Numerical simulation of response of plane plates subjected to uniform primary shock loading of non-contact underwater explosion

Cole, 1948 Keil, 1956 Keil, 1961, The response of ships to underwater explosions, Trans Soc Naval Archit Mar Eng, 69, 366 Taylor, 1941, The pressure and impulse of submarine explosion waves on plates, Comp Underwater Explos Res, ONR, 1, 1155 Temperley, 1950, Theoretical investigation of cavitation phenomena occurring when an underwater pressure pulse is incident on a yielding surface, Underwater Explos Res, ONR, 3, 260 Kennard, 1944, The effect of pressure wave on a plate or diaphragm, Comp Underwater Explos Res, ONR, 3, 11 Haung, 1986, Numerical analysis of interaction of pressure pulses with submerged structures Ezra, 1973, Principles and practice of explosive metal working, vol. 1 Rajendran, 2001, Linear elastic shock response of plane plates subjected to underwater explosion, Int J Impact Eng, 25, 493, 10.1016/S0734-743X(00)00056-7 Hung, 2005, Elastic shock response of of an air-backed plate to underwater explosion, Int J Impact Eng, 31, 151, 10.1016/j.ijimpeng.2003.10.039 Rajendran, 2000, Underwater shock response of circular HSLA steel plates, Shock Vib, 7, 251, 10.1155/2000/697520 Johnson, 1966, An investigation into the explosive deep drawing of circular blanks using plug cushion technique, Int J Mech Sci, 6, 287, 10.1016/0020-7403(64)90033-5 Minshall, 1955, Properties of elastic and plastic waves determined by pin contactors and crystals, J Appl Phys, 26, 463, 10.1063/1.1722019 Williams, 1962, Some metallurgical aspects of metal forming, Sheet Metal Ind, 29, 391 Bednarsky, 1969, The dynamic deformation of a circular membrane, Int J Mech Sci, 11, 949, 10.1016/0020-7403(69)90007-1 Hudson, 1951, Time displacement studies on diaphragm by explosive loading, Comp Underwater Explos Res, ONR, 3, 445 Remmerswaal, 1962, The peaceful use of explosives, Sheet Metal Ind, 475 Finnie, 1962, Explosive forming of circular diaphragms, Sheet Metal Ind, 391 Hudson, 1951, Theory of dynamic plastic deformation of a thin diaphragm, Comp Underwater Explos Res, ONR, 3, 164 Fye, 1951, Diaphragm gauge studies of underwater explosion, Comp Underwater Explos Research, ONR, 3, 517 Jiang, 1995, Non-linear transient analysis of submerged circular plates subjected to underwater explosions, Comput Meth Appl Mech Eng, 134, 163, 10.1016/0045-7825(96)01031-6 Rajendran, 2001, Performance evaluation of HSLA steel subjected to underwater explosion, J Mater Eng Perform, ASM, 10, 66, 10.1361/105994901770345376 Brett, 2008, A study of explosive effects in close proximity to a submerged cylinder, Int J Impact Eng, 35, 206, 10.1016/j.ijimpeng.2007.01.007 Rajendran, 2008, Reloading effects on plane plates subjected to non-contact underwater explosion, J Mater Process Technol, 10.1016/j.jmatprotec.2007.12.022 Bjorno, 1976, Underwater explosion research using small amount of explosives, Ultrasonics, 263, 10.1016/0041-624X(76)90033-0 Deshpande, 2005, One-dimensional response of sandwich plates to underwater shock loading, J Mech Phys Solids, 53, 2347, 10.1016/j.jmps.2005.06.006 Baker, 1983 Xue, 2003, Preliminary assessment of sandwich plates subject to blast loads, Int J Mech Sci, 45, 687, 10.1016/S0020-7403(03)00108-5 Rajendran, 2007, Of underwater explosion experiments on plane plates, Exp Techniques, 31, 18, 10.1111/j.1747-1567.2006.00130.x Rajendran, 2006, A shock factor based approach for the damage assessment of plane plates subjected to underwater explosion, J Strain Anal Eng Des, 41, 417, 10.1243/03093247JSA120