A non-local approach to model the combined effects of forging defects and shot-peening on the fatigue strength of a pearlitic steel

Theoretical and Applied Fracture Mechanics - Tập 93 - Trang 19-32 - 2018
Benjamin Gerin1,2, Etienne Pessard1, Franck Morel1, Catherine Verdu2
1LAMPA, Arts et Métiers ParisTech Angers, 2 Bd du Ronceray, 49035 Angers Cedex 01, France
2MATEIS, INSA de Lyon, Bâtiment St Exupery, 20 av Jean Capelle, 69621 Villeurbanne Cedex, France

Tài liệu tham khảo

Shahzad, 2010, Influence of anodizing process on fatigue life of machined aluminium alloy, Procedia Eng., 2, 1015, 10.1016/j.proeng.2010.03.110 Chomienne, 2014 Souto-Lebel, 2011, Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life, Procedia Eng., V19 Shang, 2016, Research on the stamping residual stress of steel wheel disc and its effect on the fatigue life of wheel, Int. J. Fatigue, 93, 173, 10.1016/j.ijfatigue.2016.08.020 Dehmani, 2016, Experimental study of the impact of punching operations on the high cycle fatigue strength of Fe-Si thin sheets, Int. J. Fatigue, 82, 721, 10.1016/j.ijfatigue.2015.09.030 Murakami, 1986, Effects of hardness and crack geometries on ΔKth of small cracks emanating from small defects, 275 Murakami, 2002 Billaudeau, 2004, Multiaxial fatigue limit for defective materials: mechanisms and experiments, Acta Mater., 52, 3911, 10.1016/j.actamat.2004.05.006 Pessard, 2014, The effect of quenching and defects size on the hcf behaviour of boron steel, Int. J. Fatigue, 68, 80, 10.1016/j.ijfatigue.2014.06.002 Guerchais, 2014, Micromechanical investigation of the influence of defects in high cycle fatigue, Int. J. Fatigue, 30, 2119 Chantier, 2000, Probabilistic approach to predict the very high-cycle fatigue behaviour of spheroidal graphite cast iron structures, Fatigue Fract. Eng. Mater. Struct., 23, 173, 10.1046/j.1460-2695.2000.00228.x Nadot, 2004, Influence of casting defects on the fatigue limit of nodular cast iron, Int. J. Fatigue, 26, 311, 10.1016/S0142-1123(03)00141-5 Morel, 2009, Comparison between defects and micro-notches in multiaxial fatigue – the size effect and the gradient effect, Int. J. Fatigue, 31, 263, 10.1016/j.ijfatigue.2008.09.005 Koutiri, 2013, High cycle fatigue damage mechanisms in cast aluminium subject to complex loads, Int. J. Fatigue, 47, 44, 10.1016/j.ijfatigue.2012.07.008 Le, 2016, Simulation of the Kitagawa-Takahashi diagram using a probabilistic approach for cast Al-Si alloys under different multiaxial loads, Int. J. Fatigue, 93, 109, 10.1016/j.ijfatigue.2016.08.014 Serrano-Munoz, 2016, Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy, Int. J. Fatigue, 82, 361, 10.1016/j.ijfatigue.2015.07.032 Léopold, 2015, Influence of artificial and casting defects on fatigue strength of moulded components in Ti-6Al-4V alloy, Fatigue Fract. Eng. Mater. Struct., 10.1111/ffe.12326 Gariépy, 2013, Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351, Surf. Coat. Technol., 219, 15, 10.1016/j.surfcoat.2012.12.046 Bhuiyan, 2012, The influence of mechanical surface treatments on fatigue behavior of extruded az61 magnesium alloy, Mater. Sci. Eng.: A, 549, 69, 10.1016/j.msea.2012.04.007 McKelvey, 2012, Surface finish effect on fatigue behavior of forged steel, Int. J. Fatigue, 36, 130, 10.1016/j.ijfatigue.2011.08.008 Sakamoto, 2014, Effect of fibprocessed sharp flaw on fatigue limit of shot peened medium carbon steel, 86 Sakamoto, 2015, Effect of surface flaw on fatigue strength of shot-peened medium-carbon steel, Eng. Fract. Mech., 133, 99, 10.1016/j.engfracmech.2014.11.005 Kim, 2013, Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steel, Int. J. Fatigue, 114, 10.1016/j.ijfatigue.2013.07.001 Arola, 1999, An examination of the effects from surface texture on the strength of fiber reinforced plastics, J. Compos. Mater., 33, 102, 10.1177/002199839903300201 Peterson, 1974 Suraratchai, 2008, Modelling the influence of machined surface roughness on the fatigue life of aluminium alloy, Int. J. Fatigue, 30, 2119, 10.1016/j.ijfatigue.2008.06.003 Le Pécheur, 2012, Polycrystal modelling of fatigue: pre-hardening and surface roughness effects on damage initiation for 304L stainless steel, Int. J. Fatigue, 45, 48, 10.1016/j.ijfatigue.2012.06.014 Guilhem, 2014, Effects of surface roughness on plastic strain localization in polycrystalline aggregates Kitagawa, 1976, Applicability of fracture mechanics to very small cracks or cracks in the early stage, 627 Fathallah, 2004, High cycle fatigue behavior prediction of shot-peened parts, Int. J. Fatigue, 26, 1053, 10.1016/j.ijfatigue.2004.03.007 Taylor, 1999, Geometrical effects in fatigue: a unifying theoretical model, Int. J. Fatigue, 21, 413, 10.1016/S0142-1123(99)00007-9 Taylor, 2007 Susmel, 2008, The theory of critical distances: a review of its applications in fatigue, Eng. Fract. Mech., 75, 1706, 10.1016/j.engfracmech.2006.12.004 Taylor, 2011, Applications of the theory of critical distances in failure analysis, Eng. Fail. Anal., 18, 543, 10.1016/j.engfailanal.2010.07.002 Taylor, 2002, Some new methods for predicting fatigue in welded joints, Int. J. Fatigue, 24, 509, 10.1016/S0142-1123(01)00174-8 Crupi, 2005, Fatigue assessment of welded joints using critical distance and other methods, Eng. Fail. Anal., 12, 129, 10.1016/j.engfailanal.2004.03.005 Araújo, 2017, A multiaxial stress-based critical distance methodology to estimate fretting fatigue life, Tribol. Int., 108, 2, 10.1016/j.triboint.2016.07.028 Zheng, 2013, Numerical modeling of fatigue crack propagation based on the theory of critical distances, Eng. Fract. Mech., 114, 151, 10.1016/j.engfracmech.2013.10.018 El May, 2015, Non-local high cycle fatigue strength criterion for metallic materials with corrosion defects, Fatigue Fract. Eng. Mater. Struct., 38, 1017, 10.1111/ffe.12329 Herasymchuk, 2015, Fatigue life calculation for titanium alloys considering the influence of microstructure and manufacturing defects, Int. J. Fatigue, 81, 257, 10.1016/j.ijfatigue.2015.08.008 Benedetti, 2016, On the combination of the critical distance theory with a multiaxial fatigue criterion for predicting the fatigue strength of notched and plain shot-peened parts, Int. J. Fatigue, 93, 133, 10.1016/j.ijfatigue.2016.08.015 Morançais, 2016 Gerin, 2017, Influence of surface integrity on the fatigue behaviour of a hot-forged and shot-peened C70 steel component, Mater. Sci. Eng. A, 686, 121, 10.1016/j.msea.2017.01.041 Gumbel, 1958 Murakami, 1989, Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. ii: Fatigue limit evaluation based on statistics for extreme values of inclusion size, Int. J. Fatigue, 11, 299, 10.1016/0142-1123(89)90055-8 Geuzaine, 2009, Gmsh: a threedimensional finite element mesh generator with built-in pre- and post-processing facilities, Int. J. Numer. Meth. Eng., 79, 1309, 10.1002/nme.2579 Robert, 2015, A comparison between different numerical methods for the modeling of polycrystalline materials with an elastic-viscoplastic behavior, Comput. Mater. Sci., 103, 134, 10.1016/j.commatsci.2015.03.028 Dang Van, 1993, Macro-micro approach in high-cycle multiaxial fatigue, 120