergamo, Italy; 2004. p. 181–92. Swamy, 1985, Effectiveness of steel fibers as shear reinforcement, Concr Int, 7, 35 Li, 1992, Steel and synthetic fibers as shear reinforcement, ACI Mater J, 89, 499 Majdzadeh, 2006, Shear strength of reinforced concrete beams with a fiber concrete matrix, Can J Civ Eng, 33, 726, 10.1139/l05-118 Roesler, 2004, Fracture of plain and fiber-reinforced concrete slabs under monotonic loading, J Mater Civ Eng, 16, 452, 10.1061/(ASCE)0899-1561(2004)16:5(452) Roesler, 2006, Effect of synthetic fibers on structural behavior of concrete slabs-on-ground, ACI Mater J, 103, 3 Building code requirements for structural concrete (ACI 318-14) and commentary. Farmington Hills, MI: American Concrete Institute; 2014. Noghabai, 2000, Beams of fibrous concrete in shear and bending: experiment and model, J Struct Eng, 126, 243, 10.1061/(ASCE)0733-9445(2000)126:2(243) Majdzadeh, 2006, Shear strength of reinforced concrete beams with a fiber concrete matrix Canadian, J Civ Eng, 33, 726 Mirsayah, 2002, Shear strength of steel fiber reinforced concrete, ACI Mater J, 99, 473 Altoubat, 2009, Shear behavior of macro-synthetic fiber-reinforced concrete beams without stirrups, ACI Mater J, 106, 381 Narayanan, 1984, Effect of fiber addition on concrete strength, Indian Concr J, 58, 100 Swamy, 1993, Influence of steel fibers on the shear resistance of lightweight concrete I-beams, ACI Struct J, 90, 103 Khuntia, 1999, Shear strength of normal and high-strength fiber reinforced concrete beams without stirrups, ACI Struct J, 96 Mansur, 1986, Shear strength of fibrous concrete beams without stirrups, J Struct Eng, 121, 2066, 10.1061/(ASCE)0733-9445(1986)112:9(2066) Narayanan, 1987, Use of steel fibers as shear reinforcement, ACI Struct J, 84, 216 Ashour, 1992, Behaviour of high-strength fiber reinforced concrete beams, ACI Struct J, 89, 176 Imam, 1995, Shear-moment analysis of reinforced high strength concrete beams containing steel fibers, Can J Civ Eng, 22, 462, 10.1139/l95-054 Sharma, 1986, Shear strength of steel fiber reinforced concrete beams, ACI J, Proc, 83, 624 Li, 1992, Steel and synthetic fibers as shear reinforcement, ACI Mater J, 89, 499 Dupont, 2003, Shear capacity of concrete beams containing longitudinal reinforcement and steel fibers, ACI Special Publ, 216, 79 CEB-FIP Model Code 2010. Final draft; Model Code prepared by the Special Activity Group 5.Lausanne; September 2011. Kwak, 2002, Shear strength of steel fiber reinforced concrete beams without stirrups, ACI Struct J, 99, 530 Rilem, 2003, 162-TDF; Test and design methods for steel fibre reinforced concrete, σ-ε-design method. (Chairlady L. Vandewalle), Mater Struct, 36, 560, 10.1617/14007 Rosenbusch J. Subtask 4.2, Brite Euram Project, Contract Nr. BRPR-CT98-0813. Final Report; 2002. BS EN 14889-2:2006. Fibres for concrete. Polymer fibres. Definitions, specifications and conformity. British Standards Institution; 2006. Singh, 2004, Pullout behavior of polypropylene fibers from cementitious matrix, Cem Concr Res, 34, 1919, 10.1016/j.cemconres.2004.02.014 ASTM C39. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA, USA: ASTM International; 2007. ASTM C78 / C78M-15a. Standard test method for flexural strength of concrete (using simple beam with third-point loading). West Conshohocken, PA, USA: ASTM International; 2015. JSCE-SF4. Methods of tests for flexural strength and flexural toughness of steel fiber reinforced concrete. Japan Society of Civil Engineers JSCE-SF4; 1984. p. 58–61. ASTM C 1609-07. Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading). West Conshohocken, PA: ASTM International; 2007. BS EN 14651:2005. Test method for metallic fibre concrete. Measuring the flexural tensile strength (limit of proportionality (LOP), residual). British Standards Institution; 2005. Wight, 2012 JSCE-SF6. Method of test for shear strength of steel fiber reinforced concrete (SFRC). Tokyo: Japan Society of Civil Engineers; 1990. p. 67–9. Lafraugh RW, Moustafa SE. Experimental investigation of the use of steel fibers for shear reinforcement. Technical Report, Concrete Technology Associates, Tacoma, Wash; 1975. Lim, 1987, Shear and moment capacity of reinforced steel-fiber concrete beams, Mag Concr Res, 39, 148, 10.1680/macr.1987.39.140.148 Naaman AE. High performance fiber reinforced cement composites. IABSE symposium on concrete structures for the future. Paris, France; 1987. p. 371–6. Vandewalle, 2000, Recommendations of Rilem TC162-TDF: test and design methods for steel fiber reinforced concrete: σ–ε design method, Mater Struct, 33, 75 NBN-B15-238. Proeven op staalvezelbeton – buigproef of prismatische proefstukken. Belgian Standard; 1992. Kobayashi, 1983, Development of fiber reinforced concrete in Japan, Int J Cem Compos Light Weight Concr, 5, 27, 10.1016/0262-5075(83)90046-5